Welding Cart Build - Part 1
Вставка
- Опубліковано 27 сер 2024
- Today I'm building a welding cart! Finally, the wait is over, and there's one of these videos on UA-cam!
Tools used in this video:
*This site contains affiliate links for which I may be compensated
Millermatic 211 MIG Welder (Amazon*): amzn.to/3sMkkKh
Miller Digital Performance Welding Helmet (Amazon*): amzn.to/3aIU7TQ
Miller Welding Jacket (Amazon*): amzn.to/341Ph2G
MIG Gun Holder (Amazon*): amzn.to/3JxwzjS
Silver Streak Metal Marking Pencil (Amazon*): amzn.to/3zdeMK6
Rhino Cart Welding Fixture Table (Amazon*): amzn.to/3za8aez
Evolution 15 Inch Cold Cut Saw (Amazon*): amzn.to/3qAiYRM
Dewalt Bifocal Safety Glasses (Amazon*): amzn.to/35eCYhl
Milwaukee Brushless Right Angle Die Grinder (Amazon*): amzn.to/3j8pqeh
3M 2" Roloc Disc Adapter (Amazon*): amzn.to/3E39hyX
ABN Roloc 2" Flap Discs 40 Grit (Amazon*): amzn.to/3Hq14Gv
Milwaukee 2880-20 Cordless Angle Grinder (Amazon*): amzn.to/3JxWU19
Shars Ultra Precision 1-2-3 Blocks (pair) (eBay*): ebay.to/2RxwqWc
Starrett Intenss Pro-Die Band Saw Blade (Amazon*): amzn.to/3cIVAKM
Knipex Pliers Wrench 3-Piece Set (Amazon*): amzn.to/2ruzS8m
Raw Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 3.0 License
creativecommons...
I love how YOU put on your hearing protection, and the chop saw gets quieter for the viewers too. Little touches like that are the professional touch to your video editing.
Thanks!
For mounting the casters to the frame, I’d weld 3/8” steel plate the same size as the casters and drill-tap the holes.
You’ve inspired me to make my own welding cart video.
If you get serious about cutting steel you need one of these : Horizontal/Vertical Metal Cutting Band Saw, from harborfreight, great time saver , the one I have is there small one but it's a real keeper , love the thing.
Maker battle: Table saw sleds vs welding carts. Go!
table saw sleds are all the same though ...
ill be hiding behind my welding cart
Welld done, James
This is the first time I've noticed Old Glory in the background. Thank you for hanging out properly as opposed to just rotating it clockwise 90°.
Not a welding cart, but when I worked at a museum, I built us a tool cart for mobile repairs in the gallery. I mounted a toolbox on a rolling cart, modified the lock mechanism, added a work surface, with additional storage beneath it, and added battery powered LED lighting to make the tools more visible in dark corners. Our productivity went up massively with everything nicely in one place.
Looks like a great build!
You're doing pretty good if you post a video and someone that sees it 9 minutes after posting can't even say "first"
Sorry Quinn didn't see your add on until James was done pt 1 of the welding cart, very nice addition.
Lol, that conversation about how to attach casters is something I do, every time.
Perfect timing, I need to build a cart for my new welder.
lolol great opening line, i laughed out loud
Phew thumbs up because you attached the chest to the frame. My esthetics are happier
That is crazy. I have the same welder sitting on the same toolbox. And was planning to do the exact same thing. You beat me to it. 👍
I think its a brilliant design,simple and efficient,it covers all the possible scenarios,Cheers from Toronto Canada!!Good to know we are not alone in the snow!!LOL!!
Nice.
Simple wins! I created a welding cart out if a tool box…I attached the bottles to the cart and it was way out of balance. This is the perfect solution!
I had a damaged lista cabinet, and I did almost exactly the same thing. The only difference is, I left a shelf on both sides of the cabinet one side for shielding gas bottles and the other side for a small set of torch bottles.
Yeah...I have been staring at my porta-torch system and thinking about that. Projects are never done--only abandoned.
My welder on a factory cart has looked like a kids toy-box overflowing with things for years.....and this will be my first build as soon as it warms up. This is borderline genius. Thanks for sharing.
I watched a few videos--some from the big boys, and some from the 250-view tinkerers, and I stole the ideas that I thought fit what I needed. Plus, I got to play with a new welder. :)
@@Clough42 For semi obvious reasons I've been spending a lot of time watching UA-cam. Enough time that I should see if they have meetings available.....or maybe a home version of a 12 step program. I'm trying to connect some of the dots of what looks to be an interesting circle of peers. I am sincerely glad you put this video out. A simple build like this will be a great asset to my welding arrangement. The new welder looks nice and I'll admit I'm a bit jealous of your welding table. I'm going to shoot you a quick email.
Hi James, I would never comment about a youtubers appearance but looking at your chest, shoulders and arms your exercise routine is going incredibly well, it inspires me to get my 47yr old ass back to the gym. Oh love your content and always enjoy the presentation. Thanks for sharing
I just turned 49, and I only started three years ago, so you've still got plenty of time to get jacked. Go for it!
AVID CNC on the background !!!! :-)
Huh. Now that I look closely at the video, I think you're right. ;)
Lol "but I think the easiest way is..." TOT style, I love it! As usual, love your content James! Oh and thank you VERY much for detailing the equipment and tooling you use, I've been searching for a scale-friendly marking pencil for a lonnng time. That and the mig gun holder!
Those MIG gun holders are everywhere. You might also check Harbor Freight (or Princess Auto). They have them sometimes, too.
Next is to get him to say "Yahtzee" at parting-off time !
I love my evo saw as well, money very well spent. --for completeness as requested "A grindar'n'paint make me the weldar I ain't"
Happy New Year to you and your family.
Your knees sound like mine! I love your gently-paced thoroughness. Greetings and a good new year from Scotland.
James, your work is impeccable. Yes you're not perfect but that doesn't stop you and I appreciate that. Thank you
Love my 211, bought it for welding 304 SS, 32' feet in the air. After loading my old Miller white face, a full sized bottle, and my fat @$$ on the scissor lift, it wouldn't even go up. Paid for itself with the one job.
I'm not much of a welder, but I'm pretty impressed. The automatic wire feed management is on point. As long as I can keep from drifting away from the workpiece (or away from the joint) it does a beautiful job.
Nice. I have a Snap-on bottom box that I built a frame for. Added 6 inch wheels, and a Florida room at one end (Aluminum bent up storage area for larger items) Didn't worry about permanently fixing to the frame ... the weight alone does that :) Worked for probably 12 years moving the box around the tarmac closer to the airplane I was working on. Sittting in the garage since 1996 after leaving aviation. Good Job !
Excelente maestro Me dio una buena idea 💡 Tengo una cajonera metálica, parte de un antiguo mueble de cocina de chapa y lo voy a aprovechar para este proyecto Muchas gracia por compartir y un abrazo desde Argentina para ud
So many familiar tools, that rivet style nut is fantastic.
The welding quick-time-events Bzz-bzz-BZZ-bZzZ-Bzzrt! always make me chuckle. It's like a videogame building montage. XD
My cart definitely needs some TLC. This is good inspiration to start planning out some upgrades
I've watched a lot of weld cart builds,but I'll watch everyone,I like your take on one and making it to your needs. ZT is nice,but on a budget I'd rather spend the extra on more tools I need. I have had one of those riv-nut tools and use it a lot! HappyNewYear thanks for another great video!
Rivnuts are good for things that seldom need to come apart, AND aren't in danger of rusting. If you ever have to disassemble anything rusty that has rivnuts, plan on grinding them out & replacing them because they will spin.
I don't weld, but I appreciate those that do. Nice project.
If you don't weld, then the difference between you and me is about three days' experience. :)
You did it again, James. Another great vid with outstanding skill practices and intelligent reasoning behind the build....A great start to a New Year !!!
Loved your opening statement ! LOL! I bought those Harbor Freight welding carts for my Mig and Tig welders, but would love to build custom carts some day in the near future. See "Jimbo's Garage" for his welding carts display - wow! Happy New Year James.
Clough42, can I get an Amazon Affiliate link to your magnetic shims!? Also, I wanted to thank you for your contribution to the welding cart video pool. I can tell that your confidence isn’t quite as strong with fabrication, but you navigated this project in the same expert fashion I’ve come to expect from your channel. You’re a true craftsman. Thanks again!
When choosing which youtuber to throw, may i suggest ToT? Since he is only a pair of hands he’d be easiest to throw (plus you get 2 shots for 1 youtuber!) 😜
As always, awesome vid, you make an excellent teacher, I always learn something.
Feliz año Sr. James. Es un placer ver siempre sus videos. Felicitaciones.
Excellent as usual! For your next welding project try coped corner joints (similar to the bottle brackets) instead of beveled. They are said to be stronger although a little more fiddly to set up.
I've put most of my shop things, including file cabinets on bases like this, as well as make them for my clients. One thing i've stopped doing, is mitering the corners at a 45° angle, unless it's specifically for decorative purposes. I now notch all my short sides, like you did for the cross pieces. In doing so, I've never messed up an inside measurement, so the boxes and cabinets end up fitting perfectly. I do this for two reasons... so I don't have to mess up a measurement from the outside of the sharp miter, and I don't have to think about which direction the bevel is supposed to be. And I hate moving my Evolution saw out of square. It's always a huge pain, and there's chips down in the gauge groove I've got to fuss with, when I'm just trying to get projects done.
I do the cut on the little bandsaw for now, until I can get a legit ironworker with a coping notcher head, like the Piranha. That will be a game changer for my fab work!
Good tips. Measuring the miters is a pain.
I expect the casters will last for ever in your environment... but welding them on always triggers my "NO, NO, NO...." reflex! Happy New Year.
If you think about it, it's not hard to see his strategy. His goal is to acquire tools, and when it comes time to replace a caster, he'll have an excuse to buy another tool. Like a chess grand master, he's always thinking ahead.
Yeah, I thought about it, but they'll come off easily enough with an angle grinder. The larger question is this: are the parts galvanized under the powder coat?
Yeah there's a million weld cart builds. Lol. But something tells me yours will have something good in it. Pre-liked.
Happy New Year, James! Thanks for all your truly great, informative videos throughout the year, including this one!
James,
That MIG welder sounded really ‘dialled in” 👏
Great build mate…. Very clever.
I always enjoy your work.
HNY
Robert
Sydney Australia
That's the machine making me look good. I set the material thickness and left everything else on 'auto'. :)
Skookum, eh!
Me: "Honey, I need new welder."
Wife: "Why?"
Me: "I need to build a welding card for my new welder."
Really like this build but I’ve already spent too much time reworking my welding cart but this is just the inspiration I need to fab up something similar for my plasma cutter. Thanks and Happy New Year!
I just finished painting mine and you sir are cheating. That toolbox is a huge short cut :) I built mine so that it can fit medium sized plastic containers. Anyway, for me it was first MIG welding project, so I simply had to put in the work.
Another enjoyable project to watch, Thanks for sharing.
I think you'll be happy that you attached the drawers to the base the first time you pick up on the chest.
I did think the cross bar under the chest was a bit of overkill but that's ok.
I prefer to have the casters bolted on, it makes them easier to replace. Although the new ones bolt holes never seem to line up.
Happier New Year.
Great build I’m looking at a cold saw like yours. The only thing I would do is have all four casters swivel. It makes it easier parallel parking into tight spots.
I used the casters that came on the tool cart, but I am already seeing what you mean. Even adding just eight inches to the length of the cart makes it harder to maneuver.
Thanks for sharing 👍
Great cart build James...Happy New Year!
I built a cart like this but added two shelves on the right side for a plasma cutter and misc tools. THE toolbox was an old Craftsman that I painted yellow to match my ESAB welder. THE frame I painted JD green to match my tractor. Looking for part 2 to see how yours turns out.
Nice design!
When you put the first centre cross piece then offered up the second cross piece to the right of it (as we viewed it) I was convinced the first one was in backwards and was screaming at the TV. Luckily when you offered up the second piece it was not where it finally ended up. Looking good so far. My only thought is perhaps make the bracket which holds the bottles on also have a way of attaching the handle back on, rather than the usual chain. In other words the bottles are held with a quick release handle. Then you can pull it from that end too.
If the wheels on the bottle end swiveled, that would be more important.
OK, looking forward to the next part. I need to do something with my welder rather than store it on a shelf !
Everyone uses chain to secure their bottles, but I like using springs, it's much more secure than chain.
Perhaps you should define what you mean. Do you mean the spring has less slack? Or are you claiming the sitting is actually stronger?
@@Clough42 The springs I am using I think are 12" long and are taut around the bottles on my cart, such that the bottles are fully held against the bottle stand. With chain there is a little slack so even if you took up the slack to 1/8" or so, the bottles would still rock a bit. I also use 2 springs, an upper and a lower, rather than 1 length of chain.
As far as actual strength goes, any chain mount will fail long before the chain fails, especially since the link is going to slot into mild steel, so im not entirely sure what the questions is about.
From what I can see, people use chain because it's easy, and aside from a bottle clamp, it's what has always been done in the past, I like my solution because the bottles do not move in their rigging at all.
@@mkeyser people use chain because OSHA safety regulations require "chains or straps".
@@Clough42 My straps are springs. ^^
@@Clough42 How much OSHA compliance are you trying to live up to in a garage shop?
Flammable liquids cabinets? (Acetone and IPA)
Hazardous materials in segregated cabinets? (Paint, etc)
Exit signs?
Fire extinguishers?
Fire sprinklers?
Fire blanket?
Ladder secured to wall instead of leaning on it?
2nd person on site when you're welding to put you out when you catch fire?
Goggles and Face guard when grinding?
I like having standards too, but at some point its flag waiving because you're not really compliant.
I'd love to have a flammables cabinet, and diamonds on our garage door, but you know it only alarms the neighbors, and then you get the fire department showing up to conduct an audit, and they have, and they did, and they left.
I learned early on in welding that pretty is wonderful but structural is necessary ... Your welds look structural so no worries, pretty comes with time and welding... Or in my case never ... that's one of the uses for grinding disks... Nice job ... Thanks for sharing ... Stay safe ... Happy 2022...
Dang, you are making me want one of those fixture tables for my shop. Not enough space though.
They're pretty sweet. They don't give them away, though, and you always need more clamps.
Great video. I'll use the same technique to make a similar base for a different purpose !
Nice clean install. I like it.
"Put your AvE quotes down in the comments." 😂 Something like "A grinder and paint make me the welder I ain't"?? That's my motto when applying the angry pixies via MIG or TIG.
That's the one.
Nice job as always. Ciao, Marco.
been searching for hours of video of guy taking bolts out of wheel assemblies
@17:35 awwwwww...
12:15
This UA-cam thing has made you a bit sour heh? I think you do terrific work. Forget about the Trolls and keep up the fine work sir.
I've been waiting to watch a welding cart video all year. ;-) Now off to my woodshop to finish a bench for a new PM lathe. Oh and BTW your welding sounded pretty good, hard to see in the video but I'm sure that you shouldn't be embarrassed. I think that I saw once that you live in Boulder CO and was hoping you were safe these past few days.
I was noticing in the video that the arc sounded pretty good. The Millermatic 211 manages the wire feed speed automatically, so all I really have to do is maintain the right distance and keep moving.
Wishing you and your family a happy new year James.
That's a nice design and build. But I confess I spent almost as much time trying to figure out where was in those "Avid CNC" boxes in the background as I did watching the build. 😁 That is the first big purchase on my list after I get a bigger shop; hopefully I can find a configuration that will work well for both wood and aluminium. I'm catching up on videos after 2.5 weeks on vacation up near Boise, and I was envious of all the big 3-car garages I saw around there. But it was _cold_ there last week!
But we need welding cart build videos featuring cats!
I can see that.
Nice work and nice welder 👍
I love your mini right angle welder. I sadly only have the full size versions. And not cordless.
Also, buying that cart kit would just be silly. Then you’d have to find another excuse to tell your wife when you *need* more equipment. Start buying things you can make… and the jig is up, my friend.
"it's a little too expensive", says the guy that only buys brand new machines.
In his defense, I always prefer to build items like this, as that way it has just the features I want, and not more that may be a hinderance. Besides, rolling your own is usually cheaper.
The used machine market around here is pretty sparse.
James, nice video and appreciate the "low-tech" approach. Any suggestions for a low cost "CAD" program for someone with more time than money?
Hi James,
Happy New Year to you and the family. Excellent build. Should suit your needs for years. Stay safe.
I think I saw Avid CNC boxes there :)
Another great video!
Your gym needs those plastic strip curtains, to keep all those metal shavings out of your gym kit. The meat wholesalers use them to partially isolate their cold areas...
The struggle is real. The machine tools are generally okay, but that evolution saw is the worst.
Are you considering a strap over the welder? I know ive stumbled over my cords once or twice and I've been thankful for the rails on my cart.
It's a trickier solution on MIG machines because of the access door, but it can be done
James, you have a bad case of GAS. I stole that from one of my other habits, photography. It's Gear Acquisition Syndrome. There is no cure, but fortunately, there are no real detrimental effects, other than to one's wallet. I suffer from it as well, and one of its symptoms is the refusal to use the incorrect tool for any given job (other than the occasional use of MIG pliers as a hammer). Happy new year, and I'm looking forward to the next video, whatever it may be.
I'm very fortunate to have a hobby that generates income, so it doesn't bankrupt me. :)
@@Clough42 Btw, I saw the Easter egg over your shoulder on the pallet. Gotta feed that CNC addiction...
James, if you want to improve your welding overnight, you have to go buy a FR blue jean pearl snap and wear it instead of your jacket.
Bonus points if you buy some LeHighs and a can of grizzly wintergreen.
And maybe a patch with my name on it?
Happy new year! I used the same toolbox and only added go-cart wheels by the bottles. Warning! Tool box too small! 😜. I used the existing wheel mounting threads to attach the frame and put upright angles on the bottle side of the cart that attached to the tool box. Lots of flat plates too. I added a second deck to the top to accommodate my Tig cooler. I spent too much time and money but the only thing wrong is the box is too small.
I love your videos!
The biggest challenge in my shop is space, so I wouldn't want to go much bigger, but I totally get what you're saying. I was looking at it this morning and thinking about whether I could squeeze my oxy-fuel rig on it somewhere.
there is nothing worse on a cart (in a small shop) than 2 swivel and 2 fixed casters. All wheels should be swivel casters so the cart is easy to position just where you want it. having to push a cart back and forth, back and forth, to position it in a tight space is not only frustrating, it is sometimes impossible to do at all. The only reason to have fixed wheels is if you have a large shop and frequently need to move carts long distances or you are participating in shop cart races.
Or if you have two fixed casters because they came with the toolbox.
@@Clough42 Yes, only 2 swivel casters to save the mfg. $3-4 is a pet peeve of mine. Still, I spend the extra dollars necessary to make the cart useable. Kind of like adding a DRO to a mill or an ELS to a lathe (lol). BTW, the best cart available is the US General 27 x 22 from HF and they do sell an aftermarket swivel set.
Happy New Year!
Happy New Year James. well done 👍👍😎👍👍. Your grunt at the end sure sounded just like me, and I can't even get that low anymore. Hopefully that was a good warmup stretch for that snow shoveling you were headed out for 😀. All the best to you in 2022.
If you do decide to squat that low, I recommend getting the shot in one take. :)
tidy and functional. Next week... Knee counterbalances
That microphone did a good job picking up your joints. I know that sound all too well.
Good use for your Husky cabinet. Now, what are you going to build for that cut-off saw that was on it?
Fancy, very nice! I was going to build my own from angle iron but decided to just buy a cheap one (equivalent to the cheap one hf sells) or I'd likely never get to it and I'd trip over my welder till the kids move out. I don't have bottles yet though. I assume you don't actually buy all your material from your local home store, or you wouldn't have any money left for tools 😉 one of these days I'll go to a metal seller...
Most of my metal comes from a local supplier that stocks everything up to maybe 9" round bar and cuts to length on demand. For the truly large structural stuff, there's a steelyard about 20 minutes west of here. I despise the crappy hot rolled stuff at the home center, but they're open nights and weekends.
4:20 "hearing protection is absolutly must for this tool",no i am fine,just turned the volume down a bit.
I turned it down about 25dB for you. :)
A friend made one nearly exactly like this about 5 years now, husky tool box and all. He past suddenly before he could paint it. I am not to painting the cart in reverence to him. If I can figure out how to post a photo of it here I will.
I hate painting. It's messy and I never seem to be able to get the paint to set up hard. But when it does work, it looks nice.
@@Clough42 Agree 100%. Thanks for sharing!
Looks like me you need to take cod liver oil for your joints.
Nice job though!
My joints are fine. Crepitus is harmless. I just spent way too many takes squatting in that awkward position.
Happy New Year to you and your family James! Great build.
Milwaukee metal cutting Circular Saw 8 in
I'm looking forward to how this turns out. We can never have enough welding cart builds can we?
Did you consider putting the welder on the bottom? I mention this for several reasons.
The centre of mass is kept low, protecting the welder from knocks, and the top of the cabinet can still be used for keeping tools at hand with a convenient height. Also, with a simple frame over the welder the original caster fixings could be used to hold down the cabinet, and a convenient space for cable storage between welder and cabinet.
Nice build so far James. Happy New Year!
The cabinet is way heavier than the welder in this case. The filler metal and clamps account for most of the weight.
@@Clough42 Ah good point. It also just dawned on me that modern IGBT models are much lighter too.
Well run to shovel :D
I see some avid boxes a cnc router ?
I love the cart build . . . Are you thinking about getting a welding fume extractor? I don't know how much you are planning to be welding but it's a good investment. Even a respirator for welders would be a good piece of PPE. Some of the materials you might be welding could be galvanized, and those fumes are really bad no matter what.
If I welded every day, I think a fume extractor would be a must. As a hobbyist who will tackle projects a few times a year, it's a big investment.
Another great fusion video thanks.....
I need to replace my computer as I can barely post 2.5 d. What would you recommend?
I would love to know more about the rivnut tool. I've done two jobs on my ute with them, the first I under clamped and ended up getting the rivnut jammed, but spinning in the hole, second time I ended up over clamping and breaking my rivnut tool...
I think in future I'm just going to use a nut and bolt to finish the clamping process and only use the rivnut tool to initially seat it, but that's things for another day, for now, I'm just going to have to use a nut and bolt to seat and fit nuts for now.
Huh. Don't know about that. It's adjustable, but the ones I've tried went in fine.
I bought the pop rivet style one from Kincrome, although I didn't use the adjustment feature when using it, that was probably where I went wrong. Just squeeze till I can squeeze no more, then do it two handed, and pop when the mandrel.