Dude as per AWS D1.1 u need to set the height of the reference reflector between 40% to 60% screen height for an angle beam testing and that for a Zero degree inspection for the lamination chech should be between 50% to 70% screen height..Bcz based on the procedure you will be adding a very high gains above the reference gain and hence for an angle beam testing with AWS procedure its better to peak the reflector signal between 40% to 60% screen height in order to avoid signal saturation due to a very high scanning gain
Not exact some clients ask to set 80 % SH for angle beam inspection then should be add minimum 14 dB of the yours reference dB level and it's dependence up one the matal path value..
Dude as per AWS D1.1 u need to set the height of the reference reflector between 40% to 60% screen height for an angle beam testing and that for a Zero degree inspection for the lamination chech should be between 50% to 70% screen height..Bcz based on the procedure you will be adding a very high gains above the reference gain and hence for an angle beam testing with AWS procedure its better to peak the reflector signal between 40% to 60% screen height in order to avoid signal saturation due to a very high scanning gain
Not exact some clients ask to set 80 % SH for angle beam inspection then should be add minimum 14 dB of the yours reference dB level and it's dependence up one the matal path value..
Do you do this for a living?
please the position of hole in the calibration v1??? , merci
Hello, I have a few questions regarding this device. Would you be able to assist? Thanks
2.25 transducer.....