I was able to find most of everything for under $2400 so yeah he's verified on the stuff and also all the stuff needed doesn't have to be bought all at the same time and can be bought over time
I'm dying to build one of these in the spring when I have the money. I'm going to have a 3-3.5k budget so I can buy slightly higher quality parts, what would you recommend?
@@rosa2701 depends on what kinds of speeds you'll want but you going to want to make sure everything matches up together so that you don't have to reorder things last minute
Please Replace the Zoom Fork for Feeling and Safty. They are Dangerous in MountainBikes and with these you don’t Brake Rapidly from 55mph 😅 A used Downhill Fork like a Rockshox Boxxer oder a Marzocchi 888 will be the best. They are definitely Strong enough to handle this shit.
I've been looking at one of your other builds the stealth bomber frame black in color i commented on it what are those tire and wheel dimensions because i know they aren't 20x4 at least i don't think they are and if i do that build id like to use at most 24 inch rins
Could you do a drag race against a surron lbx ? Both bikes draw the same power I think but hub motors often have less torque so that would be interesting to see
@@ENDOPRYSMyt NBpower products are back on Amazon now. Not sure what happened. They were taking a while to respond to me. Can't find answers online either for some stuff. Anyway did you connect the self learning wires the first time and also what in the world do reverse and cruise connect to? What is the lock wire on the display for? I am going to get a custom controller bag for the top tube because the straps are in the wrong places. I did some research and whoever said the yellow box is crap is correct. I am going to hire an electrical person to crimp the wires together for me. My 1200W setup I only had to pay for torque arms to be fabricated. This one controller bag and wire crimping as well. I ordered some 2 2mm disc brake spacers and 1mm disc brake spacers from Grin Tech because the distance between the rotor and the motor isn't enough unlike the 1200W setup I have which has no spacers.
I love the voice overs on the comments!
I can’t keep it serios
I was able to find most of everything for under $2400 so yeah he's verified on the stuff and also all the stuff needed doesn't have to be bought all at the same time and can be bought over time
I'm dying to build one of these in the spring when I have the money. I'm going to have a 3-3.5k budget so I can buy slightly higher quality parts, what would you recommend?
@@rosa2701 depends on what kinds of speeds you'll want but you going to want to make sure everything matches up together so that you don't have to reorder things last minute
I hv a similar bike and was thinking of ideas on how to get rid of the peddles and put just pegs
I think it looks cool, good job 👍
How much does it weight do you think? Is it able to get up some apartment stairs?
I mean lol $2500 just get a mantis but with that being said I enjoy the vids thinking about getting the E2 just to upgrade
Please Replace the Zoom Fork for Feeling and Safty. They are Dangerous in MountainBikes and with these you don’t Brake Rapidly from 55mph 😅
A used Downhill Fork like a Rockshox Boxxer oder a Marzocchi 888 will be the best. They are definitely Strong enough to handle this shit.
Then it will no longer be a budget build
@@elias8981 a used 888 from 2001 will cost the same as the Zoom.
I've been looking at one of your other builds the stealth bomber frame black in color i commented on it what are those tire and wheel dimensions because i know they aren't 20x4 at least i don't think they are and if i do that build id like to use at most 24 inch rins
Could you do a drag race against a surron lbx ? Both bikes draw the same power I think but hub motors often have less torque so that would be interesting to see
Please show how to change to foot pegs.!!!
Can i use a qs motor on a fatbike with 190mm dropouts? When i look to qs motor sellers they say its made for 155mm dropouts.
The dropout on this bike is 190. You just need to use about an inch of thick washers on each side to space it
So the conversion kit is unavailable now?
Yeah I guess so I didn’t expect that. You may have to contact the supplier directly to get one
@@ENDOPRYSMyt NBpower products are back on Amazon now. Not sure what happened. They were taking a while to respond to me. Can't find answers online either for some stuff. Anyway did you connect the self learning wires the first time and also what in the world do reverse and cruise connect to? What is the lock wire on the display for? I am going to get a custom controller bag for the top tube because the straps are in the wrong places. I did some research and whoever said the yellow box is crap is correct. I am going to hire an electrical person to crimp the wires together for me. My 1200W setup I only had to pay for torque arms to be fabricated. This one controller bag and wire crimping as well. I ordered some 2 2mm disc brake spacers and 1mm disc brake spacers from Grin Tech because the distance between the rotor and the motor isn't enough unlike the 1200W setup I have which has no spacers.
eww