Here is a link to the file: cad.onshape.com/documents/a2844bd8fab631c0de7eb5e5/w/9f50be008999ef7865c8ca16/e/312b97951412e64e19e1e287?renderMode=0&uiState=64413d857e71fa380487883b
It's been some time since I published this tutorial. I found that I had it defined by 122 degrees instead of the 120 I would have considered appropriate...
Here is a link to the file: cad.onshape.com/documents/a2844bd8fab631c0de7eb5e5/w/9f50be008999ef7865c8ca16/e/312b97951412e64e19e1e287?renderMode=0&uiState=64413d857e71fa380487883b
Could you point me in the right direction about how you calculated the geometry for the slots on your cam?
It's been some time since I published this tutorial. I found that I had it defined by 122 degrees instead of the 120 I would have considered appropriate...
This is with 3 sliding spokes, would like to see how it would work if it is with 9 or 12 spokes...
Why don't you give it a try?
Can this be used as a self center chuck?
sounds like a good idea!