How To Make A Floating Bed - Time lapse
Вставка
- Опубліковано 24 гру 2018
- Hey guys today I will be showing you all how to create a FLOATING BED! There aren’t many good videos explains how this is made so here you guys go!
Hope you all enjoy!
P.S. If anyone needs measurements for their project I’d be happy to help, just send a message in the comments section below!
Materials and Costs:
2x4x96” Pinewood stud: 7 @ $2.25ea
2x10x12’ large wood board: 1 @ $12.21ea
1x6x12’ Common Board: 2 @ $8.65ea
Screws: Depends on your preference but I bought #8 drywall screws. I know they break easily but there aren’t any monkeys jumping on my bed. :)
RGB Lights: Monster illuminessence 16.4-ft. LED STRIP LIGHT MOOD LIGHT KIT (Bought in store at Walmart) @ $31.26 after taxes
www.walmart.com/ip/Monster-Ill...
-----------------------------------
King size bed frame:
2, 2x10**x144”
2 pieces cut into 68” and 2 into 45” (this is the big base the bottom part of the bed. Make this however high you want to). The 10” is what I used but it you want your bed to be higher use a bigger wood. Now, the pieces that are left can be used for creating more support pieces going horizontally.
10, 2x4x96”
2 cut down to 84” for sides and 8 more (or however many you think you may need to make the structure stronger) down to 84” for the pieces going horizontally.
Lastly, 2, 1x6x14’
Cut 2 pieces down to 84”
And one into 76” (cut a bit bigger just in case so you can sand it to perfect for later)
-----------------------------------
Queen size bed frame
10, 2x4x96”
2 cut down to 84” and 8 down to 68”
2, 2x10**x144”
2 pieces cut into 68” and 2 into 29” (this is the big base the bottom part of the bed. Make this however high you want to). The 10” is what I used but it you want your bed to be higher use a bigger wood.
Lastly, 2, 1x6x14’
Cut 2 pieces down to 84”
And one into 60” (cut a bit bigger just in case so you can sand it to perfect for later)
(In order to put supports, space the 8 2x4’s going across evenly and then stick another 2x4 vertically in between. At least 2 for good support)
-----------------------------------
Full size
These are the supplies you’ll need and the sizes for each.
2, 1”x6”x12’ common board
Cut demensions will be 2, 80.50” and one really close to 54” (ps, make sure this one is a bit longer so it’ll fit between the other two real snug)
8-10, 2”x4”x12’
Ok so here’s the thing, I have 7 support pieces going across for my bed, but this can vary on bed size and your personal requirement. If you think you’ll need more support, then put more. But these will be trimmed to exactly 62” for you. (Ps they aren’t actually 2” and are 1.5 but I’ve taken that into account and did the math for you already so don’t worry about that.)
1, 2”x10”x16’
You’ll need one 2”x10”x16’ (that’s a big board) btw the 10” is actually 9” and if you want your bed to be higher or lower, change that number. My bed lays at 13” high so you’ll have to play around with that. (9” for the big board + 3.5” for the 2x4 board is approx 12.5in.)
The cut demensions should be 2 boards that are 63” in length and the last piece cut it in half or measure the last piece and divide the total length by 2 and you should get somewhere around 33”. That’s a good size and should run you well.
(You’ll end up with 4 boards, 2 that will be 2”x10”x63” and 2 more that are around 2”x10”x33”.)
The spacing for the 7-8 cross pieces is all up to you and with that you’ll be able to add more support pieces in the middle.
Hope this makes a lot of things clear for you and if you have any questions or concerns, just let me know.
-----------------------------------
Twin size bed frame
8, 2x4x96”
2 cut down to 79” and 8 down to 46”
1, 2x10x144”
2 pieces cut into 63” and 2 into 24”
Lastly, 2, 1x6x144”
Cut 2 pieces down to 79”
And one into 38” - Навчання та стиль
CHECK OUT THE UPDATE VID!!!
T3m0ur why is this recommended but glad it was
Check out the new one!!!
T3m0ur I love this idea! great video :)
Check the new vid guys!
Yo if your looking for some good misic for you vids search up ninety9lives. NO IM NOT SELF PROMOTING. Its just free non copyright music👌
1950s They said there would be flying cars in the future. 2019: Floating beds. Close enough
😂😂
😂😂
I love how technically planes are like flying cars but we have to associate a car like vehicle that can fly to call it a flying car.
TheMarshian bro u gotta buy a ticket. Pack a bag. Go to the airport 3 hours before. With a flying car u just leave ur house hop in the whip and fly away. There’s a difference dude
Yeah, and before global warming there was global cooling that was the reason they wanted to raise taxes to save the world. The Govern ur mental took a page from the Bible, that imminent death was right around the corner and we need the Govern ur mental to save us.
Imagine being stoned and you see a bed like this
Straight up
Ong thinking the same shit
Ediel Cutthroat that's just happened to me hahaha
Dem bruh! 😂
*"w o a a a h d u u d e"*
I have seen so many DIY projects that involved building furniture, and this is one of my favorites. Well done Sir!
Moin (that's what we say in Germany when it's early in the morning) I'm grateful for this suggestion. I rebuilt the bed a bit bigger and even my dad as a skilled room man was impressed! I thank you.
😭😭AWESOME!!!!!!!
Nice idea.. im so done stubbing my toe almost every time i walk too close to my bed.
TYPICO BEATS now you’re going to stub your shins
Avve N might as well just ht my head or some
Look for my comment 👍🏽
h2thaog ph sorry bro didnt see it
Now u can smash ur shins instead
7:09 blade within reach to fight the night demons
Halsey85 I DIDN’T REALIZE UNTIL I’D ALREADY POSTED IT 😂
😂😂
I saw that lol straight dagger
🤣
Issa knife
I really like your floating bed! The lights under it was beautiful and did give the elusion of floating. Fabulous idea!!! 💙❤️❤️
Finally a bed made with regular tools. Thanks bro I’ve seen a lot of videos of floating beds but they are all made using all kinds of table saws and wood shops that use tools that I don’t own. This is simple and easy to follow.
Rumour has it; he’s still hearting everybody’s comments!
It's been said, that late at night, if you listen real hard...
You can still hear him hearting comments.
hulagan808 lol
wow really funny.........made my day
I didn’t forget ya!
Ha😂
Jumps at the side of the bed
*_rip_*
Nahhh
I just finished building this bed for my daughter today, turned out great, thanks!
I built this bed back in 2014 when I first saw it. I have a king size bed. My mattress likes to slide around on it.
2014????
why am I watching this when I can't even make a good decently circle
I like how the lights look better than the bed itself!!! Good job dou God bless 🙏🙏
95% percent of comments: *but what if you’re having rough sex?*
4% of the comments: *How it was recommended by UA-cam*
1% of the comments: *nice idea*
💀
Damn thats true
0.01% of comments: *Lets comment on comments*
Abhisan Ghimire that’s us right now💀😂
@@rubiocarlos4770 haha oh yes 👌
Before seen your comment I was seriously going to ask for that
Rumour has it he maybe still hearting comments
Actually
Very nice floating bed .....i have to share this with you .....i lived in Namibia during the time of independence ...1988-1994...and occupied a rather large apartment .Needless to say i had all the space to be creative in ...and .....!!! built myself a floating king size bed ..as in your vid. I must confess i had flourescent lighting ....i doubt it these colourful lights were available at that time ...Good work fellows .....i just patted myself for my innovation ...32 years ago .
This bed wouldn’t last a year in my room
U know cause u been fucking
Me 1min
Shut up u virgin
That bed is probably sturdier than anything you could buy. Not too sure about the size of the holes underneath the mattress though. That'll need adjusting to add more supports.
eddi trulok you probably lost your virginity last month and feel empowered calling other people virgins now
Nice to hide every single dirty sock lmao
Ben Fluksa O shid
Projects like this are the best to do, the satisfaction at the end is all worth it😂👌🏽
You should do a follow up on this bed. If their are any mistakes
Jeez, from hover boards to floating beds now!! Lol.. Nice job, looks cool!
7:02 dat knife... MURDER ON MY MIND
Noooooo
T3m0ur nice tutorial tho!🔥
WAKE UP IN THE MORNING I GOT BREAKFAST ON MY MIND
Nice knife bro.
A knife? That is a big f***ing sword dude
"everything needs to be cut" right off the bat you got me dying
😂😂😂
came out a lot cooler than i thought it would, great job man!
creatieve Nice man 👍
That’s not nice :(
reloadwrecks "none of my Businesses" i guess you are one of them
@@reloadwrecks he's Dutch, so it is autocorrection dumb fuck
@@reloadwrecks Factsss
reloadwrecks you are included in that waste :/
Looks dope 👌 but what if it tilts if both y'all are smashing one side? 👀😯
My same thought
Christiano Garcia im sure it won’t
Test it lol. Just weight the base down with bricks or sand bags.
He screwed it to the bottom base therefore it wound tilt 🤔😐
It may not tilt if he made the base wide enough to counter his weight but even so get a few screws and screw the front half of the beds base to a couple wall studs problem solved
Great idea. Most teens would love this! Thanks for sharing!
I love youtubers likes you, still liking comments after years. Respect
:) thanks dude! Means a lot! :))
Damn, I need this bed. My pinky toe has been banged enough
Haha seems like your pinky toe bangs more on your bed than you do 😂
Ok
@@bryanzaragoza326 oh dang
your shins now
The end result looks fantastic!
Thank you so much for including cuts for different sized beds. This is making my life a lot easier as i will be making this within a few weeks! Thanks and keep up the great work!
Thanks! Love to hear back with feedback!! Much appreciated and good luck!!
@@T3m0ur quick question... when you say common board, is that what the type of wood is called? im trying to look for it online from home depot and i cannot find it? what would you use instead of that?
www.homedepot.com/p/1-in-x-6-in-x-8-ft-Common-Board-914770/202074483
That’s the link to it!
Just make sure it’s the right size!
@@T3m0ur you are an amazing human being! thank you so much! keep safe!!
I've seen people who have the money get fiberglass made beds. The fiberglass is so thick and perfectly made its basically invisible to the untrained eye. Alot of people also use the lights with it to give an even stronger illusion. While your bed is awesome and a fun project, for two people it's not safe. unless you lag bolt it to some of the studs in the wall.
The bed is safe for two people, but the size of mine isn’t. A queen is perfect, my friend made a queen and him and his gf lived together and they never had problems, but I do get what you’re saying. You wouldn’t want a bed to fall down at night😂
@@T3m0ur
It would be even worse in the middle of relations HAHAHA would make for a fun ride though 😂😂😂😂😂
😂😂😂
@markofthejt motj Yo you should check out my newest update vid too!
Very underrated UA-cam channel keep up the good work 💯
thank you youtube, this is similar to all the other videos i have been watching recently and is therefore a very good recommendation.
Awesome!
This is awsome and the way the lights reflect from underneath everybody would love these be great for kids aswell
I just made mine I followed your measurements for the queen size frame it all came out perfectly all I gotta do is put the 1x6’s on and paint It i wish I could post up a pic but I’m telling you that’s shits fresh, thank you for the vid 💯
Awesome!!! Glad to hear back from ya!!
No idea why i’m here and why this got recommended to me but i do know now how to build a floating bed! 😃👍
Good video and good thumbnail 😎
This is one of those videos that you watch but you’re never gonna do 😂
Who else agrees? 🤷♂️
Nope I'm doing this when I move for the kids rooms. Best dad ever..... Till one of my 3 kids falls.
Self note..... Make sure the bed can't tip over.
@@jking8bp457 😂
It actually doesn’t tip over I promise you!
@@T3m0ur it does mate I done it aswell. had to fix it to the wall.
Im doing it
THE absolute only thing I would change is; Rounding off the edges/corners....!..Great Idea...that being said!.....And luv' the lights idea....!
I’m definitely making this in January 😀 I saw a version of the steel one but I’ve been searching for the wooden type
Impresionante! Saludos desde Argentina
Why do i have so much likes?
Well, we all clicked on it... Touche
Yep. Pretty much
Nobody:
UA-cam: Want to remember a great pirate real quick whilst watching a great video ( Ace
Scott Allen say nomore ;D
I actually searched how to make a bedframe and this came up and is kinda better lol just need mine raised up
Honestly mate, what a top notch job! All I could think after watching this was "Now that's how you make a bed!!" One day I may follow your example...
Thanks so much man! Your love is much appreciated!!
This is actually so cool, great job!
We all just gonna ignore that dagger under the bed near the end 😂
I was thinking the same thing ahahahah
That's cool dude really good job I like it that much that I could even do it myself .
I love this so much, I can't find any and I really hope I can make one myself, nice work
Thats what i call dedication he hearted all the comments
Including this one :)
2:30 lol, if you’re ever at store with somebody and see someone with their crack out and about, just ask the person you’re with if “they have a pipe” they’ll get it eventually😭😂
Make sure to like, comment what ya think, and consider SUBSCRIBING!!! I’m a small channel but very dedicated! You’ll see many more videos like this soon! I’ll also be doing giveaways on certain builds I do, but mainly in the Houston area! So if you’re lucky enough, who knows! Also, check the description for MEASUREMENTS!!!
Yup 😂
Hi I'm a new UA-camr too in the Dallas area. Send some viewers my way and I'll send some your way (:
#BadAss😎
#NewSubscriber💪🏼😎☑
Watching from #SanAntonio☑☑☑
Bro music name please
Invincible - NCS
Dude that’s an awesome build. Looks very futuristic! Way nicer design than others on UA-cam with way higher budgets.
Thanks dude! And yes!! That was the goal in mind! Inexpensive but built durable!! Simple but elegant! Who wouldn’t love it!!!
Thank you so much for your support!!
I just finished it took a week but i followed the instructions now it looks great 👍
You need to wear like work boots...not a flip flops....safety first...
This bed looks awsome what would make it perfect is padding on the wood
Awesome idea. Moving to a new state. My son is bummed, gonna do this for his room. This might cheer him up a bit
Good luck!!!
Super attractive to see a man that is creative and handy! It came out amazing🤙
😂 this dude clearly doesn't know what he's doing. I'd love to know how long it actually took him, in between checking his phone to read the instructions lmao.
I will say though, not bad for someone with new tools and next to no experience. With a few tweaks and some finish work, this could be a sweet product as opposed to the $40 IKEA project that it is.
Well first off everything needs to be cut
*Mind Blown*
nok Z come on self explanatory rhetorical
I'm planing on getting one of these!
I like this one ,nice job dude..
I totally love it. Good job! 👏🏾👏🏾👏🏾
You should stain the wood and add a headboard. I took inspiration from this though for sure. Building my own version.
Haha fog machine under the bed sounds like a good idea it would be cool to also have it turn on remotely to have it ready before bringing a girl in
Very cool lighting. Thanks for sharing.
Looks insane man 💯🔥
I think you should put some good speakers under the bed
I think it may be nice
I did! I actually put two google home mini’s on it!! One on each side connected to my sub and sound bar! Sounds awesome!
Thats awesome
you are amazing dude's,keep it up
Thanks bud!
This is amazing! Great job
Very cool. Nice job. The light's really set it off..
I JUST HAVE TO MAKE THIS BED THATS AWESOME!!
Thank you man this is amazing mad my own
So talented and impressive. Great video!
Awesome job. Looks great !!!!
One stroke session w/me th@ bed is no longer floating 🤷🏾♂️
Jesus christ bud wat are u putting ur dixk in a vice?
🤷♂️
Chicken I feel strange replying to someone referring to themselves as “chicken” but nonetheless...u don’t know me personally and w/th@ can’t confirm what I’m saying but trust me I’ve destroyed 4 beds w/3 different women and on 2 of those occasions I still kept going🤟🏾
^
Came out cool is that a bearded dragon 😍🦎
Yup!!! His name’s Hary!
Awsome bro planning on making one!
LOVE IT 🤩 thanks for the vid!!!
I dig the concept. I want to do something similar no ledge, maybe cinder blocks with a bed frame form to hold foam mat. Just not sure if the frame would slide off the blocks. I dig the lights.
Great work shoes buddy..lmao!!
Wow! I love it! This is really nice!
Dude that's really cool!
Nice job
Dude this was a really cool idea
Merle Swilley you know what! I made a similar thing for my FISH TANK!!!
Woah. That’s really cool
Stay tuned!
Nice but u will have to bolt down the bed to the floor cause on getting up from the corners I’m sure the bed flips or tilts
I was having the same thought
That’s awsome man great job
Forget what everyone else is saying. I think it's a great job. 👍
Thanks!
Damn while this guy is building floating beds I can’t even build my credit back up.
Instructions unclear, microwaved my bed
yu buggin out bitch
this is so cool! my dad and I might try this with my room
This is cool didnt use exact stuff but worked great
Me: Yea I’m going to do that today
Also me: Tomorrow
😂😂😂THATS ME WHEN MAKING A NEW UA-cam VID!!!
You should paint the part that was showing at the end, would’ve finished the project nicely!
like multi coloured to go with the lights
That looks awsome!! I want one.
Definitely going to try this next week!
Great Video. And your material list is on point. Except not sure what size bed you built. Full? Twin?
Theodore Burrell this was a twin!
Also maybe painted black or what ever darker color would make it pop more maybe
That's freaking awesome!
Not bad my man .🤘awesomeness achieved.
Amazing job man! I already have a Queen size bed, I want to convert that into a floating bed. Can you kindly tell me what the measurements should be? Thanks in advance!! - Moe
Mohammad Shahin Hey Moe, I appreciate the praise! And of course, just email me at temour100@yahoo.com and I’ll reply with the perfect measurements for your bed.
@@T3m0ur just sent!
Darcblock There’s actually no need for anti slip pads since I actually got 4 or 5 pieces of 2x4 and joined them with the top and bottom piece. I can stand on the corner and the bed would be A OK!
T3m0ur do you think you could send me the queen link too?
He’s hearted everyone’s comments from last week, but is he still doing it????
(IKR cheap attempt to feel loved for once)
Am I? Btw your comment was in my spam 😂
Looks really good