I know you boys don’t like chrome and shiny stainless. But ya must like leather. And Andy’s truck would look killer with a set of long horn buckets and matching console.
All I can think about after seeing your vision and it reminded me of them the movie cars from pixar with all them semis and thinking your truck is so Jersey shore Guido....aka the situation
@@moparman2500 looks like shit, at one time everyone had chromed out trucks and blacked out was cool. Now every swinging dick has a blacked out vehicle, including big rigs. Its looks like crap
@@moparman2500 lmao says the guy that likes to follow the crowd, you probably have the ass end of your vehicle squatting looking like a dog pinching off a turd. Blacked out is for ricers not big rigs.
Awesome awesome video Greg A, ol mark coming though on the paint once again, lol. Andy needs to get the Laramie and up tail lights now his still are the base model ones.
Headlight Revolution is the company Andy needs to get ahold of for a HID kit. They told me LED arnt as bright in projectors so a HID kit is where he needs to go with it. Mine are insanely bright. Highly recommend.
andy needs to get everything colormatched, find a bumper with the fog light cutouts and add them and paint match the front and rear bumpers! Would bring the rest of the truck together
Greg, did you adjust the lower adjuster on the new lights? The bottom bolt behind the grill goes through it. You screw it up and down before you tighten the bolt. It has been a while since I had mine out but I believe the lower adjuster controls the housing alignment in the fender, including the lower valance/gap filler.
I have the same issue on my truck and that bolt won't solve it because the mounting point for the left side of the light is still fixed too far from the fender (when looking head on at the front). So using that adjuster at best you are just twisting the light around that point e.g. you can bring the top left of the light out to the fender or the bottom left out but not both at the same time and doing so throws the gap for the other way off. You can get it a little better than he has playing with it and the top bolt (which has wiggle room), but still its way off compared to how flush the driver side is.
Mean lookin visor. I got one that is V shaped and points down in the middle on my W900L I drive. An 05 W900 with a Miller 75 ton Rotator. We have a second Rotator. 2016 peterbilt 389 with a miller 50 ton rotator. Real cool look it’ll make your Pete look MEAN! Love the black.
Looks like some ppl thi k all the paint work is overkill, but it's that extra step the takes a build to the next level in a big way! It can make such a difference! Great attention to detail!
Does Andys truck have a CP3 knock? My 2015 has a knock was told it was the CP3 and its normal? My 2012 didn't have this issue. Guy down the street from me has a 2014 his does the same thing?
You bought the 6nz bro ? I hope you got a smoking deal on it because it needs a rebuild and that’s 30k on a cat plus that head doesn’t appear to be a cat head that’s another good 5-8k 😬
If he does it himself and uses aftermarket parts it can be done for 10k with a new head. Did my acert, its was 10k. Now have cat or peterbilt do it and yes 30-40k
Sweet ride Andy. Dont pay any attention to your brother when he was knocking the vinyl floor. My 18 dually has it and i wouldnt have it any other way. Keep us posted on future upgrades.👍👍👍
Color matched looks like ass. Gotta have some chrome or stainless to break it up. Now some guys go waaaayyy overboard but greg goes waaaayyy overboard on color match.
@@glennrobichaux7490 nah, Chrome is cool if you're a 52 year old guy named randy. color matching done right is clean. i think he color matches perfect.
@@keith2860 well I'm nowhere near 52 and my name ain't randy. Big rigs get chrome. Blacked out is for teenage bros with ricers and trucks that look like a dog squatting to pinch off a turd
I miss seeing Andy in the videos. Gonna miss his truck too now, damn that thing is clean clean
Where’s Andy ?
You need to wire the mirror lights into the running lights circuit. It makes the cab lights look complete
Always paint the insides of the visors and chops trim black! Reduces glare and shine when driving. Love the videos big fan for a long time
Chevy guy at heart but love the ram 3/4ton and 1 ton single cabs
I agree with joe Hansen . Boost auto parts makes a plug and play system. I did it to my truck looks deadly 👌
I know you boys don’t like chrome and shiny stainless. But ya must like leather. And Andy’s truck would look killer with a set of long horn buckets and matching console.
Dogde front ends just have so much play and fit loose as a goose. Looks good from my house though
The piece that slides/clips on the headlights is bolted on with 2 bolts if I remember correctly and does have adjustment with those bolts.
You should have left the lights for the air cleaner chrome
All I can think about after seeing your vision and it reminded me of them the movie cars from pixar with all them semis and thinking your truck is so Jersey shore Guido....aka the situation
O wow a all black big rig that is so ORIGINAL and forward thinking. But hay it's your truck and channel. I will keep watching
Hey its not his fault that murdered out trucks are the coolest
@@moparman2500 looks like shit, at one time everyone had chromed out trucks and blacked out was cool. Now every swinging dick has a blacked out vehicle, including big rigs. Its looks like crap
@@glennrobichaux7490 i mean this is America and you are more than entitled to your wrong opinion
@@moparman2500 lmao says the guy that likes to follow the crowd, you probably have the ass end of your vehicle squatting looking like a dog pinching off a turd.
Blacked out is for ricers not big rigs.
andy should get the lights painted to match the root beer powdercoat
Can’t wait to see the all black rig get finished. Andy’s truck looks sick. Love the videos, keep it up man!
Awesome awesome video Greg A, ol mark coming though on the paint once again, lol. Andy needs to get the Laramie and up tail lights now his still are the base model ones.
Headlight Revolution is the company Andy needs to get ahold of for a HID kit. They told me LED arnt as bright in projectors so a HID kit is where he needs to go with it. Mine are insanely bright. Highly recommend.
That regular cab is badass!
We need more of the single cab! Keep up the great work
I’d love to see Andy do like a Laramie interior swap
theres a adjustment knob where that white sliding lock is to adjust them in and out to make them flush
I absolutely love Andy's truck
You should get a motel room together you freak
andy needs to get everything colormatched, find a bumper with the fog light cutouts and add them and paint match the front and rear bumpers! Would bring the rest of the truck together
Of you had'nt already drilled the window chops that would have been a perfect chance to go to 389 mirrors
Should have just done doors. Would have been much simpler if he had built a truck and ran it before doing this one and fully taking it apart
Andy should def find srt jeep seats or third gen art seats for his truck then it’d be bad ass
Greg, did you adjust the lower adjuster on the new lights? The bottom bolt behind the grill goes through it. You screw it up and down before you tighten the bolt. It has been a while since I had mine out but I believe the lower adjuster controls the housing alignment in the fender, including the lower valance/gap filler.
I have the same issue on my truck and that bolt won't solve it because the mounting point for the left side of the light is still fixed too far from the fender (when looking head on at the front). So using that adjuster at best you are just twisting the light around that point e.g. you can bring the top left of the light out to the fender or the bottom left out but not both at the same time and doing so throws the gap for the other way off. You can get it a little better than he has playing with it and the top bolt (which has wiggle room), but still its way off compared to how flush the driver side is.
Andy's single cab looks sick!! 🔥🔥
Definitely gonna need a low rider seat with that visor. I put a 12in visor on my Kdub and me being 6ft 4 I had to chop my seat down to see comfortably
1987 kenworth w900 with Canada badges,is that a nice truck? Do the badges make it rare? I don’t know much about these trucks
What kind of valve cover is on muscle man Andy savages truck? Looks real clean.
where is no boost
i cant remember his name
Hunt Gaming/Productions jesse
@@nastarchris a yes thnk u lol
i think he sold his truck
He's running through the wilderness somewhere doing CrossFit........ aka lost.
@@adamfranks4118 not surprised
Mean lookin visor. I got one that is V shaped and points down in the middle on my W900L I drive. An 05 W900 with a Miller 75 ton Rotator. We have a second Rotator. 2016 peterbilt 389 with a miller 50 ton rotator. Real cool look it’ll make your Pete look MEAN! Love the black.
Looks like some ppl thi k all the paint work is overkill, but it's that extra step the takes a build to the next level in a big way! It can make such a difference! Great attention to detail!
Truck looks killer. Even though I vote chrome bumpers
Now Andy just needs to paint the bumpers and grill.
Does Andys truck have a CP3 knock? My 2015 has a knock was told it was the CP3 and its normal? My 2012 didn't have this issue. Guy down the street from me has a 2014 his does the same thing?
Andy has a nice truck!👍🏽
Same headlights that are in my laramie longhorn
13:40 were is the air coming into the finder to feed the air filter?
Air comes In threw the mesh n down around the filter.
You need to paint the extended cab 1st gen that color
If Andy’s truck is a SEMA build gonna need to get on with that Bluetooth front driveshaft 😅
I think the grille bumper and mirrors need to be paint matched
Where did Andy get the weighted handle?
Andy shout take his front grill to mark get them painted.. that would like awesome
Lots up here northern Ontario Canada
Trucks and parts look good 👍
Assuming the Peterbuilt has a cat engine 👍
Andy truck lookin good
Blacked out Semi Truck 💕💕💕💕🤪
what are your thoughts on a second gen swap for a 4th gen?
You have that headlight gap because it's a FCA 😆
You should have known.
Its gonna look gragnster
How much HP?
Not a big fan of visors and side skirts, but whatever floats your boat...
I’ve never been this early whoa 😨
I have at least 10 big truck projects, as does everyone.
Were is no boost and Johnny sendit
What tires are on andy's trunk
You bought the 6nz bro ? I hope you got a smoking deal on it because it needs a rebuild and that’s 30k on a cat plus that head doesn’t appear to be a cat head that’s another good 5-8k 😬
If he does it himself and uses aftermarket parts it can be done for 10k with a new head. Did my acert, its was 10k.
Now have cat or peterbilt do it and yes 30-40k
Glenn Robichaux you never put aftermarket parts on a cat you just don’t do that cmon now.
@@dillongriggs4564 hell have better luck with aftermarket than cats reman bullshit.
I’m assuming you know the AlfaOBD software
Still wondering where u get them valve covers from??..............
D and j precision machine.
Whats your height on the clutch pedal?
Is Andy truck is lifted and how high it way to beautiful
I think it’s got a thuren 3” kit on the front
Or make sone art seats get newer leather front seats and have SRT. Put in then that’s phat and do the stitching 🧵 in root beer 🍺
Paint match the little things and roll pan that thing
Sweet ride Andy. Dont pay any attention to your brother when he was knocking the vinyl floor. My 18 dually has it and i wouldnt have it any other way. Keep us posted on future upgrades.👍👍👍
Is Andy 4’5”? His seat looks uncomfortable.
Anybody else agree he should turn it into a sled pulling semi
cut the whole passenger fender off is the fix
Where’s Johnny send it?!?
Here i am just trying to find all the parts to delete my 18. Getting harder to find.
Nice!! Lookin' good.... :-)
Upgrade the grill too
Looks good. But Needs to be lowered and on some 14 wides
send them to @B.rax12v for built headlights. He does a pretty good job on building headlights.
Sometimes I wonder why Greg stopped doing other channel shout outs? 🤷🏼♂️
GET A KUBOTA RTV X-1100C 4X4
Women like Chrome
The green truck has 13” breathers. You have 15” breathers
Work truck model........nah not for Andy hahahahaha dig the truck Andy
Greg major OCD moment lol
14:38 rest is just mombo jumbo crap
Send them to legendary gio on youtube he does some sick headlight work!!!
GREG YOU DONT PAINT CHROME HAHAHA
chrome dont get you home but makes you look good on the side of the road
thank god your getting rid of the chrome, truckers are mad tacky slapping chrome all over big trucks.
Color matched looks like ass. Gotta have some chrome or stainless to break it up. Now some guys go waaaayyy overboard but greg goes waaaayyy overboard on color match.
@@glennrobichaux7490 nah, Chrome is cool if you're a 52 year old guy named randy. color matching done right is clean. i think he color matches perfect.
@@keith2860 well I'm nowhere near 52 and my name ain't randy. Big rigs get chrome. Blacked out is for teenage bros with ricers and trucks that look like a dog squatting to pinch off a turd
ing
First 👌
So wrong big rigs should not be 100% black just so wrong
Ya eye brow looks sweat.
Where did andy get the shifter knob combo?
wondering the same