Halo Projector Headlight Install on 2006-2012 Mitsubishi 4G Eclipse
Вставка
- Опубліковано 6 вер 2024
- This is a video to help you install your new Halo Projector Headlights
*these will work on all 2006-2008 model years. they will only work on factory Halogen 09+
If you are installing HID's in this headlight you MUST do a DRL delete, video on how to to do that is here : • Daytime Running Light ...
Want these headlights? get them here! www.autocityimp...
Have any questions? Email me at Willisjason87@yahoo.com
My brother is doing this exact setup on his 06 Eclipse. I must say that this video explains everything to do on the wiring 100%. Thanks for the video Jason Wills.
It covid quarentine time. I bought a manual 2006 Eclipse GT in mint condition...
This has been my quarenteen project. Its frost white and I been blacking it out for days...
My headlights and tail lights arrived today. And these two videos are just awesome...
Thanks you've saved me probably 2 to 3 hours worth of fiddling, frustration, and troubleshooting..
glad you enjoyed!
I just paid $100+ labor on replacing 1 light. I didnt know it was that easy 😞. Thanks for this video bro!
I'm so glad this video was created. I have an '07 and I bought those same hid's before seeing this video. Was always in my intentions to do it on my own, so I figured what would be the steps to doing this. I literally just have to do exactly what you did and I will be set. Haha, I really appreciate it.
Johnny hey im looking at the same lights. 4 years later they work fine?
I did this installation a few years ago and let me tell you, it would be *a lot* easier to take the wheels off.
Have a question. So when it comes to installing the halos, on the driver side, the ground wire goes the to the green wire with the red tracer and the for the the white wire goes to the green wire and orange tracer which is the accessory mode correct?
He said that in the video
if your saying you only want the halos on and not the turn signals you can do that by running the "hot" wire for them into the cabin and hook them to a switch that you can install inside the cabin. your in-cabin fuse box has two 30amp fuses that are both constant power that you can plug an add-a-tap into and run the power for the halos to the switch from there. i hope that helps.
they will work on any model that has these headlights, in 2009+ they added the bi xenon headlights as an optional accessory, if you have those headlights the wiring is completely different but if you have the same stock headlights as shown in this video they will work with the same installation!
Do you have a tutorial for the xenon headlights?
how do i undo the wiring though, i bought an eclipse that has these headlights but the lights are destroyed and i wanna buy whole new ones but i don’t know how to undo the wiring out of the blinker harness because the people that owned it last put a hid ballast in there
I just want to say thank you!
I installed my JDM Halos yesterday.
Removing the bumper was a bitch tho, but I got it done and got all of my lights working.
I wll be installing my LED Tail lights now.
again thanks for this video!!!
i totaly hate the way new headlights are mouted such a pain in the ass to remove them. old eclipse had it perfect.
What is the other function that you did not connect?
i believe i answered the first question above, the DRL delete is strictly for HID installs, if you do not plan to do a HID kit then the DRL delete is not necessary, but in the future if you do switch over to HID make sure you do the delete!
You lose me soon as you wire the halos...the blinker wire slides into the outside of the clamp but then the other wire touches no other wire inside the clamp?? Im so confused. Wish i could see better
Jarrod McMillian agreed
Hi Jason, yes, I did a DRL delete and it is working now. I have also added in relays so that the halos and LEDs are powered directly from the battery instead of the middle wire. Thanks for your help.
thanks.
do you have a video of how to install aftermarket fog lights on the ecllipse ?
I installed both as instructed and my passenger side two LEDs and top light are not on. Any help is appreciated
this isn't an HID kit, but the bulbs for these headlight are H1, so if you buy an HID kit for this headlight you will want a H1 kit
yeah they defiantly could, although this video was made so you wouldn't have to spend the money on it! I understand if your don't feel comfortable though and you should have no issue having a shop do this, if you hold off were going to be offering some new and exciting features for the headlights very soon!
Thanks for this video, was looking at how to do this on my Outlander but a Lancer is close enough lol.
Really great video!
This isn't a Lancer
So I have a 2011 with factory HID I got the halos work but my connectors are completely different ... wat do I have to do to be able to run HEadlights
Same here, how did you end up wiring it to work properly?
the wiring harness on the headlight side splits the high and low beam hot wires to two separate light housings. therefore giving you two separate lights!
this is because you have no done a DRL delete, a DRL delete is mandatory with HID installation. I have posted a link in the description to the DRL delete video
on the ones in this video i took the fog housings out and used a rotozip to make the hole bigger to fit the new fog lights. i also custom fabbed so brackets to make them bolt into where the factory ones screw into.
you may have a bad ballast, or connection, as well as a bad battery. check ohms and volts with volt meter
in the video i state that you can hook those up the same way we hooked the rest up but this car was getting eyelids installed which cover those bulbs anyway.
the projectors do give off less light that the stock housing but you may have to adjust your beams using the Phillips head bolts on the top and side
yeah if you want them to come on with accessory mode like the halos then hook the up just like the halos or splice them inline with the halos!
Hey men, i just install my headligths on my 2007 eclipse, thank you very much for the video, now im trying to install the tail ligths and for some reason i cannot catch up the name of the "LED" connector you said i have to use in order to not have a problem later, i'll apreciated that info, once again thank you very much, you're a genious !!!!
I know this came out a while ago but I just changed mine. Thanks for the video.
Finna change mine now....they made the new models a pain in the ass to change
How did you get the low beams to stay on when high beams are on?
I have an 09 with xenon headlights how do I wire the halo headlights to this car
Zeb Hollier this one is the factory hid right?
well for my build I'm glad I'm starting with this company. 🤣🤣 this guy convinced me for sure
you probably didn't listen to the entire video, in the video we stated that we skipped that step because the wiring is exactly the same and eyelids cover them anyway so no need to hook them up in this particular case
this video is awesome and helps alot, but.....I have a 2009 gt with factory hids, which wires would I splice instead. or should I just not bother trying lol
I got a 2009 gt with factory HIDs too. Both of my headlights just went out and each headlight is 100 dollars. Fuck HIDs. I just want to convert them to regular halogen but I've been looking it up and it seems you can't on factory HIDs. Did you just replace your HIDs with more HIDs?
What were the things you used to connect the wires?? it looked so easy I always cut and solder my wires and its a pain but I wanna use does things lot less mess for when I install the headlights
I didn't know what they were too, but I heard him say faintly "butt connectors" so I looked them up and sure enough that's what they're actually called. Look them up if you're still interested
@@ahmedaj2000 6 years later lol but thank you anyway
hey man i just bought some of these the gloss back.
its looks good but the halo ring is really dim could that be because you guys just change manufacturer ?
Great video, attention to detail 10/10 I'll be using this next week
Metal brackets around the lamps and bumper! You dont have to take the bumper off! Good luck! 3 hours for me and my buddy to replace the 2!
Anyone remember the 99-04 mustang headlights? You had 2 clips to pull and the whole housing comes out. You could literally do the whole swap with no tools and about 45 seconds per headlight if you take your time.
You should do a video on how to install fog lights for this car.......i just got some from auto city imports but dont know what to install them
Quick question on the halo projectors headlights.. if i order them with the blue halo rings and the red demon eye, will they still be considered street legal? I'm still not completely sure how these lights work lol
i would recommend calling your local office for local street laws. Most of the time blue and red are illegal because those are emergency colors, but you can always hook them to a switch inside the cabin to have control of when they are on or off
Do these headlights come with the LED in them or do i have to buy them separately?
they come with the small LEDs in the top and the H! halogens for low and high beam
almost ready on the colored halos and demon eyes, the colors offered are going to be pink, purple, blue, red, green, orange, and yellow
i would to voltage tests on your wires, although it is possible that the halos are not function its more than likely and installation error, check your grounds as well as your leads, even fuses to make sure you didnt pop one.
none of the 4g's in these videos have lower grills.... mine does not either.... not sure what you're seeing but they do not come factory with lower grilles. those are aftermarket if they have them
The headlight kit comes with bulbs. Most people like the black housing projectors.
if you want the LED's to work when in accessory mode (same as halos) connect them the same way as the halo's as shown :)
so you hook the LED wire to the accuracy wire right or can I hook to the halo wire?
Hello I have a few questions. So the led bar has a white wire and a black wire, the halos are the same, but the two led bulbs have a white wire with a black tracer and a black wire. Do I connect the white wire with black tracer to the same wire that I connect the other two white wires to? Also, if I connect all three wires to the green wire with red tracer, there won't be any pressure since I'm connecting three lights to a wire that is designed only for the blinker?
Good video I want to personally thank you for making this video!
Much Appreciated man!
Thanks for the video. Any reason why my passenger side halos and led lights aren't coming on (green wire with white tracer is what im using) ?
I know its not the headlamp itself cause i connected and tested them by connecting it to the blinker wire instead as well and it flashes for everything.
Hey I have a 2011 Mitsubishi eclipse GS sport purchased the whole headlight assembly it has factory HID can I still use the ones I have and just bypass the ballast
I need to change headlights assembly on the 2004 Mitsubishi endeavor, is it's the same process? Don't want to change wire, just headlights assembly cause they are so faded.
Hey Jason, quick question, you know this car has a switch on the e-brake that activates the automatic daylights, are this still going to work the same? with the same connection set up u showed in the video?
Where On the ebrake?
What type of bulb are the 2 small bulbs on the top mine went out and I need to replace them
same way you connect the halos if you want them on at the same time, i state this in the video :)
Really late here. In my 2007 the wires are green and white and green and yellow. Use the green and white.
as stated in the video and in previous comments here, you hook them up the same way as the halo's
if you have factory housing that came with projector lense and HID's they are not the correct bulbs, the aftermarket projectors use H1 bulbs and the stock HID's are H13 bulbs, also the wiring is completely different for 2009+ with stock HID upgrades. you can still install these but this video will not help you with the wiring :(
Is there any wiring explanation for people with factory projectors? Thanks
Where can we find replacements for the actual halo rings when they burn out or if I want a different color halo ring??? Is it possible to get rings where you can control the color?
yes sir they are from the same site and no, those fog lights come with their own switch and relays.
Hey Jason I have same year of car and I have same projector lights and the problem I'm having Is one bulb doesn't turn on sometimes it's almost like the car has to warm up then they work ??
My headlights came in with only 4 vampire clips, but I wanna hook up the LED strip and the 2 single LED bulbs too, I'm assuming just cutting one of the wires in the middle, then connecting the other two and putting a cap and electric tape, and then wiring that main wire into the vampire clip with the turning indicator light will do it?
Yes just go to an auto part store and pick up another pack of those clips and hook the up as stated in the video. Tie them in the same way. No cutting if wires needed
Someone had these installed on my 4g when I got it but the lights stay on the whole time and they don't shut off even when I try to turn them off. Is that normal?
The removal of the bumper and stock headlight should be exactly the same, in 2009 they started having the option of stock projectors which came wit ha different wiring harness which make my the wiring part of the process different, if you do not have the projector option in your 2009 the installation should be the same.
Jason Willis Hey man, I really appreciate the video! I used your other video as well to install my rear lights and it was perfect! I ran into the different wiring harness problem with the fronts though and had to backtrack (reinstall the stock lights) :/. The new halo lights have a 3-prong harness (as in your video), but the Eclipse wiring harness was black with 5-prongs... what am I supposed to do in this situation?? Thanks!
Hey Jason, so I've had these headlights for about 5 months and the low beam on the right side decided to burn/short out. My question is if I need to buy a whole new light, or if there is a replacement bulb
just have to buy a new bulb. they are H1 size :)
+Jason Willis (AutoCity Jason) thank you so much
+Jason Willis (AutoCity Jason) one more thing; how does the actual bulb disconnect? Do you just pull it out, or twist it?
+Austin Schrudder there is a pressure clip you unclip then just pull out!
+Jason Willis (AutoCity Jason) I just got it out, thanks for the help!
What bulbs do we use to replace the low beam and high beam? I wanted these to toss in some H13 LED's. But I'm guessing since its a separate low and high beam its no longer H13 bulbs.
Great video!
Anthony Intelisano h1 bulbs:)
Jason Willis Thank you sir, appreciate it
i just got mine. am i gonna have to vampire clip everything to the blinker wires to make the led stuff work as well?
currently installing now...quick question for you is there a rubber sleeve for the headlight in between the hood and the headlight (for rain etc.)??? that u need and if not any problems because of the rubber sleeve not there??
Jason, I installed the halo headlights and only hooked up the halos... now if I wish to hook up the rest, can I just splice the halo ground wire and the white wire of the halos to hook up the LEDS and the strip? Thank you
Jason, did u buy the fog lights on the same website u bought the headlights? and do u use the same wires that are used to make the original fog lights work? Thank u
Hi Jason, I have a 2008 eclipse and I am about to place an order for these halo headlights. I watched your video and I never saw you install bulbs into the aftermarket headlights, were they included or did you install before making the video? Thanks
Hey man, firstly, how or do you have to replace the bulbs in the aftermarket high and low beams? Secondly, if you want the LED lights and strip to work, do you splice them into the same wire as you do for the halos? Lastly, do I need to turn off the day time running lights in the ECU like you did in your other video before I do all this? Thank you sir!
what are those red things he used to connect the headlights to the car ? anyone knows what i need exalty for my 2006 eclipes gs?
you can do a DRL delete to get rid of that, i show you how to do that in a different video :) these should still work the same way though
Is there any way to fit in xenon factory modal I had an accident and the xenon from the mitsubishi factory are so much expensive
I see that you updated the video description to make it that it works only for 2006-2008. Do you know if they would work on a 2011 gs sport and could you send me a link to the instructions if they work for my year?
Is the black housing illegal to have on your vehicle in Pennsylvania
Hi Jason, I purchased the replacement headlights with the HID-kit as well. Everything works great until the engine is cranked on. If I turn off the headlights just to show the halo, the headlight and halo flickers. I used to have an HID kit with my stock headlight assembly and there were no problems. So, in the meantime, until a solution is out there, I won't be showing off those halos on its own. Would you happen to know how to fix this??
Thanks.
so i notice you didnt turn on the car. I want my lights to be ONLY halos while the car is on but i wanna know if you can wire them so that the running lights are halos ONLY instead of the lights being on with the halos as well. HELP
When you have to replace the bulbs on these, what is needed to do that?
got my halos installed Jason lights look awesome Thanks ..
looks really nice man, one question, can i use my hid xenon lights in this headlight assembly?
What are the fog light halos connected to for power? ACC?
Do you have a tutorial for fogs? O liked yours... where did you buy it?
new bulbs are included in the headlight purchase :)
One question.. Where did you get your eyelids? I'm trying to get some black ones for my 07 Eclipse
I wanted to remove the headlights on my gt an black them out from the inside.. Seems like alota work...
I drive an '07 GT, am I correct in believing that if I buy the lights from your site I won't need anything else and they'll be installable by myself the day they arrive?
jotted down notes and will be intalling my halos to my 95 eclipse.. are the wires same color as this eclipse??
I bought it a month ago and finally gets here last week. I installed it becasue the driver side halo ring and the LED light doesnt work. I following every step you did in the vedio. The passager side works totally fine. So I dont know what wenrt wrong. Also, How do you connect the doemon eyes? I assmuse the red and red/black wire is for the demon eye. Where do you connect to to make it work? Please Let me know. I want my head light to work!
did you get your demon eyes hooked up?? i’m doing mine now and i have no idea how to wire them in
what you have on ur fog light? or did u remplace it for another ones ? looks cool
So the other two wires hook to the same wires
Jason, are the hid bulb sizes different from the stock headlight, from the aftermarket?
Hey I need help on mine. My Drivers side halos/headlights work great but as for my passengers side they're a different story.
I hooked up the wires correctly (Black to Black) and (White To Green/White) and only the main bulb comes on and not the halos at all....Can you try to trouble shoot the problem? could it be that i just need new halo rings? Plus these are BRAND NEW
I have another question buddy. Did ur 4g come with the bottom grill when u bought it ? Bcus I got mine used, and it doesnt hav the bottom grill, just curious. Thank you.
Sorry if a little a little late. Recently installed these headlights into my eclipse and the first night after installation everything worked perfect. The following day, the halos on both headlights stopped working but both interior bulbs still run fine. Wiring was done correctly after rechecking and fuses were recently replaced just to be safe. Wondering if someone knows a cause/solution to this situation? Is it possible the inverter box connected to the halos went bad after initial connection?
Same thing happened with me except my right side never actually worked only turned on for a second then off along with my left shutting off a day after and I still cannot figure out how to fix it
Do the wires come with the headlights as well when you purchase them??
i am trying to install my new headlights now, but there are some wires on here that weren’t in your video. i’m not sure what the wires are for
If you ordered custom headlights with demon eyes those wires would be extra wires that you would hook to a switch in the cabin
i have a ?.i got this lights in my 2006 eclipse but wen i drive at night the lights dont light the road it looks like im driving with my lights off but there on.is it the Projector?
Idk what kind of 4G you have. But my bumper isn’t a pop and pull....
did you do a drl delete? Also HID's do take a few moments to warm up. thats normal operation. a minute at most.