Aillio Bullet Deep Cleaning
Вставка
- Опубліковано 8 лис 2024
- A clean roaster is a happy, productive and safe roaster. Here's a step by step tutorial on how to give your Aillio Bullet a good cleaning. With a few cleaning supplies and a little bit of effort, your Bullet can shine from the inside out.
Aillio Bullet
www.sweetmaria...
Cafiza Powder
www.sweetmaria...
www.sweetmarias.com
Instagram: / sweetmarias
Facebook: / sweetmariascoffee
Twitter: / sweetmarias
Sweet Maria's Coffee Library: library.sweetm...
#AillioBullet #HomeRoasting #CoffeeRoasting
The impeller fan may have had an improvement since the video was made - you can use the long handle H2 0x60 supplied with the Aillio and loosen/ tighten the set screw of the impeller fan from the top. One of the fan blades has a moon shape cutout to allow the Allen wrench through the fan housing. It’s aligned with the set screw so align it to the exhaust port to use it. It’s way easier than using the L shaped Allan wrench. I’m super grateful for the video- it’s clear and quick- thanks for making it.
It took me way too long to look for this comment. Thank you
Great tip. Thank you!
Simple green works great it also cleans bongs really well
I've been playing with the popcorn while for a while and really wanted to take the next step into seriously roast at least in lb batches. This machine has definitely caught my attention.
I have made a from panel support available for use when cleaning the Aillio Bullet. It includes a place to store the front panel screws.
Thank you so much for the video my bullet is needing some tlc and this video gives me confidence to take on the task (: thanks
Note that it's very easy to put the impeller fan back too far in or too far out. It is wise to do a test afterwards without coffee
I needed this. Thanks!
I would use a food safe cleaner like tabz for the inside of a drum roaster. I put simple green on greasy engines.
About how many roasts do you get between these deeper cleanings? Thanks for the video.
The manual states about every 30k grams of coffee
What about the gap beneath the drum. Do we have to clean it? BTW, thanks for video.
Vacuuming around the edge is a good idea but you don't need to access the area beneath the drum. Shoot us an email if you have any questions. info@sweetmarias.com
So, I own a bullet and the bearing of the drum is stuck to the face. Do I give it a stab and get it out?
Try pushing the drum upward as you press the bearing in. Please email us if you have any questions. info@sweetmarias.com. Here's a troubleshooting vid. ua-cam.com/video/gueYK2csv58/v-deo.html
does the drum of any other part ever need cleaning? is it possible/advisable to ever remove the drum for inspection? what about the controller area and it's cooling fan and vent holes?
The drum just needs a good vacuum. The high heat and abrasion from the coffee itself will keep it free from excessive buildup and also maintain it's seasoning. Cleaning inside the control area isn't necessary but if you need to get in there to replace the boards or do any repairs, here's how to do it. ua-cam.com/video/TJzGPMt-TnY/v-deo.html
Hi there,
When do you project that you will have the Bullet R1 V2 in stock for purchase/order?
Hopefully soon. We have a shipment on the way. Sign up for an email notification on the Bullet product page and we'll email you when we have more in. www.sweetmarias.com/aillio-bullet-r1-roaster.html
@@SweetMariasCoffee sounds great, I am now on your email notification list!
-Steve
What is your cafiza solution ratio
6 g of powder for every liter of hot water will give you a good solution.
Should you still clean the newer IR sensors?
Yes, even though the Bullet has a self cleaning system in place, it's still important to clean it with a cotton swab and alchohol.
Hi. What size allen key did you use to remove the impeller fan?
Our Bullet technician says H2 0X60 is the correct size.
hello can you tell me I would like to know the size of the drive sprocket and belt. Thank you very much.
Hello. Please contact the manufacturer, Aillio for the measurements of those elements. Thanks. aillio.com/?page_id=28
Does the bullet have a dual drum design?
No. It has a heavy gauge single drum
2:54 when I remount the faceplate with the screws back in the holes. The bearing does not fit in the middle hole of the faceplate so I have to lift the drum up to align the hole. In the video, you didn’t do any of that. You just put it back easily… My brand new bullet purchased from you came with a lot of issues…
Sorry to hear about all the issues. Please email us at bulletsupport@sweetmarias.com and we'll help you out.
@@SweetMariasCoffee I did email you today.