1996 Land Cruiser Before & After Old Man Emu Lift
Вставка
- Опубліковано 4 жов 2024
- Installed lift kit from Old Man Emu (link below)
and some caster correction bushings (link below).
also has some ProComp 315/75/16 Xtreme MTs on the stock wheels (link below)
3.5 inches in the front and 2+ inches in the rear.
It makes my capable rig even more capable.
check me out on Instagram @BanditoBikes
If you are patient Pro Comp does a buy three get one free deal every Summer.
OME Heavy Lift Kit amzn.to/2WEvQVx
Caster correction bushings amzn.to/2GmnQ64
Pro Comp Xtreme MT tires amzn.to/3eHcAyU - Авто та транспорт
Nice lift. Just did mine, running 850 fronts and 864 rears. Thinking about getting 30mm spacers for the front to not get the stink bug look and modify the lca bracket mount to correct the castor so no more sway steering.
Looks great. Nice work!
Eric, with the castor plates installed there are zero driveability issues. I was pretty stunned. I am running 315-75-16s. That size tire does really take the guts out of an already gutless motor. I will have to re-gear now as accelerating or holding highway speeds(75mph) in a headwind are very tough. Thinking of just dropping a V8 in it:)
Also running 315/75/16 Dune Grapples. Not trailed yet just waiting on a winch lockers for back up.
Nice! It's much more noticeable than I would have thought. Any driveability issues? And what size tires are you running?
Looks good. I want to do this on my 96 LX450
Thanks and get to it buddy!
It is 3.5 in the front and 2.5 in the rear.
found this old man 3" lift kit on Amazon for 1k ... was it easy to install . did you buy any other parts to complete job ....
It comes witb castor correction plates from Slee Off-road and I made some spacers out of aluminum blocks for the sway bar.
I bought the heavy load level stance kit
how much of a lift is that?? i was looking at getting an OME 2-2.5 in. lift this spring hopefully
So how come it's different hight front to rear and it looks level on camera? Looking to lift my 80 here at some point
because when it is stock it is already higher in the back than the front