Excellent video. Had exactly the same problem where the motor literally broke off from the housing. Now gonna try and fix. You make it look so easy. Really appreciate the time you took to make this vid
Helpful video!!! Had a problem with a damaged motor, too. With this video it took me 15 minutes to repair. I really like that on my tello, there is no hint on the damage. - The cable fit perfectly in the arrows again. And I learned someting about soldering. Thank you so much!
@@davechristmas1183 and you snapped which piece? Be specific so I can help! Like the whole arm? Just propeller? Prop guard? Actual motor and wires are out? Glad I saw this I wanna help
Sweet, had a crash up in a tree, had to pull it down with a rope. Damaged the motor, replaced in about 30 min with minimum problems. Quick easy repair, thanks! Everything is running perfect now, with 3 motors for spares!
Thank God I watched your video!!!! I broke the M3 motor, the same one as yours, and I was already down when I saw that double soldered black wire, the one for the aerial, you broke by mistake. I was not looking foward to do that connection, since I am not a master with the soldering iron. I saw a couple of people with different solutions, but most of them involed unsoldering the wires at the board. Not what I feel confortable doing. you had the best solution, thank God you warned us about the right wires!! when my motors come, I'll let you know how it goes!
👍 Thank you for this information 👍. Such a great little drone Tello. Some guy said he got about 2 years out of his motors before a fail. Using regularly daily...
Hello! I ordered the motors you put in the video description and the they dont spin but when i put the battery in and spin the motor with my hand, the motor starts spinning Edit: i just looked at the amazon motor and on the page it says it has 8 volts
I have just double checked and the motors are 3.7 volt Item name: DJI Tello Motors 8520 Coreless CW CCW Voltage: DC 3.7V Shaft end play: 0.05-0.3mm No-load speed: 52000±10%RPM No-load current: 93mA (MAX) Load speed: 24200±6%RPM Load current: 2200mA (MAX) Starting voltage: 0.8V DC (MAX) There are loads similar on amazon and some on eBay Sorry if the link was incorrect I have put a new one which should work Thanks for the great comments👍🏻👍🏻🛠
Great tip regarding the aerial wires! I did notice on my Tello there seemed to be 2 sets of wires on the back legs and only one set on the front, so I kind of assumed they were antenna wires! My bebop has a similar setup on the back legs, you can see the flat antenna plates forming the back feet and the extra wires run along the back legs, most quadcopters have a similar setup, although on my hubsan the antenna wires are inside the rear legs! 😎
thanks Anton amazing video... just what I needed. my power on button doesn't press thus doesn't boot the drone. I dissembled it but couldn't know what is missing on thr button
Very good. One question: Is it possible to connect the Tello camera to a sheet video transmitter? Intention: To do FPV with an OTG receiver. Thankful. I've seen the connection of a camera and an external transmitter, never the camera of the Tello to an external transmitter. It's possible?
It’s a lot of trouble to go to, I watched a great video on UA-cam of a guy fitting a vee-bee board into a tello, it was awesome fpv really fast worth a watch 👍🏻👍🏻Thanks for watching
Good job lad before you tin those wires you can twist them inline kind of like a macro mesh and solder then they will lay straight as apposed to a bread tie kinda solder ....cheers i appreciate
@@aaanton11 yes but i think if you take old smarthphone cam with optical stabilization , some old lumia or nokia for example - do you need phone CPU and soft or only camera module give you better quality... Not have Tello and im not good in electric but its interesting
Mine is only a year old and rarely flown although the same motor stopped spinning mid flight. I suspect a hair got in there. Have ordered new motors but going to experiment to see if I can clean the old one out before they arrive.
My motor came off different. I don´t see the white plastic bit. I put it back in... sometimes it starts for a second and then stops. Any other option / idea to repair my case? Or I also have to change the entire motor?
Great video and hilarious commentary. Would there be a way to increase the aerial antenna for better connectivity? Increase the aerial antenna and add a WiFi Repeater would make this Tello great for long indoor flights! Please let me know what you think! Thank you.
bo bo, the winding inside the base of the motor housings is what gives it the tune. If you could get another aerial set up from either dji or another aftermarket company then you could run 2 of them in parallel to the front motor housings underneath the front motors. You would have to be careful not to add to much length of wire though, as it could change the aerial’s tune. Theoretically it could give you about double the aerial signal strength, but it just might help with the connection while flying back toward you, because I’ve seen that in other videos that they don’t connect as well from the front.
@@DavidReynolds-kr6yh thought that maybe a possibility but asked a similar question on tellopilots.com/threads/tello-antenna-modification.2214/#post-15610 App dual smart WiFi connection. Don't quite understand it but when I looked at other DJI products there are many hacks for replacing WiFi receivers but none so far for tello
Hey great tutorial and great crafting, i was just looking at a couple of other videos and the fix was kinda lousy. That being said, i have a couple of questions: 1.- Im still not clear on how to diferentiate CCW from CW, i will go by the colors hope that helps me, but any other clue regarding that? 2.- How often do you think you will need to replace motors? i saw another solution adding connectors to the wires so if you bust it again is easier to fix. but is that needed in regular life span? disregarding the looks, but with a good craftmanship i think looking could be passable. i busted mi left front motor taking a picture under an umbrela, it hit one of the arms, 2 propelers losts and the motor fell of. my spare parts are arriving on friday. Once more thanks for the effort
Hi thank you for the great comments, the only way to distinguish between CW and CCW is the colours of the wires. it is all to do with the direction that the brushes face inside the motor they will work in both directions but the wrong way round it will wear out quicker.I don’t think you will wear a motor out it is more likely to break through impact, they are supposed to last about 1000 hours. I wasn’t keen on the connector plugs on the outside of the Tello is body and much prefer to keep everything under the cover but it is personal preference, for how easy it is to take it apart hiding the wires it’s not a problem. Thanks again for your Comments 👍🏻👍🏻🚁
Sorry about the late response, well done for the repair, still trying to get all the local guys together for a big race, but it’s hard, every one is on different shifts, and they all want to take part, it might be a summer venture, crack the barbecue up and make a evening of it👍🏻👍🏻
Great video!... I need to replace one of mine... The one thing I am unsure about is how to know which motor is CW or CCW?... Is it as simple as matching up the wire colors of the Tello to the wires of the replacement motor?
Please tell me how to clean my tello motor, actually a drop of feviqwik dropped in a motor(propeller was removed that time) . Now this motor is not working means whenever I put a propeller the propeller does not move... Please tell me how to clean that motor without replacing.
The motors are directional, although they do work both ways, so it is not critical about the wire colours but match them if you can. Thanks for the great comments 👍🏻👍🏻
Cheers dude. I have just ordered one. And yes. Heat shrink tubes and join back into the arm groove. , there is a company called micro motor warehouse they do some insane motors. And mini brushed motors , do you still have the Tello ? I have a few various drones. And found the video helpful. It’s good to know. Cheers mate stay safe 😷
No, they work on a completely different system, but you can upgrade to a more powerful motor, but the battery life suffers 👍🏻👍🏻🚁👍🏻Thanks for the great comments
hey thx for the Video , i just want to start now. i ve bought China motors too. do u think it is enough to Change only the broken one, or is it necessary to Change all?
@aantaon11 I accidentally pulled the aerial wire too thinking it was the motor wire. I watched your video after I pulled it. LOL Did you do anything to fix it?
You could probably use a dry lube, but don’t use any oils as they will eventually dry up from the heat and then might gunk up the motor which could burn it oit.
This was actually very informative. I busted mine by SLIGHTLY touching a wall... It doesn't spin now. My question is, can you confirm the diameter of the motors? Some sites say 7mm and others 8.5 (like in the link you posted) but can you measure them? :'(
Thanks for the video, if I ever do break a motor on my tello I now have confidence in doing that repair, and not accidentally break the antenna wire. The only thing I would do differently would be to use heat shrink on the wire to keep it neater.
It's a pity I would buy the drone but when I seen there is no proper way to repair the motors and no official replacement parts from ryze I went for a eachine e58
@@aaanton11 I've flown the eachine e58 for a while it's very unstable very plasticy and just feels too much like a toy I'm definitely going to buy a tello now and this video will come in handy
Этот капиталистический имбецил таже антенный кабель не может отличить от простого провода, куда лезет. А ещё эти дистрофики от туда же, так хвалят в коментариях за его гениальные труды
You're crazy man, you cut the wifi antenna at 09:00 min of the video ... it was not necessary, because you just wanted to change the motor ... there is no more repair. Oh my God...
Ha ! thanks for the great comments, as you can see I was gutted when I realised my mistake, and hopefully stop someone else making the same mistake, all working in the end 👍🏻👍🏻😂
No, they work on a completely different system, but you can upgrade to a more powerful motor, but the battery life suffers 👍🏻👍🏻🚁👍🏻Thanks for the great comments
Excellent video. I followed every step. Well almost every step. I didn't cut the wifi antenna. It was a success. Tello flies again.
Magic, Thanks for the great comments👍🏻👍🏻🛠
Please can you fix my tello motor @@aaanton11
Excellent video. Had exactly the same problem where the motor literally broke off from the housing. Now gonna try and fix. You make it look so easy. Really appreciate the time you took to make this vid
It’s a great little repair and you feel great when they fly again 🚁 thanks for the great comments 👍🏻👍🏻
Helpful video!!! Had a problem with a damaged motor, too. With this video it took me 15 minutes to repair. I really like that on my tello, there is no hint on the damage. - The cable fit perfectly in the arrows again. And I learned someting about soldering. Thank you so much!
Well done, thanks for the great comments 👍🏻👍🏻
Thanks for all of us who truly truly needed this and not just a fake smile at a viral video
Thanks for the great comments👍🏻👍🏻🛠
Hey mate I wondered I've just snapped the motor on 1 wing of my tello if I buy the motors are you able to fix it for me if I send you it
@@davechristmas1183 hey man!! I know you can do it!!!
I can even walk u thru it on zoom or something!
@@davechristmas1183 and you snapped which piece? Be specific so I can help! Like the whole arm? Just propeller? Prop guard? Actual motor and wires are out?
Glad I saw this I wanna help
Sweet, had a crash up in a tree, had to pull it down with a rope. Damaged the motor, replaced in about 30 min with minimum problems. Quick easy repair, thanks! Everything is running perfect now, with 3 motors for spares!
great stuff, Thanks for the great comments👍🏻👍🏻🛠
Thank you for posting this video. I got my son’s drone back up and flying in the amount of time it took to watch the vid. Thank you, sir.
Great stuff, thanks for the great comments 👍🏻👍🏻
just bought a tello and this video is really helpful ,thanksman
Thanks for the great comments 👍🏻👍🏻🛠
I bought a drone Tello.
Very satisfied.
Thanks for the review.
They are a great drone enjoy 👍🏻👍🏻
Thank God I watched your video!!!! I broke the M3 motor, the same one as yours, and I was already down when I saw that double soldered black wire, the one for the aerial, you broke by mistake. I was not looking foward to do that connection, since I am not a master with the soldering iron. I saw a couple of people with different solutions, but most of them involed unsoldering the wires at the board. Not what I feel confortable doing. you had the best solution, thank God you warned us about the right wires!! when my motors come, I'll let you know how it goes!
great stuff would love to know how you get on, Thanks for the great comments👍🏻👍🏻🛠
Excellent video!! My repair worked smoothly and our little Javis is back in the air. Thank you very much!
Jarvis lives on, thanks for the great comments 👍🏻👍🏻🛠
Thanks so mutch , your way worked so well looks just like new . Thanks Kevin
Great stuff, the bird is flying again 👍🏻👍🏻Thanks for the great comments 👍🏻👍🏻
That was delightful, like sitting there with you. Thank you.
Thanks for the great comments 👍🏻👍🏻
Thanks, this was a great help. I wish the link for the motor was still active!
Updated link is amzn.to/3ApofjD Thanks for the great comments👍🏻👍🏻🛠
👍 Thank you for this information 👍. Such a great little drone Tello. Some guy said he got about 2 years out of his motors before a fail. Using regularly daily...
Thats a good life then, and they are not too difficult to replace, Thanks Jamie for the great comments👍🏻👍🏻🛠
Brilliant video sir. I will be doing my one tomorrow. The new motor is in but needs soldering.👍
Well done, thanks for the great comments 🛠👍🏻👍🏻
Nice video! Thanks for taking the time to share that tech.
Thanks for the great comments 👍🏻👍🏻
Thank you. Your video helped me solve my problem.
💪
Glad it helped Thanks for the great comments👍🏻👍🏻🛠
Good fix, enjoyed it when you cut the antenna!
I can’t watch it, it’s too painful 😖, all ended well 👍🏻👍🏻😁Thanks for the comments
Andrew, why would you enjoy when he cut the aerial, unless you meant that he warned people about it.
Same thing happened with my tello , it fell from fifth floor, will try to repair now 😓
Good video , thanks for sharing.
Thanks for the great comments 👍🏻👍🏻🛠
Cheers from the usa mate!
Thanks for the great comments 👍🏻👍🏻🛠
Hello! I ordered the motors you put in the video description and the they dont spin but when i put the battery in and spin the motor with my hand, the motor starts spinning
Edit: i just looked at the amazon motor and on the page it says it has 8 volts
I have just double checked and the motors are 3.7 volt
Item name: DJI Tello Motors 8520 Coreless CW CCW
Voltage: DC 3.7V
Shaft end play: 0.05-0.3mm
No-load speed: 52000±10%RPM
No-load current: 93mA (MAX)
Load speed: 24200±6%RPM
Load current: 2200mA (MAX)
Starting voltage: 0.8V DC (MAX)
There are loads similar on amazon and some on eBay Sorry if the link was incorrect I have put a new one which should work Thanks for the great comments👍🏻👍🏻🛠
Great tip regarding the aerial wires! I did notice on my Tello there seemed to be 2 sets of wires on the back legs and only one set on the front, so I kind of assumed they were antenna wires! My bebop has a similar setup on the back legs, you can see the flat antenna plates forming the back feet and the extra wires run along the back legs, most quadcopters have a similar setup, although on my hubsan the antenna wires are inside the rear legs! 😎
Thanks for the great information 👍🏻👍🏻
Very useful thank you!
Thanks for the great comments👍🏻👍🏻🛠
Minute 20:00 priceless emotion!
Thanks for the great comments👍🏻👍🏻🛠
thanks Anton amazing video... just what I needed. my power on button doesn't press thus doesn't boot the drone. I dissembled it but couldn't know what is missing on thr button
Glad it helped, Thanks for the great comments👍🏻👍🏻🛠
how did you put back the aerial wire that you wrongly pulled-out?
Joined it back together, thanks for the great comments 👍🏻👍🏻
Very good. One question: Is it possible to connect the Tello camera to a sheet video transmitter? Intention: To do FPV with an OTG receiver. Thankful. I've seen the connection of a camera and an external transmitter, never the camera of the Tello to an external transmitter. It's possible?
It’s a lot of trouble to go to, I watched a great video on UA-cam of a guy fitting a vee-bee board into a tello, it was awesome fpv really fast worth a watch 👍🏻👍🏻Thanks for watching
Good job lad before you tin those wires you can twist them inline kind of like a macro mesh and solder then they will lay straight as apposed to a bread tie kinda solder ....cheers i appreciate
Thanks for the great information👍🏻👍🏻🛠
@aaanton11 While your Tello was apart did you see if the camera could be updated to a 1080 camera?
The transmitter wont cope with the extra Information, Thanks for the great comments👍🏻👍🏻🛠
@@aaanton11 I didn't think about that aspect.
How did you replace the aerial wires? I just did the same thing.
strip them back and solder, Thanks for the great comments👍🏻👍🏻🛠
Is possible to change camera module for example with smarthphone cam?
it would not be a easy job, but anything is possible Thanks for the great comments👍🏻👍🏻🛠
@@aaanton11 yes but i think if you take old smarthphone cam with optical stabilization , some old lumia or nokia for example - do you need phone CPU and soft or only camera module give you better quality... Not have Tello and im not good in electric but its interesting
Mine is only a year old and rarely flown although the same motor stopped spinning mid flight. I suspect a hair got in there. Have ordered new motors but going to experiment to see if I can clean the old one out before they arrive.
Sorry, meant to say, excellent video. Thanks for sharing all of it including the mistake.
Thanks for the great comments👍🏻👍🏻🛠
Hi and great job you have helped alot how ever i bought mine from some one who has cut the areil wire can you help me out with repairing it ?
Just join the inner and outer wires back together, Thanks for the great comments👍🏻👍🏻🛠
Great video, also have to replace a right rear motor that gave up the ghost.
At least they are replaceable and cheap to buy, let me know how you get on👍🏻👍🏻🚀
aaanton11 Thanks, i will.
Super poradnik
Thanks for the great comments👍🏻👍🏻🛠
Thank you very much. You explained in great detail 👍
Thanks for the great comments 👍🏻👍🏻🛠
How to differentiate the CW and ACW motors?? Or shall we just install in any direction?? A bit confused
Just match the wire colours, Thanks for the great comments👍🏻👍🏻🛠
@@aaanton11 thank you for your suggestion! ✌️👍
Will 65mm propellers be compatible with this dji tello drone??
Not sure give them a try, Thanks for the great comments👍🏻👍🏻🛠
@@aaanton11 ok and welcome
is there a way to open the actual motor, mine wires snapped at its base, i'd like to solder them back on
I failed to strip down the motor, Thanks for the great comments👍🏻👍🏻🛠
@@aaanton11 Hey, I opened it, but don't try this, impossible to put back properly
My motor came off different. I don´t see the white plastic bit. I put it back in... sometimes it starts for a second and then stops. Any other option / idea to repair my case? Or I also have to change the entire motor?
Not sure of the issue, Thanks for the great comments👍🏻👍🏻🛠
Great video and hilarious commentary. Would there be a way to increase the aerial antenna for better connectivity? Increase the aerial antenna and add a WiFi Repeater would make this Tello great for long indoor flights! Please let me know what you think! Thank you.
The WiFi extender works well, there is no better aerial as they are tuned, thanks for the great comments 👍🏻👍🏻
Would splitting the wires and adding other aerials of the same make add any distance I wonder? How are they tuned? There has to be a way ;)
bo bo, the winding inside the base of the motor housings is what gives it the tune. If you could get another aerial set up from either dji or another aftermarket company then you could run 2 of them in parallel to the front motor housings underneath the front motors. You would have to be careful not to add to much length of wire though, as it could change the aerial’s tune. Theoretically it could give you about double the aerial signal strength, but it just might help with the connection while flying back toward you, because I’ve seen that in other videos that they don’t connect as well from the front.
@@DavidReynolds-kr6yh thought that maybe a possibility but asked a similar question on tellopilots.com/threads/tello-antenna-modification.2214/#post-15610
App dual smart WiFi connection. Don't quite understand it but when I looked at other DJI products there are many hacks for replacing WiFi receivers but none so far for tello
Just found this pic. Showing the wires, app just coaxial cables...
Maybe you can try change cam for Sony IMX214 Camera Module 13mp
maybe, Thanks for the great comments👍🏻👍🏻🛠
Do you recall which RPM those motors were rated at? I live in the United States and found some on Amazon but there's a variation in RPMs. Thanks
49000 rpm but it wont matter too much as the speed controller will compensate, Thanks for the great comments👍🏻👍🏻🛠
hey, I have ordered dji tello motor and the motor shafts were taller then the original, does it do anything to aeronautical stability of the quad?
Try it and see I think it will be ok, Thanks for the great comments👍🏻👍🏻🛠
Where didi you put that little rubber?
Back where it came from, 😂 Thanks for the great comments👍🏻👍🏻🛠
That little blakck rubber i cant find the place for it
Hey great tutorial and great crafting, i was just looking at a couple of other videos and the fix was kinda lousy. That being said, i have a couple of questions:
1.- Im still not clear on how to diferentiate CCW from CW, i will go by the colors hope that helps me, but any other clue regarding that?
2.- How often do you think you will need to replace motors? i saw another solution adding connectors to the wires so if you bust it again is easier to fix. but is that needed in regular life span? disregarding the looks, but with a good craftmanship i think looking could be passable.
i busted mi left front motor taking a picture under an umbrela, it hit one of the arms, 2 propelers losts and the motor fell of. my spare parts are arriving on friday.
Once more thanks for the effort
Hi thank you for the great comments, the only way to distinguish between CW and CCW is the colours of the wires. it is all to do with the direction that the brushes face inside the motor they will work in both directions but the wrong way round it will wear out quicker.I don’t think you will wear a motor out it is more likely to break through impact, they are supposed to last about 1000 hours. I wasn’t keen on the connector plugs on the outside of the Tello is body and much prefer to keep everything under the cover but it is personal preference, for how easy it is to take it apart hiding the wires it’s not a problem. Thanks again for your Comments 👍🏻👍🏻🚁
Hi just to report that my Tello is alive! once again thanks... what about the tello race? still happening?
Sorry about the late response, well done for the repair, still trying to get all the local guys together for a big race, but it’s hard, every one is on different shifts, and they all want to take part, it might be a summer venture, crack the barbecue up and make a evening of it👍🏻👍🏻
do you know the model of original camera for him? or where buy this?
Not sure, Thanks for the great comments👍🏻👍🏻🛠
What could be the problem when after repair, the motor turns but the dron doesnt rise?
Have you put the wrong motors in, they are directional, is the air blowing upwards from the blades? Thanks for the great comments👍🏻👍🏻🛠
I cut the wrong wire what do I do
Solder it back together👍🏻 Thanks for the great comments👍🏻👍🏻🛠
Great video!! How did you fix the WiFi antenna wire?
separated the wire & joined it back together, Thanks for the great comments👍🏻👍🏻🛠
Great video!... I need to replace one of mine... The one thing I am unsure about is how to know which motor is CW or CCW?... Is it as simple as matching up the wire colors of the Tello to the wires of the replacement motor?
You’ve got it, they are all colour coded you can’t go wrong, they will work in reverse but the life span is reduced 👍🏻👍🏻
Please tell me how to clean my tello motor, actually a drop of feviqwik dropped in a motor(propeller was removed that time) . Now this motor is not working means whenever I put a propeller the propeller does not move... Please tell me how to clean that motor without replacing.
you can try this amzn.to/3jtcYnm superglue remover, Thanks for the great comments👍🏻👍🏻🛠
Is it necessary that the wire of the motor should be same like earlier
The motors are directional, although they do work both ways, so it is not critical about the wire colours but match them if you can. Thanks for the great comments 👍🏻👍🏻
Does work on Iron man edition one
great, I would love the iron man edition, they look fantastic, Thanks for the great comments👍🏻👍🏻🛠
thanks so much sir
Thanks for the great comments 👍🏻👍🏻🛠
Can i use a 8 mm × 20mm motor? Instead
all the motors need to be the same size, Thanks for the great comments👍🏻👍🏻🛠
Camera replacement pls thank you
will look into it. Thanks for the great comments👍🏻👍🏻🛠
@@aaanton11 if you have extra drone can you give it to me if you have😅
@@aaanton11 i always barrow on my cousin and almost broke it😢😅
Cheers dude. I have just ordered one. And yes. Heat shrink tubes and join back into the arm groove. , there is a company called micro motor warehouse they do some insane motors. And mini brushed motors , do you still have the Tello ?
I have a few various drones. And found the video helpful. It’s good to know. Cheers mate stay safe 😷
yes Steve we have 3 tellos and some more videos coming soon, Thanks for the great comments👍🏻👍🏻🛠
I accidentally cuted the antenna wire because I skipped a part of video, i soldered it back and the wifi don't work well, what should I do ?
Don't go to far from the drone😂 Thanks for the great comments👍🏻👍🏻🛠
@@aaanton11 but drone is 5 meters in front of me, and when it go more than 5 meters hight he just say low signal
Brand new mine takes off straight up do you think changing just 1 motor made them match?
The brain 🧠 in the tello does all the calibration so they work just fine 🛠thanks for the great comments 👍🏻👍🏻
Hello . I want to know the motor of another drone can work with the tello. Beacause i don't find the motor of tello in my country.
You can buy from China on eBay the link is in the description, thanks for watching 👍🏻👍🏻
Is it possible to replace with brushless motors?
No, they work on a completely different system, but you can upgrade to a more powerful motor, but the battery life suffers 👍🏻👍🏻🚁👍🏻Thanks for the great comments
hey thx for the Video , i just want to start now. i ve bought China motors too. do u think it is enough to Change only the broken one, or is it necessary to Change all?
Just the broken one, don’t change the good ones, thanks for the great comments 👍🏻👍🏻🛠
dose the warenty cover this?
Warranty won’t cover accident damage, “if you bend it, you mend it” Thanks for watching 👍🏻👍🏻
aaanton11 oh thanks!
cool man yep
Thanks for the great comments👍🏻👍🏻🛠
@aantaon11 I accidentally pulled the aerial wire too thinking it was the motor wire. I watched your video after I pulled it. LOL
Did you do anything to fix it?
Joined it back together, Thanks for the great comments👍🏻👍🏻🛠
@@aaanton11 Did you do that by cutting out the impact absorbers (rubber pieces)? How did you join it?
What motor lube would you recommend for tello
Not a clue, I didn’t know you could or should lube the motors, it is something I will look into and follow up, thanks for the comments 👍🏻👍🏻
You could probably use a dry lube, but don’t use any oils as they will eventually dry up from the heat and then might gunk up the motor which could burn it oit.
9:08 - LOL! If only I had saved a penny for every one of those moments in my gadget repair adventures, I'd be very rich by now!
Live and learn lol, it’s always fun to give it a bash👍🏻👍🏻Thanks for the comments 👍🏻
Any chance of a link to the Ebay site where you bought them. All the ones i see are £16 for the motors.
Ok I see there a link lower down, FAB.
The link is in the description, you will be flying soon good luck, thanks for watching 👍🏻👍🏻
This was actually very informative. I busted mine by SLIGHTLY touching a wall... It doesn't spin now. My question is, can you confirm the diameter of the motors? Some sites say 7mm and others 8.5 (like in the link you posted) but can you measure them? :'(
8.5 100% thanks for the great comments 👍🏻👍🏻
@@aaanton11 Thanks a lot!
Tape definitely added some weight
Heat shrink would have been better👍🏻thanks for the great comments 👍🏻🛠
Definitely, great soldering job by the way!
I saw 2 black wire and 1 white wire, But i saw you solder 1 black wire and 1 white wire, how about the other black wire?
Like I say in the video, don’t cut the aerial wire, then you won’t need to repair it 👍🏻😂😂Thanks for the great comments 👍🏻👍🏻
Where Link Buy motor?
The link is eBay rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F202263822557 Thanks for watching 👍🏻👍🏻
aaanton11 Thankyou
Same thing happened to me, but the front right motor came off
Time for a new motor swap, Thanks for the great comments👍🏻👍🏻🛠
Thanks for the video, if I ever do break a motor on my tello I now have confidence in doing that repair, and not accidentally break the antenna wire. The only thing I would do differently would be to use heat shrink on the wire to keep it neater.
Yes the tape was a bit messy, but it was all good in the end thanks for the great comments 👍🏻👍🏻
It's a pity I would buy the drone but when I seen there is no proper way to repair the motors and no official replacement parts from ryze I went for a eachine e58
It all comes from China 🇨🇳 official Parts or eBay, nice easy job in the end, hope you enjoy your e58 happy flying, thanks for the great comments 👍🏻👍🏻🛠
@@aaanton11 np I subscribed nice video
@@aaanton11 I've flown the eachine e58 for a while it's very unstable very plasticy and just feels too much like a toy I'm definitely going to buy a tello now and this video will come in handy
Same problem 😢😢😢
Thanks for the great comments👍🏻👍🏻🛠
to the wire no tape, use shrink tube much better
Thanks for the great information👍🏻👍🏻🛠
i lost 7 i meen 2107 vaz hm why because becUse
Thanks for the great comments👍🏻👍🏻🛠
Put the prop protectors on inside- worth it… $$ literally
Thanks for the great comments👍🏻👍🏻🛠
ok
Thanks for the great comments👍🏻👍🏻🛠
im tryna take my motor out
good luck, Thanks for the great comments👍🏻👍🏻🛠
His hand is vibrating lol
Not a steady hand to be found, Thanks for the great comments👍🏻👍🏻🛠
Чего-то умным видом накулемал, жаль что не тряпочной изолентой обмотал....
Про термоусадку мужик не слышал?
Thanks for watching 👍🏻👍🏻
Этот капиталистический имбецил таже антенный кабель не может отличить от простого провода, куда лезет. А ещё эти дистрофики от туда же, так хвалят в коментариях за его гениальные труды
You're crazy man, you cut the wifi antenna at 09:00 min of the video ... it was not necessary, because you just wanted to change the motor ... there is no more repair. Oh my God...
Ha ! thanks for the great comments, as you can see I was gutted when I realised my mistake, and hopefully stop someone else making the same mistake, all working in the end 👍🏻👍🏻😂
That’s why he stopped the original video to warn others about the possibility of doing that by accident, didn’t you even realise.
20210410
Thanks for the great comments👍🏻👍🏻🛠
.....
Thanks for the great comments👍🏻👍🏻🛠
Lol, don’t take up a job of bomb disposal…
😂 No chance!! Thanks for the great comments👍🏻👍🏻🛠
can you replace with brushless motors?
No, they work on a completely different system, but you can upgrade to a more powerful motor, but the battery life suffers 👍🏻👍🏻🚁👍🏻Thanks for the great comments