@@civilengineerfbh277 hanji sir aap batate bahot achhe se hai mujhe classroom me sir batate hai to samjh nii aata but aapki video dekh leti hu to samjh me aa jata . .... So your video is to good and very helpful 👌👍
For the reading on vernier it clearly shows 5 minute exactly matching with main scale. We should judge from the main scale where our index is and judge from that what approximate seconds reading would be. Then look at that approximate seconds reading and you will find the matching line from vernier to main main scale. ( This is based on the figure used by the lecturer.) see the location on the index lying on between the minutes reading and you will find that it is at quarter distance away from the 20 minutes that is approximately 5 minute and see it is matching at 5 and 40 seconds and not 20. So total angle is 10 degree 25 minutes and 40 seconds not 10 degrees 40 minute. Has it been 40 minutes the index would exactly touch on main scale at 40 minutes. As you can see it is not so. The effort however is good.
It will suffice the work that a civil engineer would be doing in the field, so thanks for that. But, I would suggest that you should also explain the logical reasoning behind the method; that would probably be called a better explanation.
Sir.... If d is the smallest value of the main scale and v the smallest value of the vernier scale, then the least count of the vernier is given by....(1) d-v (2) v-d (3) d/v What is the right ans...and why....Please explain....Sir...
Sir Please explain by using instrument so it could understand more effectively..... further anything you explain by using the instrument at the site...
a theodolite circle is divided into degrees .the degrees are divided into 2 equal parts. design a direct vernier and retrograde vernier to read upto 30 seconds? iska value kaise nikal na hei?
I think their is a mistake in the video , if minutes readings are same then they shouldn't be added . For example in first case 10°20'0"+20'0"=10°20'0". But whereas you have given 10°40'0". Pls do check it.
Thank you brother for the best explanation. I strongly believe that "you are a great civil engineer"
There are many videos out there on UA-cam but ur one was truly what I was finding for ❤❤❤✌✌✌✌
Sir apni khub valo vabe bojan akbar sunlai mone thake great sir
Sir aapke sarre video helpful hote hai and your voice 👌👍😍
Thanks I appreciate
@@civilengineerfbh277 😊
Phali baar kise na tareef ke 😊
@@civilengineerfbh277 hanji sir aap batate bahot achhe se hai mujhe classroom me sir batate hai to samjh nii aata but aapki video dekh leti hu to samjh me aa jata . .... So your video is to good and very helpful 👌👍
Thanks for uploading this video..,.
For the reading on vernier it clearly shows 5 minute exactly matching with main scale. We should judge from the main scale where our index is and judge from that what approximate seconds reading would be. Then look at that approximate seconds reading and you will find the matching line from vernier to main main scale. ( This is based on the figure used by the lecturer.) see the location on the index lying on between the minutes reading and you will find that it is at quarter distance away from the 20 minutes that is approximately 5 minute and see it is matching at 5 and 40 seconds and not 20. So total angle is 10 degree 25 minutes and 40 seconds not 10 degrees 40 minute. Has it been 40 minutes the index would exactly touch on main scale at 40 minutes. As you can see it is not so. The effort however is good.
Aap bilkul sahi explain kiye hai , thankyou .
Thank you 🙏🏻 so much sir 😊😊
Lot of thanks to you sir
Excellent...
Thank you for your valuable explanation and crystal clear concept conveyance. It really made the topic easy.
#KEEP UP THE GOOD WORK💐 😃🍫
Are ap to bhagvan hai college se zyada apke vidio dekhne me accha hai keep it up banate rahiye vidio and thank you 🙏
thanks sir tuition jane ke Zaroorat he nahi ghar mein padhai hoti because of you
thank you brother..very helpful video
Valo bujhiyechen
Very good information. Thank you sir
Thank you so much my doubt cleared
I was really helpful one day before exam
Sabhi topic clearly samj aa gaye sir ty u so much sir techeometery ka bhi vedio banana sir
Keep it More sir .
Nice videos .
Now I have no doubt in this topic .
Very nice i got it completely for first time
Ap bhat ache se samjhate hain. thanku sir
Montu Sandil thanks keep watching my videos
you have made a very nice video and good explanation
nice explanation of reading measurement from theodolite
Suberrb bhai 👮👑
Thank you for this
Excellent yrr
Very good explanation.... Nice
Good 👍
Thanks you so much...
It will suffice the work that a civil engineer would be doing in the field, so thanks for that. But, I would suggest that you should also explain the logical reasoning behind the method; that would probably be called a better explanation.
Very good sirji
This video was must needed
Do same type of video on prismatic compass scale
Thankyou it is very helpfulk
Lot's & lot's of tq sir.................
Thank you bhai ji
very nice video
Great
thanx you sirl
for such videosl
Sir mja aa gya
Thank you sir good work
Sir.... If d is the smallest value of the main scale and v the smallest value of the vernier scale, then the least count of the vernier is given by....(1) d-v (2) v-d (3) d/v
What is the right ans...and why....Please explain....Sir...
Thanks🙏
Thank you ...
Plz make a video on profile levelling sheet making sir
Thank you bhai
Super
Apka method kafi achha hai, agar apke pass hard copy hai to kya ap maile kar sakte hai.
Very nice video sir !!!
Thanks
Can u make video on how to take reading on vertical circle
Thank you sir
Helpful video sir
Nice video sir
How vernier scale division with 60 sir..
But sir. In horizontal angle there are two scale one is A and other is B.but you only told in scale A.not B
Sir Please explain by using instrument so it could understand more effectively..... further anything you explain by using the instrument at the site...
Mohit Kumar bro it is difficult because ur camera can not focus on the small divisions of scale. As the are hardly see by open eye
I think you are right sir...overall nice video..
Nice work sir g
Sir keep going ... Masha Allah wareh asal ...... And thode aur practicals perform kijiye naa....
Sir Jo aap na ya last Vala scale kaise kiya
Nice job
I am from nepal
Nice sir i also need it
Good work helpful content
Thanku
Thank you 🙏
Thank u
awesome video sirji
Nice sir..
Thank you & super sir
thanku sir this was very importent
a theodolite circle is divided into degrees .the degrees are divided into 2 equal parts. design a direct vernier and retrograde vernier to read upto 30 seconds? iska value kaise nikal na hei?
Thanks a lot.
Bhai kha se ho
Good sir keep it up 👍👍
Sir aap Kashmiri ho?? Any way nice..thanks
I can't understand the language huhuhu, I really need this one for my report in fundamentals of surveying......
Can u do it for prismatic compass
Good explanation
Thanks brah
Love you sir we always with you
Thanks
❤️
Thank you so much
Thanku sr
How to read the reading for vertical angle?
Thanks bro
Bhai kashur chukh shayad
achaa hai sir...
👍👍👍👍
🤩
Nice video
Thanks..sir...
I can understand sir
I think their is a mistake in the video , if minutes readings are same then they shouldn't be added . For example in first case 10°20'0"+20'0"=10°20'0".
But whereas you have given 10°40'0". Pls do check it.
Galat baat
Sir apaka vedio achh lga
Nice
Oh bhai division kaise pta chalta h
how to calculateformuler chang in h by using this
change in h=H+i-m
Language barrier tho, it's hard for me😭. This Online class is ********
your accent is similar to j&K peoples
I want a job for Land Surveyor.
Tu suryevor kyo nhi keha assi surveyor de student aa
Please provide english captions, asians and westeners cant understand what you are saying
Dhen Sumili oks
Y match ho rhi hna sir isme 🤔
Answer 10°8'00''