DLSS just causes too much ghosting, and I loose a lot of fidelity in the cockpit and don’t gain that much FPS, I recommend TAA, just look at the difference in the G1000!
@@g-locmedia yes, especially moving to a 40 series card and using frame regeneration, TAA has been my go to. DLSS in MSFS just has limitations due to not using the full range of multithreading
Please explain soon how you framed a structure to hold the three 55" monitors. I am convinced by your videos to invest this direction (3 x 55" Hisense U8K) and wait out VR for a couple of years. Thanks.
You buy stands from next level. But there are heaps of different styles. I just got to make sure it all fits. Does take alot of space. Haha. I pretty much have the same set up. I'll reply on what stands I use.
I think it's fine. I have mine in a spot where I'm not touching them or moving them, so they are holding pretty well. And they do the job. But there are definitely different options out there. I just went with next level because I like their products and so far so good.
I think it's fine. I have mine in a spot where I'm not touching them or moving them, so they are holding pretty well. And they do the job. But there are definitely different options out there. I just went with next level because I like their products and so far so good.
Bro! You’re testing the Brunner Yoke (Keep it and sell the Simionic). Rudder Peddles? Again, you will be very happy with the Brunner FFB Peddles. I love mine and will never look back.
just found your channel, loving the guides and reviews! how did you connect the main displays? i have a 4090 and it only had one hdmi port. im now running duel gpu, 4090 for the main 4k display, and a 3080ti for secondary monitors and flight screens as i ran out of hdmi ports
Thanks for these. I’ll compare against mine later, though I’ve only got a 6700XT. On a side note has anyone ever tried triples with monitors of different sizes and resolutions? I have two 27” that I’m thinking of combining with an LGC3 48”. Turned on their side they match the height of the 48” and for me to add some side view would be better than nothing. My room could never accommodate 3 55”. Thanks in advance.
@@g-locmedia I was contemplating a Quest 3, but like you I’m not yet convinced by VR. I think triples would be better for me as I also do driving. With my space I think one large primary screen would be better for the immersion. A 48” would fit on my desk with the side monitors on arms. Will probably look at a 48 in the New Year.
I don't know if it's available, but you could try a custom resolution of 3200x1800. Which still looks really nice. Or try lowering your side monitors resolution a bit?
Thanks for posting these types of videos. Very informative. Question 4 ya- I heard you mention that your goal was to (simulate a 1 to 1) as closely as possible. I know you have three 55" Qled monitors. Has that gotten you pretty close to what you wanted? Of course money always plays a part in someones selection but would 65" or three 75" monitors be overkill or too large for being so close to the 3 monitors. Again, its not like your sitting back like one typically would watching a 65" in a Family Room etc. So, in your opinion would trying a large 100" 2k or 4k projector at least for main center screen be too much and have your 55" for left and right sides? Again, I'm still fairly new to custom Home built flight sims myself. Even a Short Throw 4k projection might not be super crisp sitting 3 feet or closer in a flight sim setup? I know if "might" work for the scenerio and environment but reading cockpit instruments might be slightly blurry?
If I had to buy 3 new monitors I’d probably still got for 50 or 55”. I feel like it’s the sweet spot. If I was on a sing glee monitor maybe I’d go for the 65”.
I don’t have much experience with projectors so I wouldn’t want to comment on that but from what I’ve seen a large TV just gives better contrast and fidelity.
I tried 2-3 projectors for the fun of it. the cheaper ones for starters to learn more about them before spending more money. I believe its better to get awesome 2k or 4k monitors with faster response times and HDR Qled or Oled screens. Unless one is spending $$$ to get a decent 2k-4k projector that has sharpness, response times and color vividness its hard to beat a smaller, higher pixel count with monitors or TVs today. Again, for watching TV while sitting 15ft away on a sofa they're great but when up close its tough to get that really needed sharpness and realism. Again, I haven't actually seen MSFS2020 on an expensive higher end model projector so until then I can't talk much about those overall etc Thanks again 4 your reply PS- I know its important to get the same make and model 3 monitor setup. But could one get a larger center monitor say a 65" & keep the side 55 inches. would they line up correctly and would it work or just keep all exact same sizes?
Very helpful, thank you!
DLSS just causes too much ghosting, and I loose a lot of fidelity in the cockpit and don’t gain that much FPS, I recommend TAA, just look at the difference in the G1000!
I’ll have a look at TAA. Thanks for the suggestion. Have you always run TAA?
@@g-locmedia yes, especially moving to a 40 series card and using frame regeneration, TAA has been my go to. DLSS in MSFS just has limitations due to not using the full range of multithreading
I cant find msfs in the program settings but i did buy it on steam
I use Nvidia aswell, you just taught me something new 💯🙏🏾💪🏾
That’s awesome.
Please explain soon how you framed a structure to hold the three 55" monitors. I am convinced by your videos to invest this direction (3 x 55" Hisense U8K) and wait out VR for a couple of years. Thanks.
You buy stands from next level. But there are heaps of different styles. I just got to make sure it all fits. Does take alot of space. Haha. I pretty much have the same set up. I'll reply on what stands I use.
Next Level Racing Free Standing Triple Monitor Stand Supports 3 x 32- 65”
@@lovestospoons2652 I was considering this NLR stand. I read the 1 and 2 star comments. What is your direct experience?
I think it's fine. I have mine in a spot where I'm not touching them or moving them, so they are holding pretty well. And they do the job. But there are definitely different options out there. I just went with next level because I like their products and so far so good.
I think it's fine. I have mine in a spot where I'm not touching them or moving them, so they are holding pretty well. And they do the job. But there are definitely different options out there. I just went with next level because I like their products and so far so good.
Bro! You’re testing the Brunner Yoke (Keep it and sell the Simionic). Rudder Peddles? Again, you will be very happy with the Brunner FFB Peddles. I love mine and will never look back.
Yea mate. They are superb products. I would sell the Simionic but it’s handy for doing comparison videos.
just found your channel, loving the guides and reviews! how did you connect the main displays? i have a 4090 and it only had one hdmi port. im now running duel gpu, 4090 for the main 4k display, and a 3080ti for secondary monitors and flight screens as i ran out of hdmi ports
I used a display port to hdmi converter
Thanks for these. I’ll compare against mine later, though I’ve only got a 6700XT.
On a side note has anyone ever tried triples with monitors of different sizes and resolutions? I have two 27” that I’m thinking of combining with an LGC3 48”. Turned on their side they match the height of the 48” and for me to add some side view would be better than nothing. My room could never accommodate 3 55”. Thanks in advance.
That a great idea mate. I’ve never done that but also keen to hear from anyone that has. Let me know if you ever get that working. Very interesting.
@@g-locmedia I was contemplating a Quest 3, but like you I’m not yet convinced by VR. I think triples would be better for me as I also do driving. With my space I think one large primary screen would be better for the immersion. A 48” would fit on my desk with the side monitors on arms. Will probably look at a 48 in the New Year.
@@g-locmedia AFAIK - Same size is best. Center Monitor at 4k. Side Monitors at 1080P.
I don't know if it's available, but you could try a custom resolution of 3200x1800. Which still looks really nice. Or try lowering your side monitors resolution a bit?
I’m getting pretty smooth result at the moment but it’s worth a shot. Maybe I’ll be able to run the gloss’s cockpit refresh on medium.
I have a question when it comes to the screens. Im looking to buy 3 screens like yourself. If you would buy new screens today what would it be?
What’s the budget?
@@g-locmedia It's 4000 Dollar any suggestions?
I don't get it... you have all this realism with a sim pit but leave the POI markers on in the sim wrecking havoc on any sort of actual immersion...
@@foxtrot789 makes it more enjoyable for me. Everyone's different though.
Thanks for posting these types of videos. Very informative.
Question 4 ya-
I heard you mention that your goal was to (simulate a 1 to 1) as closely as possible.
I know you have three 55" Qled monitors. Has that gotten you pretty close to what you wanted?
Of course money always plays a part in someones selection but would 65" or three 75" monitors be overkill or too large for being so close to the 3 monitors. Again, its not like your sitting back like one typically would watching a 65" in a Family Room etc.
So, in your opinion would trying a large 100" 2k or 4k projector at least for main center screen be too much and have your 55" for left and right sides?
Again, I'm still fairly new to custom Home built flight sims myself.
Even a Short Throw 4k projection might not be super crisp sitting 3 feet or closer in a flight sim setup?
I know if "might" work for the scenerio and environment but reading cockpit instruments might be slightly blurry?
If I had to buy 3 new monitors I’d probably still got for 50 or 55”. I feel like it’s the sweet spot. If I was on a sing glee monitor maybe I’d go for the 65”.
I don’t have much experience with projectors so I wouldn’t want to comment on that but from what I’ve seen a large TV just gives better contrast and fidelity.
I tried 2-3 projectors for the fun of it. the cheaper ones for starters to learn more about them before spending more money. I believe its better to get awesome 2k or 4k monitors with faster response times and HDR Qled or Oled screens.
Unless one is spending $$$ to get a decent 2k-4k projector that has sharpness, response times and color vividness its hard to beat a smaller, higher pixel count with monitors or TVs today. Again, for watching TV while sitting 15ft away on a sofa they're great but when up close its tough to get that really needed sharpness and realism.
Again, I haven't actually seen MSFS2020 on an expensive higher end model projector so until then I can't talk much about those overall etc
Thanks again 4 your reply
PS- I know its important to get the same make and model 3 monitor setup.
But could one get a larger center monitor say a 65" & keep the side 55 inches.
would they line up correctly and would it work or just keep all exact same sizes?
Have you ever seen OLED monitors running MSFS2020? @@g-locmedia