My Back Flow Device Is NOT Sealing "It Is Chugging"
Вставка
- Опубліковано 14 кві 2020
- This is a quick video tutorial on explanation of a common problem property owners have when their back flow is not sealing. Some say it looks like the back flow is "Chugging". Common problem when turning on an irrigation system.
- Фільми й анімація
Thank you for making this easy enough for a stressed pregnant woman to understand. No other video talked about the instantaneous seal like you did! I feel so empowered. I could buy a stroller with the money I saved with this video ❤️
I hope your seal didn't break while you were in the middle of watching this video on broken seals! Although rough, you'll be glad you watched it to the end. Knowledge is its own reward! Did you name the baby Chuggi? Pronounced like Chun Li. Or the more formal Backflow P. Jones? Or did you name it after the plumber whom you called?
CONGRATULATIONS!! 😉 👍
You are a life saver! I watched a bunch of UA-cam videos on this topic and yours was the only one that explained the issue and solution clearly. Thank you
JUST the video I needed. I was certain we needed a full replacement or at least a repair. Found this video after I disassembled the whole thing (sigh) and this is all i had to do in the 1st place. Husband normally does this and Im proud to have figured it out myself! thanks for a great, detailed video!
Thank you! I was turning the valve on the downstream side on too quickly so the water was spraying out from beneath the cap. Your video showed that you turn that valve on slowly and that was the missing piece for me. Thank you again. I am now subscribing to your channel.
Thanks so much for posting this video - this was exactly what was wrong with my system and its working like a champ now
Thanks! I replaced bonnet and it kept pouring out water, but that's because I was slowly turning it on, expecting an instant seal. You mention turning it on to full right away, so that the pressure will create the seal, and this worked.
My Febco is 5 years old when I changed it last. Pulled it apart and didn't find anything wrong. Found this video Baa Boom fixed my leaking from top.
Haha Thanks Mr. Schepers. When I closed both lines and started up the house line first build the pressure and then opened the irrigation. Viola no leak from top.
Thank you so much. I was about to go the "repair" route and I just needed to follow the proper sequence to resolve my issue.
I can’t wait to go home and try this, i just replaced the poppet and bonnet and thats the problem am facing now.
Edit: My problem have been fixed. Thanks a lot.
Appreciate this video, this solved my issue and I am very happy I didn't call for a repairman, which I thought I should do when I saw that water chugging!
Thank you - bought a new gasket and went from a slow leak to this chugging. Tightening the top nut and then performing this sequence worked well.
Repaired mine last winter as it froze quite quickly and broke. Did everything slow and steady as to not brake anything - just not enough pressure for the pop and socket to seal. Great video - Thanks!
Perfect solution to my frustration. Thank you for posting it.
Mine was doing this while using air to blow out system, must've started to low on air pressure...followed ur vid and it fixed it. Thanks
Thanks a lot, you saved me lots of money. I kept turning the water slowly and expecting the seal. I turned it off trying to call a professional, but gave it another try with your video. Turned it full blast and it sealed instantly. I thought I was going to have to replace the whole thing again.
Nice work, thanks for watching!
Awesome video. Certainly saved me some cash in having someone come out to look at this.
Thank you for watching!
I'm almost upset that it was that simple- THANK YOU.
Thank you for this video! Was able to fix my system.
Thank you! It work exactly how u explained it.
Thank you so much for this! You saved me money!
Thank you very much, you saved me the time and the money.
Greatly appreciate the video, this morning while I was fertilizing the lawn, I noticed back flow was "Chugging". Watched the video and followed the instruction and no more water chugging with the sprinkler working nicely after I re-pressured the system. Should I replace the bonnet and poppet anyway? I am afraid one day it leaks again especially if no one is home. Thanks again !
Man, I installed the same bonnet and popper, had a spare, but this time, it kept leaking. I closed the underground valve off as you showed, then turned it on, and it sealed right away. Unfortunately for me, it revealed another issue down in the control box area, but it is no longer leaking under the bell hood. Thank you sir!
Thank you for watching!
Thank you so much - I thought for sure I needed a new one - but I did what you said and Boom it worked - saved me 159 for the part and I’m sure 100 for instal so I’ll be eating my T-bones and thanking you !!!
Thank you for watching!
Just what I needed to get the device to seal.
Thank you do much! I thought it was broken when I see that much water bursting out. Was thinking to ask help from plumber 😅
Hello, glad we can help!
Thank you !!!
Thanks!
Thanks so mich for this video. Very helpful. I do have a question though - when i turned the outdoor valve on, I started losing water pressure inside (sinks, toilets, etc.). Would
that indicate a break somewhere in the irrigation line? Internal water works fine when external isn’t on. Thanks again!
Hello, it could be or just the irrigation lines filling taking a majority of the water. Hopefully after the irrigation lines are pressurized you regain pressure inside.
@@SchepersLawnSprinklingSystems
How long would you reckon that would take for the irrigation to pressurize, if you don’t mind me asking
Typically within a minute
Could decreased or low pressure from the main line cause leaking from the bonnet/? And any ideas on what would cause low pressure when pressure throughout the rest of the house is fine?
Hello, if you are using too much water in the irrigation system, like turning it on too fast or a major leak it can cause the poppet and bonnet to not seal, even if you have good water pressure in the house. Hope this helps!
My system had stink bugs clogging the bonnet. Removed the bonnet and check valve and ran the water to flush them out.
Hello, yeah that is not uncommon!
Mine still is chugging. It happens right at the end, when I turn the second valve from 45 degrees to full on, like around 1:50 min of this video. Until then it is good and sealed. Turning on all the way leads the poppet to drop and start chugging. I have changed poppet, bonnet, and check valve and all rubber. Is there another trick about turning the pvb on? Thanks.
Hello, check that the valve supplying the back flow is fully on and you have good flow and full pressure to help keep the the poppet sealed to the bonnet. Also, make sure you have no zones on at the time you are turning on the irrigation system and you are only filling the main line with water and getting the main line fully pressurized. Hope this help!
So what would cause water to continuously flow out of the top even with a brand new poppet and bonnet? This is happening even turning on the inlet.
Hello, check to make sure the poppet and bonnet are sealing. Also, ensure there are no cracks in the seal on the poppet. Hope this helps.
I had to replace the bonnet and poppet since it busted this winter. After replacing it and opening the valve it seals properly but when I turn on my sprinklers to test them all sections have very low pressure and the sprinkler heads don't come up. Other sections will just cause the backflow preventer to chugg like in this video. I tried doing everything you did but I'm still having the issue. Any ideas?
Hello, you have a restriction somewhere, check that all your valves are open including on the water meter. Hope this helps!
@@SchepersLawnSprinklingSystems The only other valve is in my garage and that controls the water to my entire house. I checked it and it's good. I also checked under the green plastic covers in my front and back yard to see if there were any other valves but they're all solenoid controlled. I'm completely at a loss. I may need to call in a repair company to check it out at this point.
My system doesn’t have the valve to control the water supply to. How to turn on the system after winterize?
Hello, most municipalities require a back flow device, but some homeowners have just a valve to turn on the irrigation. Hope this helps
Thanks for making it simple!
Thank uou
How do you stop the bottom peacock from leaking?
Grab a regular screwdriver and turn left or right until the water stops leaking, hope this helps
I did everything you show but I still have water coming out. What could be the cause?
Hello, one of the seals could have a crack or some type of debris could be stuck in it. Hope this helps.
I just recently done this and now i have low pressure to all my zones except 1. Please help
Hello, in this situation zone 1 is typically stuck on. Hope this helps!
I even don’t have these valves. I just have a control box.
I followed these steps but mine is still chugging. Does it need to be repaired / replaced?
Hello, depending on the model and manufacture it may need a replacement poppet and bonnet.
@@SchepersLawnSprinklingSystems thank you. I went out and bought a new one but ended up not needing it. Old one wasn’t sitting properly against the seal for some reason. Will keep new one on hand in case it reoccurs but makes me wonder how it got messed up in the first place.
as soon as I open the line in the basement, water is running like crazy outside.
Uujku Kim Kik
Mine has a small leak and plumber said I need it replaced. That’s about $1500
Hello, that seems high, a regular 1” Febco PVB is around $165.00 retail, plus cost to install.
Change it yourself, very ez. Cost me 99 bucks from Amazon. That plumber is charging way too much.. Should not cost more then 500bucks max IMO..
He c
Thank you!!!!!
Thank you!!!!