Thank you!!! I went to bed last night desperate for my non-cutting tufting gun. This morning I wathced your video and lo and behold - I'm back in business!
THANK YOU! THANK YOU! THANK you!!!!! I struggled on my last 2 rugs. I had to cut by hand in between runs. and then settle for cutting the entire rug with electric shears once I was done to get rid of imperfections of loops. You made my gun feel new again.🙏
Great to hear! We have a new version of this tutorial where we explain it a bit more even ua-cam.com/video/xkGrzPECfkM/v-deo.html In case you wanna check it out :)
اعلم انك لا تتحدثين العربيه ولكن اردت ان اشكرك بلغتي شكرا من القلب شكرا شكرا اسأل الله ان ينور قلبك بالاسلام لكي تدخلي الجنه معانا شكرا لقد ساعدتني كثيراً 😭❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤
I have the AK-1. My scissors open and close but it seems like they dont reach the yarn sometimes or only cut 1 out of the 2 strands of yarn. I just replaced my scissors so its not that. I am using cotton yarn (Sugar and Cream brand). Seems to work fun with the crappy acrylic yarn which isnt as dense. But not with the cotton, paper like yarn. Kind of frustrating. The primary job of the gun is to cut the yarn- feel like it should do that without adjustments
Hey Joseph, it should yes. It could be that it is to many threads through the machine. If the yarn is thicker, you can use 1 thread instead of two. Since the scissors are very small, the thicker yarn somethimes tends to slip out in the front of the scissors, leaving one strand uncut. Can you try with one thread and check if it is still inconsisten with the cutting? Otherwise we also do have a full scissors tutorial here: ua-cam.com/video/rxjCiZn6z7U/v-deo.html where we cover all the setting topics of the scissors we are aware of. If all this still is not solving your problem, feel free tosend me an email to help@tuftinglove.com with some pictures/videos of the situation, so i can have a look at it. best Jenni
Hi I'm Japanese.This video was very helpful. thank you very much!😭 Also, I have a question.The wool is tangled in the gear, and there is a little bit of wool that hasn't come off yet. Is there a way to remove the wool by removing the gear…?
A lot of patience and a needle or pointy scissors :) I know it sucks.... but that's still the easiest way. taking apart everything will cause much more pain, believe me :)
Hey Natalie, i don't know the ones that are not the original ones. I never had one, so i can't tell if it is working like that as well, but i guess it's worth a try :) Make sure to note/take picutres of the current state first, so in case it doesn't work you can go back to your current settings.
Hey Zara, like between the scissors and the needle? Or which parts? This can happen when the scissors don't cut properly anymore. But also the thickness and quality of the yarn have an impact on it.
@@craftinfinityandbeyond9023 That should not be the problem. The thinner the yarn the more threads you can thread. Would you maybe like to send me pictures of the yarn and the situation with the gun to help@tuftinglove.com? So i can see it, that makes it usually a bit easier :)
My problem is the scissors are coming out too far they cut just fine they’re in line but it’s just that they nip the tufting cloth every once in a while and then I have thread from the cloth in with the yarn or it makes a hole
Hello. Do you have any ideas why the scissors wouldn’t close all the way even after adjusting? Also, I confirmed nothing was broken. They were working fine but now won’t cut sometimes
@@Tuftinglove thank you for the reply. If I haven’t adjusted the pile height and this suddenly started happening, would you advise I adjust the pile height and try adjusting the scissors until fully closing?
Hey Teona, sorry for the late response. We somehow missed your comment. The wrenches have the following sizes: 3.9 mm big 3 mm middle 2.38 mm small The distance between two parallel sides. We will bring them as spareparts to the shop next week. Have a great weekend Jenni
Hey, this video is not for the scissors opener, it's for the scissors closer. A Video on the scissors opener will follow soon. But usually when the scissors are not opening the scissors opener is broken. You can find it in our shop in the spaceports section.
Hi, what if my scissors aren’t even opening? I haven’t changed anything in the gun since I purchased it (which is just a month ago and haven’t used it much )
Thank you!!! I went to bed last night desperate for my non-cutting tufting gun. This morning I wathced your video and lo and behold - I'm back in business!
I am so greatful for your video, it helped me a lot🥰 Thank you 😍
...lost sleep last night about my tufting gun not cutting....THIS HELPED SOOO MUCH!! THIS IS EXACTLY WHAT WAS WRONG 😅
THANK YOU! THANK YOU! THANK you!!!!! I struggled on my last 2 rugs. I had to cut by hand in between runs. and then settle for cutting the entire rug with electric shears once I was done to get rid of imperfections of loops. You made my gun feel new again.🙏
Great to hear! We have a new version of this tutorial where we explain it a bit more even ua-cam.com/video/xkGrzPECfkM/v-deo.html In case you wanna check it out :)
اعلم انك لا تتحدثين العربيه ولكن اردت ان اشكرك بلغتي شكرا من القلب شكرا شكرا اسأل الله ان ينور قلبك بالاسلام لكي تدخلي الجنه معانا شكرا لقد ساعدتني كثيراً 😭❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤
Ty worked for me just spin the wheel slightly to adjust scissors forward tighten back screw
Thank you!!!! ♥
Las Tijeras De Mi Pistola Se Quedan Afuera😢, Que Debo Hacer
Thank you 😭🩵🩵🩵🩵🩵🩵🩵🩵
THANK YOU!!!!!!!!!🤩🤩🤩
thank you
Now my scissors are closed an it’s not opening or closing?
Thank your so much ❤️❤️❤️❤️
I was my girlfriends hero, the tufting gun wasnt cutting the string anymore and i noticed she was cutting it by hand with scissors. Hah thank you
For some reason when I try to use the Alan key on the black bolt it won’t unscrew I tried all my strength I don’t know what to do
Sometimes the screws get super stuck. try to put a bit of oil/Lubricant on the screw and you're usually able to unscrew it.
Thank you so much!!
I have the AK-1. My scissors open and close but it seems like they dont reach the yarn sometimes or only cut 1 out of the 2 strands of yarn. I just replaced my scissors so its not that. I am using cotton yarn (Sugar and Cream brand). Seems to work fun with the crappy acrylic yarn which isnt as dense. But not with the cotton, paper like yarn. Kind of frustrating. The primary job of the gun is to cut the yarn- feel like it should do that without adjustments
Hey Joseph,
it should yes. It could be that it is to many threads through the machine. If the yarn is thicker, you can use 1 thread instead of two. Since the scissors are very small, the thicker yarn somethimes tends to slip out in the front of the scissors, leaving one strand uncut. Can you try with one thread and check if it is still inconsisten with the cutting?
Otherwise we also do have a full scissors tutorial here: ua-cam.com/video/rxjCiZn6z7U/v-deo.html where we cover all the setting topics of the scissors we are aware of.
If all this still is not solving your problem, feel free tosend me an email to help@tuftinglove.com with some pictures/videos of the situation, so i can have a look at it.
best
Jenni
thx u so much!!
Hi I'm Japanese.This video was very helpful. thank you very much!😭
Also, I have a question.The wool is tangled in the gear, and there is a little bit of wool that hasn't come off yet. Is there a way to remove the wool by removing the gear…?
A lot of patience and a needle or pointy scissors :) I know it sucks.... but that's still the easiest way. taking apart everything will cause much more pain, believe me :)
@@Tuftinglove Thank you for letting me know. oh....I was trying to take that apart tonight😂😭
I will try again as advised...!
What do I do if my screw is not loosening ?
I try same way but still my scissor is not closing or opening I don’t know what to do I just got this machine
Hey, you might wanna check out our newer and more detailed tutorial here: ua-cam.com/video/jJeub2LOalw/v-deo.html
hello were you able to i have the same problem
Great video!! Will this also work with the tufting gun with the orange trigger?
Hey Natalie, i don't know the ones that are not the original ones. I never had one, so i can't tell if it is working like that as well, but i guess it's worth a try :) Make sure to note/take picutres of the current state first, so in case it doesn't work you can go back to your current settings.
My yarn keeps getting stuck inbetween the scissors and the metal runner part where the scissors are held, do you know why that could be?
Hey Zara,
like between the scissors and the needle? Or which parts?
This can happen when the scissors don't cut properly anymore. But also the thickness and quality of the yarn have an impact on it.
@@Tuftinglove yeah the needle and the scissors. Oh ok, I have out three strands in as my yarn is quite thin, so do you think I need thicker yarn?
@@craftinfinityandbeyond9023 That should not be the problem. The thinner the yarn the more threads you can thread. Would you maybe like to send me pictures of the yarn and the situation with the gun to help@tuftinglove.com? So i can see it, that makes it usually a bit easier :)
what do i do if my scissors are opening and closing but still not cutting properly
It might be the yarn or they are not sharp enough anymore. Replace the scissors with spare ones or let them sharpen.
My problem is the scissors are coming out too far they cut just fine they’re in line but it’s just that they nip the tufting cloth every once in a while and then I have thread from the cloth in with the yarn or it makes a hole
Hey Crystal, kinda hard to tell from here. Feel free to send me pictures/videos of the situation to help@tuftinglove.com
Did you end up solving this issue? Mine is doing the same thing
@@studiopenniloumaybe you solve the problem? 😢 my gun do that too and its ruin my whole work :(
Hello. Do you have any ideas why the scissors wouldn’t close all the way even after adjusting? Also, I confirmed nothing was broken. They were working fine but now won’t cut sometimes
If you go on a too high or too low pileheight setting the machine will not be adjustable to your needs. make sure you are within the given range
@@Tuftinglove thank you for the reply. If I haven’t adjusted the pile height and this suddenly started happening, would you advise I adjust the pile height and try adjusting the scissors until fully closing?
I have a green cut pile/ loop pile and the scissors won’t close
Hey Mya, we don't have any tutorials for the green one yet, I'm sorry i can't help you yet. KRD-I tutorials will be online in 1-2 weeks.
Help! What happens if my scissors are not opening wide enough???
Hm, my guess would be the scissors opener. Maybe it's broken or flattened down. or the scissors need some oil on the joint, to open smoother.
Do you know the size of that Allen wrench? Bc I have a tool with several sizes, one actually fits, but none is making it turn to loosen, plz help! :)
Hey Teona, sorry for the late response. We somehow missed your comment.
The wrenches have the following sizes:
3.9 mm big
3 mm middle
2.38 mm small
The distance between two parallel sides.
We will bring them as spareparts to the shop next week.
Have a great weekend
Jenni
Even though i tried it, i scissors didn’t open. how could i do ? Help me🥲
Hey, this video is not for the scissors opener, it's for the scissors closer. A Video on the scissors opener will follow soon. But usually when the scissors are not opening the scissors opener is broken. You can find it in our shop in the spaceports section.
That screw on the side is stuck for me I tried with all my force and won't unscrew
If you really can't unscrew, we do sell the mechanism a whole here : www.tuftinglove.com/Scissorscloser-set
Did it end up unscrewing? Mine won’t loosen either
what do i do if the scissors won’t open
Your scissors opener might be broken. You can find it in the shop here: www.tuftinglove.com/Scissor-opener-for-AK1-and-NK1
Hi, what if my scissors aren’t even opening? I haven’t changed anything in the gun since I purchased it (which is just a month ago and haven’t used it much )
This sounds like your scissors opener is broken. You can find it in our spaceports section in the shop