hot tip on the canister, if its the same diameter as mine then it should fit in bottle cage. I keep 2 cages zip tied to my feedback stand and use one to hold the canister. works really well to reach both wheels and have one central place to pump so its not rolling all over the floor. other bottle cage is for a half bottle to hold tools.
I'm all about a left pull on the seat tube, and a right pull on the down tube, with a half frame bag for tools and lunch (burrito and/or PB&Js and bananas), and a feedbag for quick power snacks.
I....KNEW....I'd learn something!! My struggles with cardboard box opening are now over! Turns out I've been using the wrong tool for the job all these years! Thanks DK! :)
For your rear brake problem, when you pressed the calipers in, make sure not to squeeze the brake levers until the rear wheel gets put back on. That may have caused you to get air in the line the first time. I've done this plenty of times. Now when I take off a wheel, i always put those disk brake bleed blocks.
I run the bottle cage pump mount as well after breaking a rib with the pump in my jersey pocket. I buy them on Amazon and they mount behind the cage. Love em
Came across Hutcheson tires last year. Took a chance on them (700x35 for a converted hybrid-now-gravel ride), am very happy. Awesome video as usual... folks sending ya product and not sponsoring, they missed that part of the contract I sent them after the last video 😝
Ugh I know the feeling! I cleaned and lubed my sticky piston and somehow contaminated my brake pads and now I'm on my third time taking them off the calipers to clean them. This time I'm going to torch them muahaha!
i have broken enough small pumps to realize most of my pumps fit in all of the different mounts that i have put "under" and beside the cages. I swap pumps with impunity. However, some have an added velcro strap which is reassuring for the bumps. I am interested to hear how the bottle retention is on your side cages.
So damn hilarious 🤣 and love frame bags. Yes side mount bottle cage is a must with them. I ride like I’ll have a to do a full rebuild/will encounter the apocalypse every time I go out. So my daily tool kit is massive and fills a lot of the frame bag.
DK, those Hutchinson's look nice; still enjoying? Re: tubeless 1st seating. Not sure if tried, but a nice hack is to use an old valve core with 'valve' part of it snapped out to allow air to flow into the tyre far more easily. Can't guarantee seating with a pocket pump - but does make setting up with a track pump far less of a pump your arse off and sacrifice your eldest to the gods type event. Entertaining and really well put together vid, much appreciated over here 👍
I am always looking forward for your great video! I started hating handing dot 5.1 fluids, as it is super nasty/toxic/environmentally damaging...so I switched to GRX! Bleeding is easy and better braking power!
Yo Dustin this is wild. I've been looking for a used Park Tool INF-2 and an air compressor because my Joe Blow won't cut it for tubeless. Might have to get a TubiBooster now! Also I did the same thing with some SRAM Rival disc brakes today, cleaned and checked the pistons. Make sure you push them both in fully with a plastic tire lever and possibly open your pads a bit with a packing pad protector before putting the wheel back on.
So the Tubi is about getting the air into the tire fast so it seats? I’m unclear on that. (but I also only have one bike with tubeless and my friend owns a bike shop so I’ve always had him set them up - he obviously has a compressor.)
@@EverythingsBeenDone You ride long rides without much stopping, usually some number of bottles (more than one) with you, right? Consider a camelbag in the (properly larger) frame bag?
I also ride with the pump on the bottle cage mount. At least topeak's mount fits on the non-driveside so for pictures it's obstructed by the downtube. Also topeak sells just the mount itself but it's at criminal prices.
@@EverythingsBeenDone hey DK. It's never giggled out ever not even on gravel. The mount has a rubber band that stretches over the pump that's handle side down to keep it in place. Topeak Racerocket pump.
Not putting the pistons back after 2000 miles it was brutal getting it back. After 3 days i eventually got the pistons to retract. When i do this i also clean the pistons before i retract them, and i also put oil on the pistons. Some people use a kind of silicon. Worked well for me, so i do retract the pistons (push them back) more often. Because...I am avoiding the dreaded brake bleed. Never done it, good on you :-). Not looking forward to that. I can't wait to open my next box using your technique. I am putting in a new saw blade right now. I have a saddle coming later this week. Or i could wait for a box of tires coming. I think that cannister you got could make a mean espresso - Large.
@@EverythingsBeenDone i forgot to use the saw. i was so excited to get my saddle and put it on, then one of the saddle bolts disappeared took me 2 elapsed hours to find it lol. I think i have another package coming, i'll have to hang my saw up over the mailbox. Have you ever used a dremel to open a box. Hmmmm, what fitting to use, so many. Sandpaper, metal sharpener, glass polisher...
Looking forward to the 6mo update on the biodegradable bottle. Any thoughts on if prolonged water/sports drink exposer will cause a shorter lifespan on the bottle?
New tire days is always great. I had mines like two weeks ago & loving how better my gravel bike rolls on the road & on the trail! What was the red bike with the ritchey tires in the background?
Had that brake problem on my mtb recently. First disc brakes I had so I tried to replace the pads by myself. Ended up with a cracked pistom and leaking brakes after pushing the pistons in. Conclusion: new brake on the front and new set of pads since i contaminated the other set 💩
Gah hate Sram hydraulic bleeding. Shimano is for the peepo. Also same experience with HUTCH tires, easiest tubeless setup! I have a air booster also Sucks to pump it up to pressure plus gotta do it for each tire!
Hey Dust, later in some next "episode" (sounds funny), can you give us more feedback how the Hutchinson toureq are holding. I'm more intereste to know in the rolling resistance those time when you hit the pave roads compare to the gravelking SK.
3 bikes? all out of service? sounds familiar, until I got a vintage mtb. Trust me, you need one. And guess what, they are cheap so you need no sponsors for one. You could draw the whole steel frame like I did, with a sharper. For the fire roads you ride and 650b wheels you ride, not sure you will notice the difference. Greetings from the Basque Country!
Awesomely entertaining content as always bud. Ps I run a Topeak Racerocket HP Bicycle Pump as well. Perhaps you can find a friend with a 3d printer to whip you up some more mounts? its an easy enough design. Just a thought. :)
🤣 SRAM brake bleed and blind optimism 🤣 easiest tubeless setup, there's not sealant everywhere, I'm not swearing or sweating 🤣 that's just some funny shit, great episode!
I always thought that toureg was a bastardisation of Tuareg, a subset of the nomadic group of Muslim Berbers of the Saharan fringe. That one is even harder to pronounce...
Wait, wait -- how do you lock rear derailleur in down position? Is this a model with some kind of lock built it in or do you put invisible screwdriver and I missed that? :-)
For keeping track of bike maintenance, check out the Feedback Sports app. Add your bikes, link them in the app to your Strava, and you can set date/mileage reminders
Hey Dustin ! This video is out just when i needed it ! My question is, when you will have ridden the 700x45c enough - which do you prefer between 700x45 and 650bx45ish ? Is 700 enjoyable or does it feel like a truck ? Or the 650b is just more playful and enjoyable ? I am currently riding 650b wheels that came with my Nukeproof Digger and am looking to upgrade to a lighter wheelset but cannot decide which size is better. Thank you and keep up the good work ! Cheers from France :-)
Hi, great, no excellents videos, have it all as a good movie 🤣, taking your words in a pasar video, I would like to make you a question about a doubt that I have about gravel bikes sizes. I have over 20 years riding bikes, I am 1,73 mts tall and I usually use size 54 in route bikes and size M in mtb, recently I bought a a Niner RLT 9 size 53 but I found it big for me, I supouse that is for the kind of bike because according the size chart is the right, so is normal than you feel a gravel Bike bigger? Please I really appreciate your recomendation thanks
I think it’s pronounced “twa-reg”. Historically en.wikipedia.org/wiki/Tuareg_people Though Hutchinson’s spelling is too similar to a lardy suv from VW.
Sorry for splitting hairs, Dustin, but I think of this every time you mention it: when companies send you free things to keep in exchange for mentioning them on your videos, that's pretty much the same thing as 'sponsoring' you.
idk how i got here but i keep coming back
Pin worthy!!
Congratulations to 35k one million is right around the corner 💪
Much respect Mateo, Couldn't have done it with out you!
Ah my favorite mechanic, let the chaos ensue!
Hahahahaha
hot tip on the canister, if its the same diameter as mine then it should fit in bottle cage. I keep 2 cages zip tied to my feedback stand and use one to hold the canister. works really well to reach both wheels and have one central place to pump so its not rolling all over the floor. other bottle cage is for a half bottle to hold tools.
I'm all about a left pull on the seat tube, and a right pull on the down tube, with a half frame bag for tools and lunch (burrito and/or PB&Js and bananas), and a feedbag for quick power snacks.
One of the great things about your videos is that you done edit yourself. You show yourself as human, making mistakes . Thanks
Dust, this was like watching Sesame Street for cycling enthusiasts. Hilarious!
Oh man I need some puppets!
Lol that will be freaking hit for the "Diy" episodes. ❤
I....KNEW....I'd learn something!! My struggles with cardboard box opening are now over! Turns out I've been using the wrong tool for the job all these years! Thanks DK! :)
Hahaha happy to share my time honored tradition of appropriate box opening.
Only 1 try to bleed brakes this time?!? You are basically a pro mech now! 2nd best video on the internet.
Can I edit comments? Haha, note to self, wait to comment until watching whole video. Still good job, semi-pro mechanic.
Haha love it keep the mid video comments coming.
SCOK (spit coffee on kbd) when you left the pads out and then the quick disclaimer. love it.
When you're a big fan of DK but you've been a bike mechanic.....
Haha hahah 🤣😂🤣
I love the narration combined with the cuts. Great stuff.
🙌 words of a seasoned pro, 🤘
For your rear brake problem, when you pressed the calipers in, make sure not to squeeze the brake levers until the rear wheel gets put back on. That may have caused you to get air in the line the first time. I've done this plenty of times. Now when I take off a wheel, i always put those disk brake bleed blocks.
So glad I am not the only one who self-high-fives on fixing my bike successfully
If you want to get those cages lower or fit bigger bottles under your frame bag check out the Wolftooth B-RAD system.
Lezyne also makes a high pressure pump for bottle cage mounting and it’s tiny!
I run the bottle cage pump mount as well after breaking a rib with the pump in my jersey pocket. I buy them on Amazon and they mount behind the cage. Love em
There's also an app by Feedback Sports where you can keep track of bike maintenance on multiple bikes!
So. Many. Air. Bubbles... Also love the saw sound effects!
YESH
"Hey Dirtbag! Clean up your act!" love, your disintegrating sippy cup
Always so dang good, player!!!
Came across Hutcheson tires last year. Took a chance on them (700x35 for a converted hybrid-now-gravel ride), am very happy. Awesome video as usual... folks sending ya product and not sponsoring, they missed that part of the contract I sent them after the last video 😝
This slithery SOB’s I’m still keeping you as my Console
Apart from all the free stuff, this is a good representation of my attempts to mechanic my bicycle.
MAY MAN! Totally feeling on you on the tire thing. I have sooooo many tires! always looking for the next best thing for each of my bicycles.
Broke a rib which makes laughing a painful affair, but for some reason, I just didn’t care. Keep your glibness coming!
I cracked a rib once! Got respect for your endurance! Heal up bud.
Dustin Klein Thanks Dustin, appreciate it!
Ugh I know the feeling! I cleaned and lubed my sticky piston and somehow contaminated my brake pads and now I'm on my third time taking them off the calipers to clean them. This time I'm going to torch them muahaha!
Bike stuff OMG never ends, Im glad Im not the only one having issues out there!
i have broken enough small pumps to realize most of my pumps fit in all of the different mounts that i have put "under" and beside the cages. I swap pumps with impunity. However, some have an added velcro strap which is reassuring for the bumps. I am interested to hear how the bottle retention is on your side cages.
So damn hilarious 🤣 and love frame bags. Yes side mount bottle cage is a must with them. I ride like I’ll have a to do a full rebuild/will encounter the apocalypse every time I go out. So my daily tool kit is massive and fills a lot of the frame bag.
DK, those Hutchinson's look nice; still enjoying? Re: tubeless 1st seating. Not sure if tried, but a nice hack is to use an old valve core with 'valve' part of it snapped out to allow air to flow into the tyre far more easily. Can't guarantee seating with a pocket pump - but does make setting up with a track pump far less of a pump your arse off and sacrifice your eldest to the gods type event.
Entertaining and really well put together vid, much appreciated over here 👍
I am always looking forward for your great video! I started hating handing dot 5.1 fluids, as it is super nasty/toxic/environmentally damaging...so I switched to GRX! Bleeding is easy and better braking power!
Love your vids DK. Weeds sprayer also works great for seating tubeless rubber. They're pretty much free too!
Oh yeah Ive yet to try this. There are a few videos on doing this. Have you had any luck with them?
@@EverythingsBeenDone yeah dude. It's all i use, being the cheapskate that i am. Works fine on large volume MTB every time!
Looking forward to marveling at DK's wizardry! 😎
My Man!!!
Dude I friggin love your videos! Editing is amazing and man you're hilarious 😆
Massive respect! Cheers!
I like the Mix in this Video from mechanic to road super Dustin go on
Great! Felt like it could use a little balance it’s good to get out of the shop now and again 😜
Excellent Dustin, I think there's a mechanic in you somewhere 😜 keep up the good work 👍🔧🔧🧰🧰🔩🔩
Yo Dustin this is wild. I've been looking for a used Park Tool INF-2 and an air compressor because my Joe Blow won't cut it for tubeless. Might have to get a TubiBooster now! Also I did the same thing with some SRAM Rival disc brakes today, cleaned and checked the pistons. Make sure you push them both in fully with a plastic tire lever and possibly open your pads a bit with a packing pad protector before putting the wheel back on.
Thanks for the tips player
So the Tubi is about getting the air into the tire fast so it seats? I’m unclear on that. (but I also only have one bike with tubeless and my friend owns a bike shop so I’ve always had him set them up - he obviously has a compressor.)
3:04 The problem is that they're usually not as sturdy for bigger bottles like the Soma Further.
That’s some solid insight right there! Appreciate you.
@@EverythingsBeenDone You ride long rides without much stopping, usually some number of bottles (more than one) with you, right? Consider a camelbag in the (properly larger) frame bag?
need to do a comparo video between your Jenna's and your Hook EXT-C vs Ritchey mtb bike.
🤔 how would I compare them? Same route? Group break down? I think I’m starting to get it. Any other ideas?
@@EverythingsBeenDone same short-ish route?
I love everything you make.
Much respect Kris!!
Fantastic....top tips...laughs....tyres an stuff...magic editing....my week is now complete. Is it Thursday yet???
Wayne Clark for President 📈
@@EverythingsBeenDone can I have a go...
I also ride with the pump on the bottle cage mount. At least topeak's mount fits on the non-driveside so for pictures it's obstructed by the downtube. Also topeak sells just the mount itself but it's at criminal prices.
Have you found when the mount is on no drive side the handle can giggle loose on rugged terrain?
@@EverythingsBeenDone hey DK. It's never giggled out ever not even on gravel. The mount has a rubber band that stretches over the pump that's handle side down to keep it in place. Topeak Racerocket pump.
5 Years later... Bottle in the bottle cage disintegrates and water splashes onto DK's over-shorts.
OH Man I hope I have my camera ready LOL!
“A scones gotta be dry!!! You can’t have a moist scone!” -Larry David
HAHAHAHAHa
Your vids crack me up. Love your shop.
Not putting the pistons back after 2000 miles it was brutal getting it back. After 3 days i eventually got the pistons to retract. When i do this i also clean the pistons before i retract them, and i also put oil on the pistons. Some people use a kind of silicon. Worked well for me, so i do retract the pistons (push them back) more often. Because...I am avoiding the dreaded brake bleed. Never done it, good on you :-). Not looking forward to that. I can't wait to open my next box using your technique. I am putting in a new saw blade right now. I have a saddle coming later this week. Or i could wait for a box of tires coming. I think that cannister you got could make a mean espresso - Large.
Im sure you could tackle a break bleed.
@@EverythingsBeenDone i forgot to use the saw. i was so excited to get my saddle and put it on, then one of the saddle bolts disappeared took me 2 elapsed hours to find it lol. I think i have another package coming, i'll have to hang my saw up over the mailbox. Have you ever used a dremel to open a box. Hmmmm, what fitting to use, so many. Sandpaper, metal sharpener, glass polisher...
Looking forward to the 6mo update on the biodegradable bottle. Any thoughts on if prolonged water/sports drink exposer will cause a shorter lifespan on the bottle?
New tire days is always great. I had mines like two weeks ago & loving how better my gravel bike rolls on the road & on the trail! What was the red bike with the ritchey tires in the background?
That’s a p 29er back there
@@EverythingsBeenDone could be a good candidate for Lauf fork for rough gravel single track
How about an up-date on your stable. I'm getting lost on how their are equipped now, especially with the Wlliers. Cheers
This is a great idea! thanks for the suggestion. Keep em coming, Im always looking for new ones.
Had that brake problem on my mtb recently. First disc brakes I had so I tried to replace the pads by myself. Ended up with a cracked pistom and leaking brakes after pushing the pistons in. Conclusion: new brake on the front and new set of pads since i contaminated the other set 💩
Always entertaining.Thank you . More power to you brother.
🙌🤘🙌🤘
Gah hate Sram hydraulic bleeding. Shimano is for the peepo. Also same experience with HUTCH tires, easiest tubeless setup! I have a air booster also Sucks to pump it up to pressure plus gotta do it for each tire!
Brilliant videos, great rides 👍
Glad you like them!
Another funny episode. Thanks for the shout out on my Bday. Reid Darth
Hey Dust, later in some next "episode" (sounds funny), can you give us more feedback how the Hutchinson toureq are holding. I'm more intereste to know in the rolling resistance those time when you hit the pave roads compare to the gravelking SK.
Touregs are good on pace as well. I have only riddin the Gravel King SF as 650 b so comparing is tricky but they are def in the same category.
That's good enough to know. ..thanks bud!
New tyres + new bar tape = new bike!
Bout to order some of that topeak shizzz... topeak, sponsor the channel yeah
3 bikes? all out of service? sounds familiar, until I got a vintage mtb. Trust me, you need one. And guess what, they are cheap so you need no sponsors for one. You could draw the whole steel frame like I did, with a sharper. For the fire roads you ride and 650b wheels you ride, not sure you will notice the difference. Greetings from the Basque Country!
Inspired me to tidy my workshop 🤓
That’s what’s up!
Awesomely entertaining content as always bud. Ps I run a Topeak Racerocket HP Bicycle Pump
as well. Perhaps you can find a friend with a 3d printer to whip you up some more mounts? its an easy enough design. Just a thought. :)
🤣 SRAM brake bleed and blind optimism 🤣 easiest tubeless setup, there's not sealant everywhere, I'm not swearing or sweating 🤣 that's just some funny shit, great episode!
You know!!
It's pronounced like "two - R - egg" XD. Nice content as always!
Finally! THANK YOU 🙌🙌🙌
I always thought that toureg was a bastardisation of Tuareg, a subset of the nomadic group of Muslim Berbers of the Saharan fringe. That one is even harder to pronounce...
Do you guys not have the Volkswagen Touareg over there?
@@BrentonCollas you are talking about the same thing dude. Touareg (french) = Tuareg (english)
Looking Good ombre 🔥👍👍
this is my favorite dklein video, was laughing the entire time lol
That was fun buddy
Wait, wait -- how do you lock rear derailleur in down position? Is this a model with some kind of lock built it in or do you put invisible screwdriver and I missed that? :-)
Im not sure if a SRAM thing there is a little pin on the derailleur.I had one for years and never knew about it either ;)
It would be scary funny if you appear in ACN youtube channel 😀
as alway's fun and informative.....playa blows up the net!! yay D.k
Coolest of cool, right here!
TUBI BOOSTER hahahaha
For keeping track of bike maintenance, check out the Feedback Sports app. Add your bikes, link them in the app to your Strava, and you can set date/mileage reminders
Hey Dustin ! This video is out just when i needed it ! My question is, when you will have ridden the 700x45c enough - which do you prefer between 700x45 and 650bx45ish ? Is 700 enjoyable or does it feel like a truck ? Or the 650b is just more playful and enjoyable ? I am currently riding 650b wheels that came with my Nukeproof Digger and am looking to upgrade to a lighter wheelset but cannot decide which size is better. Thank you and keep up the good work ! Cheers from France :-)
Why no panaracers? I must have missed something???
Uhh, yeah... Mini-pumps mounted with the bottle cage is the only way to fly!
That what I’m talkin about!
Pure mfing chaos. I LOVE IT
LMAO!
Disc brake rota may need straightening.. might be bent
Side loaders are for frame bags, and those of us who are height challenged and have to ride small frames...
Have you tried the Hutchinson CX 700x47mm tire? How would you say this compares to the GravelKing SK on & off the road?
they are very similar. Did you end up getting a pair?
@@EverythingsBeenDone I may if I don't like how the gravel kings ride
Was that biodegradable bottle packaged in a tight plastic cover?! 🙃 please confirm that is biodegradable too haha
What do you mean you aren’t able to ride panaracer?
How come you can’t ride Panaracers?
Hi, great, no excellents videos, have it all as a good movie 🤣, taking your words in a pasar video, I would like to make you a question about a doubt that I have about gravel bikes sizes. I have over 20 years riding bikes, I am 1,73 mts tall and I usually use size 54 in route bikes and size M in mtb, recently I bought a a Niner RLT 9 size 53 but I found it big for me, I supouse that is for the kind of bike because according the size chart is the right, so is normal than you feel a gravel Bike bigger? Please I really appreciate your recomendation thanks
Frame protection?
Umm...Dustin...what’s “Dad Ass”? I must have missed that episode?
Epoxy worked on the Millennial Falcon shower pump, it won’t work on the brakes?
🤪😛😜
I'm not saying you're funny, but I chortled.
It was Gary
That’s Entertaiment!
My man!!
Vincent Pinlac i agree ☝🏼
Keep up the amazing content. You're awesome, entertaining, and super(?)
Much respect my dude!
Не ну это реально классно
I did tip a few ppl off 😅😅😅
Disc breaks, more trouble than they're worth. Heh... disc brakes... disc breaks. Yeah they do.
They feel so good!
Why aren't you able to ride Panaracer?
Because I’m trying the new Hutchinson tires.
2:27 But which type of Loctite? :-P
BLUE Baby BLUE
TIRES!!!!!!
All day I dream about Tires
@@ronwhite8503 TYRES!!!!!!
Yo breed that blake!
Hahahaha
Scone...scoane...scon....s'gon...
Best tip for brake issues.....buy Shimano ✌️
I think it’s pronounced “twa-reg”. Historically en.wikipedia.org/wiki/Tuareg_people
Though Hutchinson’s spelling is too similar to a lardy suv from VW.
Sorry for splitting hairs, Dustin, but I think of this every time you mention it: when companies send you free things to keep in exchange for mentioning them on your videos, that's pretty much the same thing as 'sponsoring' you.
Sponsorship means $ transfer. Free stuff is flow. It’s very different to me.
Agree to disagree. Regardless, I super-dig your channel. Thank you!
if you want the bottom bracket destroyed, let me at it!!
We have similar super powers I see ;)
twA-reg
Thank you!
Killing me... :-) :-)