@@Schlipperschlopper not "soon", and definitely not within the next century. There is still no viable alternative. EVs are still a gimmick, battery technology is ages away from being good enough for EVs to fully replace other vehicles, and until fusion reactors become a reality, worldwide electrity production will not be adequate to fully replace all vehicles with EV equivalents. The production of li-ion batteries is still massively polluting and destroys the planet, and the materials that go into the batteries cannot be reclaimed - they're harder to recycle than lead acid batteries and once broken down, cannot be turned into new batteries. Personal vehicles are doomed no matter what, but it will be a long time and require a drastic event before the world's countries realize they need to invest in proper alternate solutions
I was a big time ebayer at one time until they taxed it. I sent a 62 Plymouth pass side convertible latch that I got at Carlisle to Sweden for a outlandish amt of cash, he HAD to have it.
@Schlipperschlopper That is actually wrong only only the sale of new gas and diseal cars will be ban. old cars and vintage and I think even home made engines are still legal and will always be legal, maybe a bit harder to drive. Don't worry about vintage they aren't going anywhere heck there are even people who make parts for vitnage cars.
I just watched an episode of "Uncle Tony's Garage" which featured the Chrysler EFI developed during the '50s. According to Tony an electronics engineer bought one of these '58 EFI equipped cars recently. It had been converted to carburetors but a fellow enthusiast told him he knew a guy who was a Chrysler dealer in the '50s who still had an original '58 EFI setup on a shelf at his garage. The engineer bought it and restored the engine to original specs. It ran like crap! He decided to find out why. He started running tests and traced the problem to the paper/foil capacitors in the control module. It turns out they were fragile and VULNERABLE TO EMF RADIATION! While testing the cars, Chrysler engineers were driving them on test tracks or rural areas and they ran fine. When they sold the cars and customers began driving them "in town" they would pass by Neon signs, radio stations and other sources of radio emissions which would make the EFI injection go haywire. The electronic engineer who had the car replaced all the old original capacitors with modern ones and the car ran beautifully. Tony headlined the car as the only EFI equipped '58 Chrysler in existence but watching this video reminded me of Pers 300D. I know Per has upgraded his engine as well and it runs great! I thought you might enjoy this bit of automotive history (trivia) :) BTW, I wish to compliment Per on the superb job he did on his 300D! I know for you guys, it's just another day at the shop but I want to go on record as saying I appreciate the wonderful work done at Big Dog!
I really enjoyed your story, BECAUSE, many years ago a fella bought a VW TYPE 3 Squareback. Once in a while, when he drove by the local US. Air Force base, it would conk out. After a while, it was determined that something at the base would interfere with the Squareback's computer. He stopped driving near the base and everything was good. Radar of some kind they figured.
in the early post-war era when electronics were a cutting edge science, there were few people who understood the effects of EMF radiation on devices that relied on electric current to operate. The key word is "magnetic" and the profound effect it has on these devices is noteworthy. The challenges involved in transmitting, shielding and controlling magnetic energy. are immense. I believe the only person who understood the relationship between magnetism and electricity even partly was Nicola Tesla and his work was ruthlessly suppressed by those who sought to amass a fortune through the sale and control of electrical power. Tesla dreamt of free electrical power transmitted wirelessly over the entire earth. This did not fit in the plans of those who sought to control and profit by this technology and so it was suppressed. I am happy to live in a Capitalist society but it can have it's down side and this is an example of such. I still believe that the pluses outweigh the minuses and the minuses are being dealt with however slowly. In the meantime, we can enjoy fiddling with the occasional examples of how our ignorance of these phenomena cause havoc in our daily lives. Cheers!
Now this was a "normal" conversation, no dude rattling off specs like he's been studying all week to cram for a test. Beautiful car, it was like watching a couple of buddies heading back from the parts store.
this was the most modified kind of 300 in history its the original duke of hazard, the general lee, mooshiners they modified these more than car nerds today
Huge attention to detail, beautiful work on a car that needed a lot of time and effort. The fact that he made the modern systems look like the original pieces really shows his commitment.
Another of my favorite type of JLG episodes. No product placements, no custom builder hawking his latest unobtanium ride, no factory hype PR guys.... just a great "in house" classic ride. That it's Per's personal project makes it even sweeter and the icing on the cake is that it is no doubt THE nicest factory American hotrod of 1958 - and arguably, ever. (Of course, it doesn't hurt that she's a first gen Hemi Mopar, either. :-)) Jay goes from boss and/or owner here to being presenter/fellow admirer - not to mention, these guys are no doubt longtime buddies, too. His contribution (allowing Per to do this car in-house) is to be commended and he takes great pride in his friends' accomplishment. Just good stuff, all the way around. Thanks, Jay. AWESOME job, Per!
Jay is a great man for giving all of these automotive master craftsmen and mechanics and machinists a place to work on all of these pieces of history, just imagine working for Jay Leno at his garage restoring and maintaining these beautiful cars and motorcycles, he has to be the best boss ever!!! All of his employees have full health insurance, retirement and other benefits, plus they get to work on side jobs and their own cars at the shop when they’re not working on Jay’s stuff, a total dream job!!! Jay is what all business owners should inspire to be, he takes care of his employees and they take care of him!!!👍👍👍
Never saw that kewl Fuel Injection 300D emblem before... didn't know there ever was one... Owner misspoke on the HP... dual quads 375 HP in '57, 380 HP in '58, 390 HP w/ EFI... he said 280 and 290...
@@BuzzLOLOL I can't remember for sure but I think they tried the fuel injection on a few others that year. Desoto's Adventurer, Dodge 500 and the Plymouth Fury. Basically the same and with the same problems.
@@halleffect1 - Yeah, the big leap is to gasoline Direct Injection (like a diesel uses)... gas can't detonate/spark knock early if it isn't even in the cylinder yet...
I miss those cars. I had 300's in 1955, 1956, 1957 year models. 57 was my favorite. Rebuilt several cast iron hemi engines, 2 speed and 3 speed trans. This was before complete body off work was done much. Dad put a 56 300 engine into a 40 Continental.
@@ldnwholesale8552 Yep, unfortunately, 1957 and 1958 Chryslers were notorious for rust issues, even way back then. It was bad enough that people were bringing the cars back for rust repairs. These "forward Look" Mopars were a huge hit when they came out, and Chrysler saw what was probably its strongest sales figures to date when they came out! Then came the issues with the Chryslers rusting, and the Plymouths rattling, which cost them big. They fixed it for 1959, but the damage was done. It was a black eye for Chrysler, who was known for being "The Engineering company". They made a beautiful car, but rushed to get them in for 1957, and forgot to do their rustproofing. They goofed up and did it again in 1976, with the Dodge Aspen/Plymouth Volare twins. Long Story short, those 1957 and 58 Chryslers are beautiful, but look out for rust.
@@Ritalie yes. Car building in Sweden is very DIY...and if you can't do it, you don't get to have it. Custom car shops are not a thing, there are club garages at most. This produces a lot of skilled body men, and some go to the US to perhaps make a carreer out of it. Boyd Coddington had an "emergency body man" who was called in when a build was in trouble...called Bernt, google "pink lady vw" to see a beatle build he did before moving over seas.
@@Ritalie In every, even the smallest villages in Sweden you will find at least one US car fanatic. As a car guy from Sweden, i could easy name at least ten people i know well that has their own workshop and some US cars. And i am not even in to US cars.
A self-winding clock inside the steering wheel - those are lovely details. To me this is a well done subtle upgrade of the original. No purist but far from restomodded to infinity and beyond.
@@AB-80X In all honesty, I'am not really a fan of the 59 Cadillac. the 60 is better but I'am more of a fan of the 56-58 body. If I had to pick from this era I'd choose a 58 caddie or one of the other great GM cars. I'd love a chrysler 300 but they're like 90- 100K
They sound great but this particular Chrysler actually has a Wankel rotary engine. It was the only engine they could get the fuel injection to work with.
I’d love to meet Jay one day. The fact that he lets his guys use his shop to work on their stuff speaks volumes about his character. Just a down to earth gear head
the throb of the engine is to die for,you know there is a ''real mother ''under the hood.i had a chrysler royal in the day nothing like this work of art.is it me or im imagining things ,at the bottom of the drivers door front corner looks like there is a gap. beautiful car .
Jay is the absolute definition of class. Always honoring the owners of the cars he shows and the people who help him keep his amazing collection as flawless as it is. I really miss him on late night TV.
Yes it is stunning, and a completely different take on the 1950's "Rocket" theme with the tail fins and all. Plus the steering wheel self winding clock Wow! We live in an Amazing futuristic world.
Honestly, all Jay's videos get a like before I watch. I'm sure they are produced with the intention of them being included in the museum when Jay dies. Quality videos that come out on a regular schedule . . . you can't beat that.
An amazing resto of a very special Chrysler. Per is one humble master craftsman and it warms my heart to see him and Jay out cruising with big grins on their faces. Well done!
20yrs ago I'd look at this car as complete and total ho humville... Now that these pre muscle cars have grown on me with a little age, I have to say Damn! That's a beautiful car! Then there's the rarity that just makes it an awesome part of automotive and especially Mopar history. Thank you so much for sharing your piece of rolling art!
I honestly got to say the one thing you got love about American cars from the 50's is the head room plus the fins. Jay you looked happy rolling around thanks for the entertainment Jay.
Beautifully done Per.. can't go wrong with the old Chryslers/ Dodge.. I had two 63 Plymouth Belvedere's one had a slant 6 with the 3-speed and the other had a 440 cid motor, push button torqueflite.. both of them were excellent cars to get into and just go for a drive.. just don't make them like that anymore..... Thanks for sharing guys Izzy ..
I love how these old hemi engines sound. That heavy thump in the exhaust note. At idle it just sounds so good. And under load.. I wouldn't mind having this car's sister the 58 Plymouth Fury. Most are either crushed or rusted beyond repair. Nice car my friend. Very nice. Looks amazing.
Car never came with seat belts. Most older people drove half their life not wearing them and they lived this long. I never wore them until the late 90s myself.
"Most older people drove half their life not wearing them and they lived this long." Most people don't actually have to get their insurance to protect their house for much of their lives, but they still get it anyway because that one time you _need_ it and not have it, you _really_ want it.
@@SelfReflective Big difference going to war and driving a car. Growing up no one wore seat belts and if you did you called a wussy. Wasnt like they was flaming wrecks ever 1/4 mile down the road with bodies strewn everywhere.
Jay seems to be an ideal boss for creative people: kind and gives them room and time to work on their personal projects. His workers are undoubtedly loyal, too.
But the handling sucked back then!...you really would not want to be breaking 100 in these barges...not well-controlled at those speeds...suspensions were just not up to it....true even 10 years later, with the muscle cars of the 60s...lotta dudes lost their lives showing off in those things!
Raggare...it's still a huge culture in Sweden...here's some footage from the 60's and 70's: * Banned from pubs and dancing places...trying to get a clubhouse ua-cam.com/video/Qp2hneLaV2U/v-deo.html * Raggare and Police ua-cam.com/video/Ar67F29d9p0/v-deo.html
What a genuinely nice guy Per is and a great car too - I think the styling is pretty cool. That's a lot of horsepower for 1958, isn't it? It's interesting that big classic American cars are so popular in Sweden.
I am Swedish and i agree. Can´t explain why. But there are thousands of classic US cars here. And in absolutely every town, city and village, there is always someone. I live in a very small village in a rural area. And it´s common to see a 50´s Cadillac, and a few more. My friend has a Camaro. And 10 minutes away is another tiny village. There we actually have a museum with plenty US classics. And also. Another guy has started a restaurant with real American 50´s feeling. Every evening, people drive there in their own classics. Oh, i forgot... 30 minutes away is also a much bigger "real" museum with a huge collection. And this is only one of many. Last but not least, in the same area we have a high end shop that restore US cars. And that is run by another Swede that have been working in the US on restoring cars. And the crazy thing is that i am not even surprised of all this. Look up Mjöbäck in the south of Sweden. All i talk about is around this little tiny village. I guess we really like the American way of life here.
Both New Zealand and Australia also have large numbers of resto USA cars and a considerable number were actually assembled in right hand drive in Australia. Chryslers, Desoto's, Dodge's were assembled in Adelaide, South Australia and the build quality was often better, revised springs were sometimes installed to suit Australian road conditions. As in California Nevada, Arizona the dry hotter Southern Australian weather allowed better longetivity from rust. In the early 70's I owned an Australian assembled right hand drive 1959 Desoto Firesweep with the 361 BB Torqueflite, however this would equate to the US 1958 model, regret selling it. Ford Australia even made 1953 through 1958 (I think) two door utilities known as a Mainline coupe utility. Thes were Customlines with a Ranchero style rear predating the El Comino Chevs and Rancheros. They were fitted with 272 or 292 Y blocks and exported to New Zealand and some to South Africa. GM Ford and Chrysler built Australian versions of American cars until very recently including the 2 door Pontiac Transam which was a left hand drive version of an Australian designed and built Holden (GM Australia) Monaro and exported to the US.
Awesome car!!! Beautiful restoration!!! The '57 & '58 Chryslers were some of my favorite cars... Especially with fuel inj.!!! But I like the dual quads the majority of the 392's had... Awesome episode!!!
Jay: I like that it still has the orighinal generator Man: No that's a upgrade Jay: oh Jay: I like how you upgraded the battery yet kept the old cover on it, cause the old battery would spill acid everywhere.. Man: No that's the original battery Jay: oh
That is one of the most beautiful cars that Chrysler ever made. As a child I had an expensive 1/25th scale model of a 1958 Chrysler 300D that was almost exactly like the car that Per restored. Same color. Save interior. And so well detailed that I was in love with it. And I'm still in love with those cars. And it's the little styling details that made them so beautiful. Too bad that they rusted out. Such a shame. Great restoration Perl! Thank you for saving this car.
Or...being a little kid and standing up on the floor behind the front seats and looking over the shoulders of mom and dad in the front seat. I fondly remember those days in my dad's 2 door 396 Pontiac Parisienne with powerglide...
@@MarinCipollina Nice memories.and a great ride! A time when we all lived, and survived with no seat belts, no child seats, no helmets for bicycles/roller skates/skateboards and spending all day playing outside in the neighborhood park climbing trees with no supervision... let alone playing with my prized Daisy BB gun, and all as a pre-teen. Ah, great times!!
Yes, thanks... interestingly, my Parents had a **1959 DODGE 9 Pass Wagon ( rear Face / Push- Button,V8,ps/P Brake:: massive room) fir a barely 12 years Old, then driving it for a short time with New Drivers License(* wondering about dating Girls in A wagon).......
That has to be the finest restoration I've ever seen. They didn't spend much time on the interior, alas, because the interior is immaculate. I hope Jay and Per will revisit this car in detail. A two hour documentary would be nice. This car is truly exceptional. And I say again: there is room on Mt. Rushmore for Jay Leno. He is an American institution.
It was a show stopper when he brought it out to Coffee ‘n Cars Valencia.. really nice man, patient with everybody asking him “all kinds of questions”... I hope he brings it out again soon...
The original fuel injection was made by Bendix (another swede name) . It could have worked but it was beyond the understanding of most mechanics of the day. So Bendix Corp. sold it to Bosch who sold it to VW for use on the type 3 and it became the Djet ,which still work fine today. It's real automotive stoneage stuff though,no oxy sensor and no diagnostic ports or codes,so it's as Per Described the Bendix system,no actual computer like today,just a switch box with transistors using the heat,air temp and manifold vacuum to measure fuel delivery against the throttle position switch ,which activates the injectors.
Even though the unit didn't work too well, let's not overlook the fact that in 1958 Chrysler was introducing electronic fuel injection and in-tank fuel pumps.
@@BuzzLOLOL Many, many videos when, I assume post editing, do not have the sound up to the levels they need to be. Someone editing may be wearing headphones and think sound levels are just fine. But, as you said, different systems have different outputs. I have noticed that many recordings of music seem to have the audio set right--likely because the people putting them up are highly aware of audio--but some videos with a lot of dialog are recorded way low. Your sound should be peaking right below the level of distortion when you do your edit, allowing the listener to set the audio to their level of comfort--but this is not always the case.
hey Guys, that was just wonderful ! Prime example of : 'Perfect is Good Enough' . Well done Per and Jay.... When I was a kid my Dad had a '57 Chrysler Windsor, 4 door, pea green, w/ the most Beautiful gold & tan brocade upholstery. That car had the 270 or 290 and could flat get it....2 weeks vacation w/ 3 kids in the back seat, pulling the camper around the country.
I worked for a Swedish company for 16 years, 2004-2020. Old American cars are a huge hobby in Sweden, even today. I've seen some real beauties.
Sadly soon all gas cars will be banned in EU, Scandinavia and most states of the USA!
@@Schlipperschlopper they’ll probably keep the bodies but change the drive trains to electric
@@Schlipperschlopper not "soon", and definitely not within the next century. There is still no viable alternative. EVs are still a gimmick, battery technology is ages away from being good enough for EVs to fully replace other vehicles, and until fusion reactors become a reality, worldwide electrity production will not be adequate to fully replace all vehicles with EV equivalents. The production of li-ion batteries is still massively polluting and destroys the planet, and the materials that go into the batteries cannot be reclaimed - they're harder to recycle than lead acid batteries and once broken down, cannot be turned into new batteries. Personal vehicles are doomed no matter what, but it will be a long time and require a drastic event before the world's countries realize they need to invest in proper alternate solutions
I was a big time ebayer at one time until they taxed it. I sent a 62 Plymouth pass side convertible latch that I got at Carlisle to Sweden for a outlandish amt of cash, he HAD to have it.
@Schlipperschlopper That is actually wrong only only the sale of new gas and diseal cars will be ban. old cars and vintage and I think even home made engines are still legal and will always be legal, maybe a bit harder to drive. Don't worry about vintage they aren't going anywhere heck there are even people who make parts for vitnage cars.
I just watched an episode of "Uncle Tony's Garage" which featured the Chrysler EFI developed during the '50s. According to Tony an electronics engineer bought one of these '58 EFI equipped cars recently. It had been converted to carburetors but a fellow enthusiast told him he knew a guy who was a Chrysler dealer in the '50s who still had an original '58 EFI setup on a shelf at his garage. The engineer bought it and restored the engine to original specs. It ran like crap! He decided to find out why. He started running tests and traced the problem to the paper/foil capacitors in the control module. It turns out they were fragile and VULNERABLE TO EMF RADIATION! While testing the cars, Chrysler engineers were driving them on test tracks or rural areas and they ran fine. When they sold the cars and customers began driving them "in town" they would pass by Neon signs, radio stations and other sources of radio emissions which would make the EFI injection go haywire. The electronic engineer who had the car replaced all the old original capacitors with modern ones and the car ran beautifully. Tony headlined the car as the only EFI equipped '58 Chrysler in existence but watching this video reminded me of Pers 300D. I know Per has upgraded his engine as well and it runs great! I thought you might enjoy this bit of automotive history (trivia) :) BTW, I wish to compliment Per on the superb job he did on his 300D! I know for you guys, it's just another day at the shop but I want to go on record as saying I appreciate the wonderful work done at Big Dog!
I really enjoyed your story, BECAUSE, many years ago a fella bought a VW TYPE 3 Squareback. Once in a while, when he drove by the local US. Air Force base, it would conk out. After a while, it was determined that something at the base would interfere with the Squareback's computer. He stopped driving near the base and everything was good. Radar of some kind they figured.
in the early post-war era when electronics were a cutting edge science, there were few people who understood the effects of EMF radiation on devices that relied on electric current to operate. The key word is "magnetic" and the profound effect it has on these devices is noteworthy. The challenges involved in transmitting, shielding and controlling magnetic energy. are immense. I believe the only person who understood the relationship between magnetism and electricity even partly was Nicola Tesla and his work was ruthlessly suppressed by those who sought to amass a fortune through the sale and control of electrical power. Tesla dreamt of free electrical power transmitted wirelessly over the entire earth. This did not fit in the plans of those who sought to control and profit by this technology and so it was suppressed. I am happy to live in a Capitalist society but it can have it's down side and this is an example of such. I still believe that the pluses outweigh the minuses and the minuses are being dealt with however slowly. In the meantime, we can enjoy fiddling with the occasional examples of how our ignorance of these phenomena cause havoc in our daily lives. Cheers!
@@edwardwerick2420 I hear U, that's like Tucker years ago, who was going to introduce too innovative an automobile, I remember what they did to him.
Really interesting, if they had figured it out, the fuel crisis problems might have been less severe for Chrysler.
Very nice info....heck today with all the.emf.cell towers and phones...the car would.not make.it out of the.dealership parking lot.
Now this was a "normal" conversation, no dude rattling off specs like he's been studying all week to cram for a test. Beautiful car, it was like watching a couple of buddies heading back from the parts store.
I guess that's because they know each other so well. To bad Jay isn't as close with everyone really, but can't change that.
@@basstrammel1322 Well Per Blixt is a Swede, We are like that you know.😋🇸🇪
I thought that Pers was a little bit argumentative, too quick to correct Jay...whatever, you can tell a Swede, but you cannot tell them much!...lol
this was the most modified kind of 300 in history
its the original duke of hazard, the general lee, mooshiners
they modified these more than car nerds today
Jay not only has an amazing collection. His team is a dream team of talent, passion & nice guys!
Jay Leno, what a respectable and gently funny guy, it's always a pleasure to watch your videos, you're full of class.
I was lucky enough to see him do a stand up set in Cleveland in the late 80s. He's an amazingly gifted comic, too. And, clean comedy.
Such a real human with manners and respect for everyone and everything. Zero ego. I see him at Pebble every year.
Haha ha
That was a time capsule under the hood with Per's insistence on originality. Very nice Per, congratulations.
But the most important part wasn't original.
@@PistonAvatarGuy Sure, but what would be the point of installing an original part that never worked right in the first place?
@@ErikJensenDetroit My point was that it's not much of a "time capsule," not that it should be all original.
Huge attention to detail, beautiful work on a car that needed a lot of time and effort. The fact that he made the modern systems look like the original pieces really shows his commitment.
@@PistonAvatarGuy , it is to me. And the junk was even removed.
Another of my favorite type of JLG episodes. No product placements, no custom builder hawking his latest unobtanium ride, no factory hype PR guys.... just a great "in house" classic ride.
That it's Per's personal project makes it even sweeter and the icing on the cake is that it is no doubt THE nicest factory American hotrod of 1958 - and arguably, ever.
(Of course, it doesn't hurt that she's a first gen Hemi Mopar, either. :-))
Jay goes from boss and/or owner here to being presenter/fellow admirer - not to mention, these guys are
no doubt longtime buddies, too. His contribution (allowing Per to do this car in-house) is to be commended
and he takes great pride in his friends' accomplishment.
Just good stuff, all the way around.
Thanks, Jay. AWESOME job, Per!
Bruce Alan thanks, I am sort of MOPAR , but Gas mileage was terrible,,
@Bruce Alan Years ago my dad inherited a DeSoto from his aunt with a small hemi. You're right, they weren't know for their fuel efficiency
Did Chrysler plug up the injector ports? IIRC, this car had direct injection.
57-58 Chrysler 300 are one of the most beautiful cars ever made. Just gorgeous
Jeremy Thompson I agree
My dad had one back in the day. I still remember how much fun it was to ride in.
This is an absolutely stunning restoration, with just the right upgrades to make it practical. Mr. Blixt, you are an artist. Well done, sir.
Congratulations, Per, your car is nothing short of fantastic!
Jay is a great man for giving all of these automotive master craftsmen and mechanics and machinists a place to work on all of these pieces of history, just imagine working for Jay Leno at his garage restoring and maintaining these beautiful cars and motorcycles, he has to be the best boss ever!!! All of his employees have full health insurance, retirement and other benefits, plus they get to work on side jobs and their own cars at the shop when they’re not working on Jay’s stuff, a total dream job!!! Jay is what all business owners should inspire to be, he takes care of his employees and they take care of him!!!👍👍👍
Great to see Per, he's always so up-beat. Great work man! :)
Never saw that kewl Fuel Injection 300D emblem before... didn't know there ever was one...
Owner misspoke on the HP... dual quads 375 HP in '57, 380 HP in '58, 390 HP w/ EFI... he said 280 and 290...
@@BuzzLOLOL I can't remember for sure but I think they tried the fuel injection on a few others that year. Desoto's Adventurer, Dodge 500 and the Plymouth Fury. Basically the same and with the same problems.
@@BuzzLOLOL that makes more sense, i was wondering how the modern injection picked up over 100hp
@@halleffect1 - Yeah, the big leap is to gasoline Direct Injection (like a diesel uses)... gas can't detonate/spark knock early if it isn't even in the cylinder yet...
Has to be the cleanest post-war US design of all.
Very elegant in that ivory color. Thanks for the show!
I worked part time at a Chrysler dealer when the D came out. It was a real hoot to drive. This one is beautiful.
I miss those cars. I had 300's in 1955, 1956, 1957 year models. 57 was my favorite. Rebuilt several cast iron hemi engines, 2 speed and 3 speed trans. This was before complete body off work was done much. Dad put a 56 300 engine into a 40 Continental.
This is a beautiful car. Long gone are those days of cars from Detroit with lasting beauty.
The difference between these older cars and modern is they were designed by passionate auto engineers,
Today's cars are designed by a computer.
@@gadsdenviper7149 You got that right my friend.
But none lasting sheetmetal. at least in the east.
@@ldnwholesale8552 Yes this is true. You think it was by design by the car company's 🤔.
@@ldnwholesale8552 Yep, unfortunately, 1957 and 1958 Chryslers were notorious for rust issues, even way back then. It was bad enough that people were bringing the cars back for rust repairs. These "forward Look" Mopars were a huge hit when they came out, and Chrysler saw what was probably its strongest sales figures to date when they came out! Then came the issues with the Chryslers rusting, and the Plymouths rattling, which cost them big. They fixed it for 1959, but the damage was done.
It was a black eye for Chrysler, who was known for being "The Engineering company". They made a beautiful car, but rushed to get them in for 1957, and forgot to do their rustproofing. They goofed up and did it again in 1976, with the Dodge Aspen/Plymouth Volare twins.
Long Story short, those 1957 and 58 Chryslers are beautiful, but look out for rust.
The guys get to restore their own stuff after hours . . . or during hours, if I'm not here. That was a boss joke that had me chuckling along with Jay.
Beautiful car, Per did a superb job. The color and paint are perfect.
0ⁿ
Drop dead gorgeous. Brilliant work, Per! And the sound of that 392 is mind-blowing.
This Chrysler is stunningly beautiful. A truly beautiful car and restoration Per! Thank you Per and Jay for sharing this amazing car with us!
AS usual, Swedish guys do a wonderful job on american classics. Good job and the bodywork comes great. Thanks for sharing.
Is that a normal thing?
@@Ritalie yes. Car building in Sweden is very DIY...and if you can't do it, you don't get to have it. Custom car shops are not a thing, there are club garages at most.
This produces a lot of skilled body men, and some go to the US to perhaps make a carreer out of it.
Boyd Coddington had an "emergency body man" who was called in when a build was in trouble...called Bernt, google "pink lady vw" to see a beatle build he did before moving over seas.
@@Ritalie In every, even the smallest villages in Sweden you will find at least one US car fanatic. As a car guy from Sweden, i could easy name at least ten people i know well that has their own workshop and some US cars. And i am not even in to US cars.
They are called Raggare, they love US culture and cars.
lobmin very cool information thanks
A self-winding clock inside the steering wheel - those are lovely details. To me this is a well done subtle upgrade of the original. No purist but far from restomodded to infinity and beyond.
Gorgeous car. I really want an old 50s era land yacht.
The 300 was actually designed as a mid-sized power coupe. Sort of like the CTS coupes today. It was really the first muscle car.
If you want a 50's land yacht, there are better cars for that. Imperial or '59/'60 Cadillac Series 62.
@@AB-80X In all honesty, I'am not really a fan of the 59 Cadillac. the 60 is better but I'am more of a fan of the 56-58 body. If I had to pick from this era I'd choose a 58 caddie or one of the other great GM cars. I'd love a chrysler 300 but they're like 90- 100K
Great Show Jay....loved all the 'chat' when running that ' Beauty '.
Cheers!
Chrylser Hemi's one of the best sounding American V-8's
nicely done that car is epic
They sound great but this particular Chrysler actually has a Wankel rotary engine. It was the only engine they could get the fuel injection to work with.
@@HerecomestheCalavera Did you watch the video? It is clearly a Hemi (even says FirePower on the valve cover).
it runs and sounds like a modern v8, thanks to the fuel injection
@@HerecomestheCalavera uhhhhhhhhhhhhh
Beautiful sound to that motor.
I’d love to meet Jay one day. The fact that he lets his guys use his shop to work on their stuff speaks volumes about his character. Just a down to earth gear head
This car is badass! One of my favorites
Agreed man....this car just screams BOSS !
the throb of the engine is to die for,you know there is a ''real mother ''under the hood.i had a chrysler royal in the day nothing like this work of art.is it me or im imagining things ,at the bottom of the drivers door front corner looks like there is a gap. beautiful car .
Im so proud to be a swede. Supergood work Per. Du måste ha världens bästa jobb.
This is pure STYLE ! Love this car. This is just rolling art, back when cars were “designed” with creativity. Thanks for sharing Per !
Not sure if this was the model with... swing out driver seats... which 50's mopars had.
Jay Leno... you are a legend. A living legend. A generous and genuine person on so many levels.
That 1958 Chrysler engine... one of my favourites. I still have the brochure...
That kick down sounds like like the Blues Brothers. Love it!
"It's gotta cop motah."
It does indeed! (Same Torque-flight transmission) And notice how quickly it shifts--just like Jay mentioned about the early drag racers using them.
“Cop brakes, cop shocks... and it was made before catalytic converters so it’ll run good on regular gas.”
Sunday is my favorite day of the week. Thanks Jay.
One of the best Charles Bronson interviews I’ve ever listened to.. what a beauty.
Jay is the absolute definition of class. Always honoring the owners of the cars he shows and the people who help him keep his amazing collection as flawless as it is. I really miss him on late night TV.
HIS CONSTANT JABS AT HIS GUEST WASN'T CLASSY.
@MICHGO1 Its called joking, very common thing among friends.
What would Conan say?
holy cow that car is beautiful.
Owner seemed pretty cool too.
Yes it is stunning, and a completely different take on the 1950's "Rocket" theme with the tail fins and all. Plus the steering wheel self winding clock Wow! We live in an Amazing futuristic world.
@@Korokukanas 提交參政言論執政者侵入行竊破壞性損譽品質廣告商標經商虧損嚴重影響力侵犯隱私條款及滅族摧毀危及到生命延續性罪行移交遣送出境海外執行革職處分資源成本違約資金賠償刑責責任巨額虧損金額債務危機處理
I am so glad to see his car finished.
Thank you Jay for letting yours guys do their cars.
I love you.
🙄🙄🙄🙄
That goes to show for Jay's character. He appreciates his employees while his employees appreciate him. It's nice to see that.
@@Tusuperbis Indeed. :)
This car gets a like before I even watch
Ditto.
Honestly, all Jay's videos get a like before I watch. I'm sure they are produced with the intention of them being included in the museum when Jay dies. Quality videos that come out on a regular schedule . . . you can't beat that.
Now that would be a fun ride to Las Vegas. I looks like it belongs on the strip.
I was so pleased to see this video show up.
An amazing resto of a very special Chrysler. Per is one humble master craftsman and it warms my heart to see him and Jay out cruising with big grins on their faces. Well done!
So cool of him to show his painter's car. I like the design of the older cars, these days they don't make them like they used to.
"Two old guys in a car talk about cars", I'd watch it
20yrs ago I'd look at this car as complete and total ho humville... Now that these pre muscle cars have grown on me with a little age, I have to say Damn! That's a beautiful car! Then there's the rarity that just makes it an awesome part of automotive and especially Mopar history. Thank you so much for sharing your piece of rolling art!
I love the way this car sounded on acceleration.
I liked it when Jay Leno said... there goes 5 bucks right there... and he makes that sucking noise! Hilarious!
I honestly got to say the one thing you got love about American cars from the 50's is the head room plus the fins. Jay you looked happy rolling around thanks for the entertainment Jay.
What a beauty. It's a joy to just drive these old killer classic cars, not to mention owning them.
What a great boss Jay Leno is.....How I would love to work for such a man!
This is one of the nicest running Chryslers. The shift quality of the transmission is outstanding.Thanks for showing it.
It sounds great too.
Leave it to Jay to have TOP Quality Help that is also a Great guy and shows respect.
I'd work just to have room/board in that shop.... Certified FORD/BMW TECH, but Muscle car (especially MOPAR) fanatic.
Jay Leno. Living the dream!
He not living the dream he has over shot the dream and is boarderline scrooge Mc Duck.
@@justinbustin677 LMAO
Employer and Employee conversation and relationship goals
In my humble opinion, this is the most beautiful car ever designed. Gorgeous.
These were thee ultimate factory executive hotrods in the late 50's.
And now I suddenly wanna watch Christine.
🤣🤣 What do you care if you get a little hair in your mouth.
@@fordsrule35 😅😅😅😅
BEAUTIFUL CAR!!! Excellent Restoration Per!!!!! Thank You For Sharing it With US !!!
Beautifully done Per.. can't go wrong with the old Chryslers/ Dodge.. I had two 63 Plymouth Belvedere's one had a slant 6 with the 3-speed and the other had a 440 cid motor, push button torqueflite.. both of them were excellent cars to get into and just go for a drive.. just don't make them like that anymore..... Thanks for sharing guys
Izzy ..
That interior is so beautiful and the car rumbles so nicely. Great conversation piece.
Now that is a truly beautiful car.
What a gorgeous car, and a true car guy, thanks to both Per and Jay.....nice Resto
Not a resto. Just a couple of parts.
Love how even the most non-descript cars in Jay's garage are unicorns.
I don't think anybody has ever called a letter car non-descript.
Thanks Jay... another great automobile from the King of UA-cam automotive videos...
Just watching it move down the road and seeing the interior of that thing just feels welcoming and at home, with a hint of belonging.
*Doug Demuro enters the chat*
I love how these old hemi engines sound. That heavy thump in the exhaust note. At idle it just sounds so good. And under load.. I wouldn't mind having this car's sister the 58 Plymouth Fury. Most are either crushed or rusted beyond repair. Nice car my friend. Very nice. Looks amazing.
Jay "No seatbelts, we die like real men" Leno
Car never came with seat belts. Most older people drove half their life not wearing them and they lived this long. I never wore them until the late 90s myself.
"Most older people drove half their life not wearing them and they lived this long."
Most people don't actually have to get their insurance to protect their house for much of their lives, but they still get it anyway because that one time you _need_ it and not have it, you _really_ want it.
It doesn't have seatbelts.
@@Troy_nov1965 And if you count only soldiers who returned alive, you realize no one dies in wars.
@@SelfReflective Big difference going to war and driving a car. Growing up no one wore seat belts and if you did you called a wussy. Wasnt like they was flaming wrecks ever 1/4 mile down the road with bodies strewn everywhere.
Awesome ride. Have always loved Chrysler since I was a kid.
A gorgeous automobile, it has a very timeless look.
Incredible craftsmanship and dedication. Great job, Per, and thanks from the UK for sharing your beautiful car with us.
Jay seems to be an ideal boss for creative people: kind and gives them room and time to work on their personal projects. His workers are undoubtedly loyal, too.
The most beautiful car in that era, Exner I believe. The rear license plate frame is awesome too!
150 MPH Speedometer. Whew! Shift gears sqeech tires. Sweet!
57-8 Plymouth Fury also had a 150 mph speedometer, as did DeSoto Adventurer. I don't believe the Dodge D500s did.
But the handling sucked back then!...you really would not want to be breaking 100 in these barges...not well-controlled at those speeds...suspensions were just not up to it....true even 10 years later, with the muscle cars of the 60s...lotta dudes lost their lives showing off in those things!
It *LUCKILY* even avoided the "Cash for Clunkers" program. A+ & thank you very much for sharing your continued videos. Much respect.
That program didn't cover anything before 1984.
@@HunterShows I DID NOT KNOW THAT! I always thought that they wanted all of the heaviest "BOATS" out there. Thanks!
Truly a Beautiful Brute! Besides everything else, it sounds fantastic. Great job restoring this Beast!
Jay, I think it would great if you would do a back story on all the guys who work at your place and how they came to work for you.
Maybe the perfect car. Tastefully upgraded where needed without taking away from Virgils perfect design.
Brad Last Name love how they left it mostly stock with the modern fuel injection like that to improve the drivability
I agree
Holy Cow, Per Blixt was a bebopin’ Hepcat back in sweden! Rockabilly Rules!
Raggare...it's still a huge culture in Sweden...here's some footage from the 60's and 70's:
* Banned from pubs and dancing places...trying to get a clubhouse ua-cam.com/video/Qp2hneLaV2U/v-deo.html
* Raggare and Police ua-cam.com/video/Ar67F29d9p0/v-deo.html
lobmin Yeah, but Raggare is still related to Greaser (Rockabilly) culture and i heard him say “slicked back hair” or something
@@torobravo6147 oh yes, that's where it came from...seeing James Dean in the movies and such.
lobmin yup
Oh yeah, they build some awesome custom choppers too....they definitely love 50's/60's Kustom Kulture
Great that Jay has a great relationship with the guys in the shop.
What a genuinely nice guy Per is and a great car too - I think the styling is pretty cool. That's a lot of horsepower for 1958, isn't it? It's interesting that big classic American cars are so popular in Sweden.
I am Swedish and i agree. Can´t explain why. But there are thousands of classic US cars here. And in absolutely every town, city and village, there is always someone. I live in a very small village in a rural area. And it´s common to see a 50´s Cadillac, and a few more. My friend has a Camaro. And 10 minutes away is another tiny village. There we actually have a museum with plenty US classics. And also. Another guy has started a restaurant with real American 50´s feeling. Every evening, people drive there in their own classics. Oh, i forgot... 30 minutes away is also a much bigger "real" museum with a huge collection. And this is only one of many. Last but not least, in the same area we have a high end shop that restore US cars. And that is run by another Swede that have been working in the US on restoring cars. And the crazy thing is that i am not even surprised of all this. Look up Mjöbäck in the south of Sweden. All i talk about is around this little tiny village. I guess we really like the American way of life here.
Both New Zealand and Australia also have large numbers of resto USA cars and a considerable number were actually assembled in right hand drive in Australia.
Chryslers, Desoto's, Dodge's were assembled in Adelaide, South Australia and the build quality was often better, revised springs were sometimes installed to suit Australian road conditions.
As in California Nevada, Arizona the dry hotter Southern Australian weather allowed better longetivity from rust.
In the early 70's I owned an Australian assembled right hand drive 1959 Desoto Firesweep with the 361 BB Torqueflite, however this would equate to the US 1958 model, regret selling it.
Ford Australia even made 1953 through 1958 (I think) two door utilities known as a Mainline coupe utility. Thes were Customlines with a Ranchero style rear predating the El Comino Chevs and Rancheros.
They were fitted with 272 or 292 Y blocks and exported to New Zealand and some to South Africa.
GM Ford and Chrysler built Australian versions of American cars until very recently including the 2 door Pontiac Transam which was a left hand drive version of an Australian designed and built Holden (GM Australia) Monaro and exported to the US.
Absolutely stunning automobile...
from here in The Motor City, back when we were The Car Capitol of the World.
(R.I.P.)
Awesome car!!! Beautiful restoration!!! The '57 & '58 Chryslers were some of my favorite cars... Especially with fuel inj.!!! But I like the dual quads the majority of the 392's had... Awesome episode!!!
This car is gorgeous and it sounds fantastic-another excellent find!
Love it! Thank you for saving another beautiful automobile. Wish I had the money, expertise and time for something like this.
Jay: I like that it still has the orighinal generator
Man: No that's a upgrade
Jay: oh
Jay: I like how you upgraded the battery yet kept the old cover on it, cause the old battery would spill acid everywhere..
Man: No that's the original battery
Jay: oh
Is that the original 300d emblem? Yes. But no.
😂😂😂
😂😂😂
Don't know what is real and what is not :D
@@druidofthefang just the way it should be!
God bless Jay Leno for his wonderful contributions, making our lives far more enjoyable.
That is one of the most beautiful cars that Chrysler ever made. As a child I had an expensive 1/25th scale model of a 1958 Chrysler 300D that was almost exactly like the car that Per restored. Same color. Save interior. And so well detailed that I was in love with it. And I'm still in love with those cars. And it's the little styling details that made them so beautiful. Too bad that they rusted out. Such a shame. Great restoration Perl! Thank you for saving this car.
I love how much space there is inside. Imagine being a little kid sitting in the back seat.
Or...being a little kid and standing up on the floor behind the front seats and looking over the shoulders of mom and dad in the front seat. I fondly remember those days in my dad's 2 door 396 Pontiac Parisienne with powerglide...
@@elmoomle4565 Did that in Papa's stiletto finned 1962 Coupe de Ville,, and stood on the front seat when I was little. No kiddie seats back then..
@@MarinCipollina Nice memories.and a great ride! A time when we all lived, and survived with no seat belts, no child seats, no helmets for bicycles/roller skates/skateboards and spending all day playing outside in the neighborhood park climbing trees with no supervision... let alone playing with my prized Daisy BB gun, and all as a pre-teen. Ah, great times!!
Yes, thanks... interestingly, my Parents had a **1959 DODGE 9 Pass Wagon ( rear Face / Push- Button,V8,ps/P Brake:: massive room) fir a barely 12 years Old, then driving it for a short time with New Drivers License(* wondering about dating Girls in A wagon).......
I was that kid. Mom bought hers in 1972. I was in the backseat for the ride home. And yea, she still has it!
Thanks for continuing to entertain us, Jay!
Fuel Injected Respektos
@@Ninja_S1000RR-R 1958 Respektos back at you.
'57 Chrysler is one of the purest, simplest forms of beauty.
This is a 58, a better quality car than the 57.
That has to be the finest restoration I've ever seen. They didn't spend much time on the interior, alas, because the interior is immaculate. I hope Jay and Per will revisit this car in detail. A two hour documentary would be nice. This car is truly exceptional.
And I say again: there is room on Mt. Rushmore for Jay Leno. He is an American institution.
It was a show stopper when he brought it out to Coffee ‘n Cars Valencia.. really nice man, patient with everybody asking him “all kinds of questions”... I hope he brings it out again soon...
The original fuel injection was made by Bendix (another swede name) . It could have worked but it was beyond the understanding of most mechanics of the day.
So Bendix Corp. sold it to Bosch who sold it to VW for use on the type 3 and it became the Djet ,which still work fine today. It's real automotive stoneage stuff though,no oxy sensor and no diagnostic ports or codes,so it's as Per Described the Bendix system,no actual computer like today,just a switch box with transistors using the heat,air temp and manifold vacuum to measure fuel delivery against the throttle position switch ,which activates the injectors.
Even though the unit didn't work too well, let's not overlook the fact that in 1958 Chrysler was introducing electronic fuel injection and in-tank fuel pumps.
This was an OG Bendix unit.
I do like seeing people of foreign countries appreciating what American Classics we're and still are,,is a huge car,,but elegant
Thank you for fixing the sound, can finally watch these without headphones on.
Have never had much problem with the sound in any of Jay's videos... at least, not on my computer... phones or laptops may be different...
@@BuzzLOLOL Many, many videos when, I assume post editing, do not have the sound up to the levels they need to be. Someone editing may be wearing headphones and think sound levels are just fine. But, as you said, different systems have different outputs. I have noticed that many recordings of music seem to have the audio set right--likely because the people putting them up are highly aware of audio--but some videos with a lot of dialog are recorded way low. Your sound should be peaking right below the level of distortion when you do your edit, allowing the listener to set the audio to their level of comfort--but this is not always the case.
The Chrysler 300 series are some of the most beautiful cars in history. Jay's staff have amazing taste. The stuff that dreams are made of.
Per , you should be very proud. Tell Jay I said you need a raise !
Big and fast... sweeeeeeeet!!!
Jay said "...when he brought it home". That's pretty darn cool.
Once again, I learned something new! Love these vids.
What an absolutely magnificent piece of work.
This is by far my favorite episode of Jay Leno's Garage and I believe it will be for all time.
Beautiful car. Love the way it gets up and moves for it's sheer size. Very impressive. Great sound too! Jay was loving it! Nice restoration!
That is one of the most beautiful cars I have seen.
I love when it's just one of Jay's cars or one of his guy's cars, best type of episode!
WOW...I just love the look and personality of this car! Thanks!👍
hey Guys, that was just wonderful ! Prime example of : 'Perfect is Good Enough' . Well done Per and Jay....
When I was a kid my Dad had a '57 Chrysler Windsor, 4 door, pea green, w/ the most Beautiful gold & tan brocade upholstery. That car had the 270 or 290 and could flat get it....2 weeks vacation w/ 3 kids in the back seat, pulling the camper around the country.
Way better looking than the 61 model I just watched!!!