Next thing you know they drill through the rim to mount it cause they don't know what a knockoff is
7 років тому+13
After watching the work you do, I would NEVER bring my rims & tires to you, because, I would be worried to death of them getting scratched. You treat rims very brutally.
He has no idea how to work on these tyes of rims...you only do that crap if the spokes are leaking or your going to hop your ride till it hits the bumper...could not figure out his deal
you dont need the tube to mount these tires. run the air through the valve and wiggle the tire. it will seal its self. been doing it like that for years for my 13's. you could knock out 2 wheels in the time it takes you to almost do this one. my 2 cents
Imagine trying to hop with those inner tubes in those tires.😄😂⚠ Tubes aren't meant to go on stretched tires. They will need to be over inflated and boom time bomb.
Dude maybe you should have videotaped the fourth rim and tire that you mounted, maybe by then you would’ve had a little bit more practice, just saying and then post a video
I have a Dayton wire wheel and I think that the adapter maybe cross threaded and can't remove the spinner can anyone help me get it off without have to buy a new rim
5 років тому+1
@@jhart490 You're supposed to first apply grease on the threads of the adapter and center cap before screwing on the cap. Then you will never have problems installing or removing.
Havoc lol that's where u got your info one more wanna be talking hard in the comment section have even every owned a low low in 39 and had at least 5 custom lows all with candy paint hydros and all gold 88 spoke daytons what u know bout that bitch boy I'm from burque NM where u from coward
Havoc Chrome haha what's the matter you couldn't afford any gold anyways I got paper to make don't have time to sit here and fuck with chavalas like you lol
It’s been 8 years and the tire still isn’t mounted
lmao 😃 makes me what to be there to push him out the way, and show em how its done !
*Want😁😃👌🏿
your fired Tim !
Inner tube!!!....wat kinda witchcraft is this
🧙♂️Wheel Sorcery!😳😁😃
Ese jale es pa la RAZA 👍
Next thing you know they drill through the rim to mount it cause they don't know what a knockoff is
After watching the work you do, I would NEVER bring my rims & tires to you, because, I would be worried to death of them getting scratched. You treat rims very brutally.
What fuck is he doing
He has no idea how to work on these tyes of rims...you only do that crap if the spokes are leaking or your going to hop your ride till it hits the bumper...could not figure out his deal
Jeffery Guy 🤣
someone's a little to much excited opening the package Haha
Those are Awesome Rims! Where did You Buy Your Rims from? What was the price for a set of 4? Those are nice! Awesome! 👏🏼👏🏼👏🏼✌🏼😊👍🏼💯
omg The bead on that tire is done ! YOUR SUPPOSE TO MOUNT 13's BACKWARDS ,MEANING FLIP THE WIRE RIMS OVER ALONG WITH THE TIRE SMH
Man up and get some starter fluid! Tubes are for kids!
tubes are for guys who dont know how to mount wires
and you still didnt get it mounted
WEAK
How was the bead sealed on the hub to be able to just use a regular air line to set the beads?
you dont need the tube to mount these tires. run the air through the valve and wiggle the tire. it will seal its self. been doing it like that for years for my 13's. you could knock out 2 wheels in the time it takes you to almost do this one. my 2 cents
What's the inner tube for?
Wow! Those rims are Sweeeeet..
wHY USE A TUBE
Imagine trying to hop with those inner tubes in those tires.😄😂⚠ Tubes aren't meant to go on stretched tires. They will need to be over inflated and boom time bomb.
Vixi mano ! Que trabalho que dá apenas uma roda kkkkkkkk
Muito legal seu vídeo cara
what happened big pimpn I wanted to see the tire on them ds, them ds,
and now there's a part 2 I hope you redeem yourself over there.
It's been 9 yrs, is there part 2?🧐🤔😁
its a good idea... I just did a quick video on how I do it
That's wat id like to know.. wat a hard way to put tires on a wheel, I've seen way quicker ways..
You,ll be replacing intertubes every three weeks.smh
POS QUE CHINGADOS TRAE ESTE GUEY ???? ....... FUCKIN ' ROOKIE !!!!
Dude maybe you should have videotaped the fourth rim and tire that you mounted, maybe by then you would’ve had a little bit more practice, just saying and then post a video
omg , set em in the sun standin uup fo few hours , problem solved homes
No need for a inner tube there sealed wires

2 cheetahs is ten times easier good effort
Mo Kanic one can of starting fluid and a lighter. 20 tomes easy
92201fish i guess you haven't had one blow up in your face yet the lighter and starting fluid is good if your offroad and loose bead
Wtf dude added a inner tube 🤣
Almost 45 minutes for 4 tires, that's a 20 minute job for all 4....giving our name a bad rep..lol
Total fail !!!
Melbgemowner what tire's reference to stretch some 14 x 7 rims like you do on this video
I have a Dayton wire wheel and I think that the adapter maybe cross threaded and can't remove the spinner can anyone help me get it off without have to buy a new rim
@@jhart490 You're supposed to first apply grease on the threads of the adapter and center cap before screwing on the cap. Then you will never have problems installing or removing.
All u have to do is blast it with a air cheetah I mounted and aired all mine in 15 min vary easy
your lucky the cheetah didn't break the seal covering the spokes rookie mistake
How can I buy this wheels
Where’s the gas and the match??
really? wtf was that you didnt even get it on lol
Pobre Conpa cuando se mantiene desponchando llantas
How much sir?
Numbers please:) Rim and tire..
what car is this going on?
Me like a Mexican I am I buy starting fluid and make those tires blow easy this f guy takes for ever I bet the fucking tube never came out jajajaja
Hes australian cant you tell lol
Wtf is this.... Is he joking..
8 minutes is way to long to mount that i could do it in less then half the time lol
wtf is he doing
jram0001 Exactly lol
tire town south d town
Dayton don't make 100 spoke just 88s and 72
Havoc lol that's where u got your info one more wanna be talking hard in the comment section have even every owned a low low in 39 and had at least 5 custom lows all with candy paint hydros and all gold 88 spoke daytons what u know bout that bitch boy I'm from burque NM where u from coward
Havoc yeah b**** but what size are they and where you from
Havoc once again a rookie a pair means two do you mean a set of 4 what's a good where you from
Havoc Chrome haha what's the matter you couldn't afford any gold anyways I got paper to make don't have time to sit here and fuck with chavalas like you lol
86 STREET yeah they do fuckin idiot
Wow... 😂😂😂😂😂😂😂
🤦🏻♂️🤦🏻♂️🤦🏻♂️
Wtf
alk to muhammuaud lmaO
lol
Lmmfao
LMAO!!!!
Please delete this video, I’m sure you ran away customers with this hot mess of a video.
8
Guy ruined rims
this is dumb, he couldn't even mount the tire
LU JASSO
Foolishness