Pro Drywall Finishing Tips on How to Finish Internal Corners
Вставка
- Опубліковано 16 бер 2019
- Here are some pro drywall tips on finishing internal corners with a compound tube and corner flusher. I had the chance to use it a few times to mud up a few internals and can see the time it can save after a bit of practice. To Subscribe goo.gl/dDcLgJ
Go & check out what the boys are working on / drywallgangsters
Check out all the steps these guys do to make a perfect Drywall finishing job
Episode 1 goo.gl/SDJN6a Drywall Construction Workers Trick Finishing Butt Joints.
Episode 2 goo.gl/r3xVfu How to Tape and Coat Drywall Joints and Internal Corners.
Episode 3 goo.gl/eycq3B Drywall Taping with the Tapepro Mud Box.
Episode 4 goo.gl/pBvLTu How to first coat a drywall screw.
Episode 5 goo.gl/as9777 Drywall Crew Taping Ceilings & Walls Fast.
Episode 6 goo.gl/BV2hgo Cómo encintar y tapar un muro en seco.
Episode 7 goo.gl/21esJR How to install drywall corner bead.
Episode 8 goo.gl/UEjPTf Drywall Taping House of Internals & External Corner Beads.
Episode 9 goo.gl/XjihXH How Pro Drywall Finishers Coat Corner Bead with Hawk & Trowel.
Episode 10 goo.gl/D3Hgxg Pro Drywall Plastering with the Hawk and Trowel.
Episode 11 goo.gl/2FxwCS Drywall Plastering Skim Coat a Niche Wall.
Episode 12 goo.gl/DyxwqR Drywall Finishing with a Columbia Drywall Flat Finishing Box & Pump
Episode 13 goo.gl/i54Afu Drywall Plastering with Flat Finishing Box Ceilings Walls
& more videos
Hey Send Your Construction Videos to - driveuploader.com/upload/dgXj...
Don't miss a video Subscribe Now! goo.gl/dDcLgJ
Follow Maxkil on Facebook / maxkilptyltd
Follow @Maxkil2 on Instagram / maxkil2
If your a professional and your business provides this service in your local area, wherever you are in the world, I invite you to add your skill set to a listing on my website global.maxkil.com/
Amateur work, why would you use flushers instead on angle heads, why, WHY, is there NO SCREWS on the walls, why would you use 90 degres trowels, why do you use mudbox when you clearly dont know how to use them, learn how to use trowels then only then switch to boxes
Even an amateur knows there's glue used in Australia and less screws, check some Trowel videos, where's your video showing how it's done protime?
No worries mate
mischst du vegemite, um diese scheiße gelbe Farbe zu bekommen?
Them flats looks nasssstyyyyy
I’ve been a painter/drywall finisher for about 4 years, and I’m self-taught, and doing it the old school way. I have learned a lot watching your videos, and it appears that I have to buy some new drywall tools to improve my efficiency. Thanks!
Nice job mud runner does everything two guys are doing without half effort. It’s all a learning curve. Muscle memory
Awesome work!! 😎😎😎😎
Good job
Thanks Israel, you should see some of their work on Instagram
Great work, the boys are spot on!!!
super master....
Another good video. This is how I finish my internals.
Should make some more fixing videos in the near future! Good crew!!
nice to finally see you guys doing your inside corners
Sorry about the delay I went around the world
Why coat by hand first instead of using the flusher?
finisher
hallo a'm finisher im from Cuernavaca, México. Thanks
Hey Benjamin, Nice to meet you! can i ask... Can you buy things from Amazon USA from Mexico?
You guys are killing it ! Much respect from New Zealand 🇳🇿👍 be safe team !
Im coming to Queenstown tomorrow for a few days
Can you show how you did the tape and glaze before the finish coat?
Great to see your videos!
I have a tip, you could add in the description of the video the links to purchase the tools used in the video ...
So you can even start with the nominations ... Thanks for the videos .
Why do you guys do it in two stages rather than in one-stage with the tube and wiper all-in-one? I bought the Columbia tube plus a flusher or a wiper depending on what you call it. I started to get the hang of it the second time I used it (the first time was a total mess with some rounded out corners and lots of sanding) but I just do small jobs and very occasional drywall work so I haven't decided whether or not I like it.
Also I'm curious how your detailing out your ceiling, where your wall meets the soffit box it looks like a pretty standard detail that we would see here in the US, but where the wall meets your actual ceiling it looks as if you purposefully left a gap everywhere what do you do there?
Great work lads! Efficient, neat and modest. Exactly what builders are looking for in plasterers (pity your not in Melbourne).
I can see the boys fired the camera man, three try’s and out!
Good video guys do the same job in the USA and I'm hesitant not to buy the Mudrunner, or this other tool you use. Best regards
Rudy Flores don’t be once you use the mud runner getting mud constantly mix just a tad wetter than angle box you can’t do angles any faster now price wise will be cheaper this method but your time will pay the difference in three houses just keep it clean and watch the screw on the bottom of twist. If you do loose screw it’s usually going down the road from vibration use the light lock tight.. Once again if you do loose the screw it’s the same screw on angle head in a pinch. These guys on Maxkill our good I’m just not sure why they use this method. Add up the time three guys on angles when one guy running mud runner could still go back hit bottoms while one guy can hit tips with half the time. I’m just an old finisher from Iowa I’ve worked in many different states skimmers get used a lot in Europe and Australia.
@@kidjetrecon7153 hey I'm from iowa and an apprentice.
Michael Carson hey send me an email at Kane.curtis@gmail.com would be glad to give me your number. It’s hard finding good help especially with the COVID . I’m willing to set you up with a mud runner if we live close enough we could still work something out. I love meeting new people exploring options for work. I’m not really busy at the moment a big project fell through because of Covid and I’m not sure when it’s going to start.
@@kidjetrecon7153 Hey thanks. I'm actually by St.louis now. Moved down a year ago. Originally from Iowa. Worked for a company in Cedar Rapids.
But appreacite the offer.
Michael Carson happy finishing I’m personally two years away from panning gold living the dream.
Una pregunta
En NYC también se usa esa maquina?
Vicente Sanchez Cleo q si aquí en USA la venden
Hey guys what toppy do you use?
Why you drywall sheets don’t have screws? That is not good
Glue in Australia
Glue ?!?! Is that sarcastic?
Why the fuck is the mud orange
Fantastic... where do you sell those tools?
Hi! Nice video. That camera?
Hey man you like it? Its a DJI OSMO Pocket,
How bold is a paste teacher?
Why not just use angle box only one tool instead of two
Hey Justin did you see the link to upload a video Google drive
Amateurs
ผมต้องการอุปกรณ้การฉาบฝ่าต้องติดต่อที่ไหนครับ
I cant watch amy more after the first e min
Learn to use the tools properly and youll save so much more time equaling more pay if you work piece..if by the hour then i get it..tube guy needs work
Nice thumbnail
Cheers man, how's the studio? You in there yet? I listened to Get'n to the Money. Some nice verses in there!!
@@Maxkil thanks man I'm almost done. I just got discouraged for a minute. It's almost mission complete now
I hear you man, im getting discouraged too sometimes, just got to stay on that path. Email me man I want to give you a studio warming present! admin@maxkil.com
@@Maxkil definitely just hath to keep pushing. I'm back focused now. Im going out there in the next hour and do some work. Oh and yeah I'll definitely email you thanks man. networkproduction1@gmail.com