FJ Cruiser Dual Battery Kit Installation Video
Вставка
- Опубліковано 29 сер 2024
- Shane from Genesis Offroad shows you just how easy it is to install the dual battery system for the Toyota FJ Cruiser! This system is designed to protect your cranking battery from being drained down by your aftermarket accessories, so you don't get stuck with a dead cranking battery. No wiring is necessary since our kits come completely pre-wired for you right out of the box. Includes a heavy duty battery combiner, power and ground bus bars for connecting your accessories, boost button to jump start from the second battery if the cranking battery is dead, and a port for the innovative G Screen monitoring system.
** PLEASE NOTE! ** This video shows our Gen 2 version of the dual battery kit. Our new Gen 3 kit has replaced this version, but the installation process is virtually identical. Please call or email if you have any questions about installing the Gen 3 kit - 901-214-5337 or info@genesisoffroad.com
Watch our Gen 3 Overview video here - • Gen 3 Dual Battery Sys...
In stock for immediate shipping! Learn more and order yours here - www.genesisoff...
I ordered this kit yesterday. I'll let you know how I do installing it!! Your presentation is excellent
Thank you Kevin! Holler if you have any questions!
Been a year, how did it go with your installation?
Congrats on the new set up. Love our JK set up. Been utilizing for several years with zero issues.
Thanks Mike, that’s awesome, so glad to hear it!
I have one thing to say, AWESOME video! Step by step how to. I will order one for my 2013 FJ. Thank you, Nick.
Thanks for the kind words Nick! We have these kits in stock for quick shipping for you!
I installed optima red tops on my genesis kit. Here’s a tip for people using them. Use the tray that comes with them to lift the battery up higher so the battery top can touch the mounting bracket. If you don’t they will be loose in the cage and can short. Also make sure there is room and wires don’t get in the way of the fuse box cover. Another one is you can reach the fuse box power harness bracket under the battery to re install later. Install was easy but if you have a power tray like mine the bolts to get to them will be tougher and you will need to use a long extension to reach the power try bolts. Great product!
Great tips, thank you!
Very instructive
Good tip, but a few issues with this setup: 1. The vehicle weight balance will be off and more wear on the driver side suspension. 2. Cost, it can be cheaper to tackle this issue with a bracket on the passenger side and a device for under $150 from Amazon to do the same and keep the front weight in better balance.
We’re only adding an extra 50 lbs to the vehicle. That’s much less than a full tank of gas, or a passenger.
Excellent presentation!!
Nice clean design. Like!
Thank you!
Hey, Shane great kit just ordered one for my 4runner. About to see that 24 hour shipping....lol
Shane I bow down to you brother, you were true to your word on the 24 he rule for shipping. I was kinda hesitant because all my other parts for mods have been on back order or 4-6 weeks lead time. It good to buy from a company that is prepared for this supply chain madness…lol. Will definitely making more purchases from you
Is it possible to put a push button inside the car for connecting the battery instead of opening the hood?
Yes, we accomplish that with our G Screen Monitoring System. The G Screen will allow you to link the batteries together to jump start the engine if the cranking battery is low. You can see more details about how it works here - ua-cam.com/video/4TO7FXf_GLs/v-deo.htmlfeature=shared Also, just a reminder that the system shown in this installation video has been replaced by our new Gen 3 Power Hub. The installation process is virtually identical, but the new Power Hub has lots of improvements. We will try to get an FJ in the shop sometime soon to update the install video, but you can learn more about the Power Hub here - ua-cam.com/video/_Fr_tLUEFIA/v-deo.htmlfeature=shared I hope this helps! -Shane
Shane I purchased the dual battery system for my Polaris 1000. I reviewed your videos from 2016 on setting up the system as well as the red light on the isolator. My question to you is that both batteries would continue to drain. I found that the isolator was getting very hot and disconnected the middle red wire. The isolator cooled down quickly and the ATV would start without any problem on an ongoing basis. I don't know if the isolator is bad or the chip or brains of the system that sits on the side. Would you mind giving me your opinion. Thank you...Roc.
The heat from the isolator is 100% normal - see this video for more details - ua-cam.com/video/S_zpe2o0VbU/v-deo.html. If you need any assistance with testing or troubleshooting, please contact us at 901-214-5337 or info@genesisoffroad.com.
I have an 08 GX470. Can the Gen3 FJ kit work on my truck?
Probably not. We've had a handful of customers test fit our FJ and 4runner kits into the Lexus vehicles over the years, and it seems they are just a little bit more cramped for space under the hood, so there's just not enough room to fit 2 batteries in there. We do have a Universal Power Hub that has all the same features that you can mount yourself anywhere you have the room, along with some other universal battery mounting options. Check this link and call us with any questions. www.genesisoffroad.com/Universal_c_27.html
I am looking at purchasing this for my FJ. Would I need to get an alternator boost for this system? Also are you going to have any discounts for President Day? 😊
The stock alternator will work just fine. And sorry, no we do not run any sales.
Can optima yellow tip work for this set up , sorry for my dumb question
Yes, the Optima Yellow Top Group 75/25 will work, but just be aware that it is physically smaller than the industry standard Group 25 size, and therefore it has less capacity than other brands.
Is this still available? The link doesn't work.
Oops! Sorry about that! I have fixed the link in the description to point to our new Gen 3 version of our dual battery system. Here's a shortcut for you!
www.genesisoffroad.com/gen3-fj-dual-battery-kit
Can I run dual north star x2 power batteries? Their batteries are pretty much 2 batteries inside of 1.
Yes just be sure to get the Group 25 size for the FJ.
Hi. I was looking to purchase this soon however I do not see it on your website. Is this product still available?
Yes we have FJ kits in stock for fast shipping!
www.genesisoffroad.com/gen3-fj-dual-battery-kit
@@GenesisOffroad Hey thanks!! And I really appreciate the speedy response!!
@@AshtonGraham280 you’re welcome! I’ve gotta fix the links in the descriptions on all our videos since we launched the new Gen 3 kits recently. 🤦♂️
What about oil filter? I've 2008 FJ and filter between battery and engine.
It will be fine. The oil fill neck is still closer to the batteries than the oil filter on the 2007-09 models. We have several customers with our kit in those year models with no issues.
Is it possible to run solar to the auxiliary battery with this setup?
Yes, super easy. Watch this clip for more info on solar panels - ua-cam.com/video/tRe2Mjps0sg/v-deo.html
Man I’m not sure if this will work for my FJ now?
Why?
Nut serts lol