when installing axles... always use anti-seize on the teeth of the axles that connect with the hub, and applying a little bit of axle-grease to the transmission side of the axle-threads to help install them.
If you don’t have a press but you have a couple of days to spare on your hands with an axel stuck in the hub just soak it with break fluid every day for a couple of days then use a puller with an impact gun. May have to get a new wheel bearing and hub since they’re already messed up anyways but you save the spindle and axel
Serg...what flywheel and clutch setup would you recommend for K24A4 block w/24A2 rotating assembly swapped into 04 Civic Si EP3 w/6 speed transmission also? Want to keep close to stock pedal feel but get the most out of the swap both on the street and strip from time to time?
Hey, your videos are really helpful. I have a question, i have a hard time putting my driver side axle all the way in, feels like the circlip doesent want to lock in. The axle goes all the way in without the circlip, got a new clip from my acura dealer, do you think thats what is wrong with it?
What your customer needs to do is send that exhaust back and work on the basics lolololol! He need motor mounts before making his car all loud, he should also go RBC before a dang exhaust lolol! SCRATCH THAT, GET SOME DAMN AXLES!!! LOLOL
Seat time matters when it comes to welding. It took me about a week to learn how to properly set my machine,depending on material and gauge. Another yr to get really good at it. Layouts,fab and seat time. Just keep at it. Saves headaches and makes money,can't lose.🔫🔫🔥🔥
when installing axles... always use anti-seize on the teeth of the axles that connect with the hub, and applying a little bit of axle-grease to the transmission side of the axle-threads to help install them.
If you don’t have a press but you have a couple of days to spare on your hands with an axel stuck in the hub just soak it with break fluid every day for a couple of days then use a puller with an impact gun. May have to get a new wheel bearing and hub since they’re already messed up anyways but you save the spindle and axel
2023 and I’m here watching
Man bro ur blowing up I was here before 20 subs now ur over 17k well deserved Gratz bud
glad you're still around bro
"down to the rivs"
Serg...what flywheel and clutch setup would you recommend for K24A4 block w/24A2 rotating assembly swapped into 04 Civic Si EP3 w/6 speed transmission also?
Want to keep close to stock pedal feel but get the most out of the swap both on the street and strip from time to time?
clutch masters FX300, perfect street and strip clutch
@@SERGMOTIVEGARAGE Thank you Serg! What about a flywheel?
Kicked my ass too man. I hate doing the clutch
Nice man
What was that weird noise when it turns on ? 🤔
engine cover was rattling on the manifold
When you already replace the clutch 4 times and on the fifth you take it apart and it was the trans not the clutch 😢😢
I learn a lot with your videos i want your channel to grow up you deserve it 👍
thanks!
I miss my soupp. clean car!
Hey bro I see you are in NJ do you have a business IG to get a hold of you. I’m in nj too
Nice video, what brand were the old OE clutch kit and flywheel?
What wheels and tires you got they look nice 👍🏽
Nice job.... Whats a job like this go for? $
have to do my Miata clutch soon
This is why I'll pay someone else do a clutch job. If that happened to me, I'd SOL since I know nobody with a press.
Hey, your videos are really helpful. I have a question, i have a hard time putting my driver side axle all the way in, feels like the circlip doesent want to lock in. The axle goes all the way in without the circlip, got a new clip from my acura dealer, do you think thats what is wrong with it?
Could you let me know what I would need to install a kill switch or make a video installing one
serg can I cancel my ac and ps without having to buy some extra apart ?? and congratulate you for a great job
How do I contact to have work done
Loving the content. Whenever I have axle nuts that are being stubborn I take an air hammer to them.
Why no bread?
Whaddup man! Time for a car lift!
tell me about it lol
It was very informative 👍👍👍👍👍
Why's he wearing the mall and you're not haha
What your customer needs to do is send that exhaust back and work on the basics lolololol! He need motor mounts before making his car all loud, he should also go RBC before a dang exhaust lolol! SCRATCH THAT, GET SOME DAMN AXLES!!! LOLOL
Seat time matters when it comes to welding. It took me about a week to learn how to properly set my machine,depending on material and gauge. Another yr to get really good at it. Layouts,fab and seat time. Just keep at it. Saves headaches and makes money,can't lose.🔫🔫🔥🔥
Lmao Yo Kenny's the shit
I want to see you race kenny lol!
its coming!