Could u pls advise on my transas ecdis the radar overlay is not activating the option has turned orange but radar targets, EBL VRM are showing on Ecdis display.I tried switching off and on both radars and Ecdis but still the option for activating overlay is orange and not green. On Ecdis it is showing alert as Ecdis: Sensor failure S1: no connect S1: video timeout. TIA
Thanks I have a question ⁉️ The SIRE inspector asked about alarm list of same ECDIS on one of our fleet vessel and took a observation I couldn't find anything regarding that Can you please explain it
Thanks a lot for your video Please i have problem in our ecdis Transas navi sailor 4000 I reinstall the software because navi sailor was not working correctly i add all sensor and now it is working well except the alarm sound not working i go to sys config i did not understand what to do or how to config the alarm please can you help me how to fix this and make sailor 4000 recognize the alarm sound device ?
Hi …. , is there a GPS discrepancy alarm setting available for the user to change ? Our company require the setting to be 50 mts . However I’m unable to find where to check or change this setting . Please assist if you have any info on this .
Thank you so much for the.. I have a question sir.. How can you set the audio alarm to be audble.. i have tried highlight all the alarms but no alarm sounds came... I do see the alarm indicator from the monitor but no alarm sound...
Transas(Part 1)= 𝐄𝐂𝐃𝐈𝐒 𝐁𝐀𝐒𝐈𝐂𝐒
ua-cam.com/video/zESi-W1xrXg/v-deo.html
Transas(Part 2)= 𝗥𝗢𝗨𝗧𝗘 𝗣𝗟𝗔𝗡𝗡𝗜𝗡𝗚
ua-cam.com/video/T18CqW5W57Q/v-deo.html
Transas (Part 3) =𝗨𝗦𝗘𝗥 𝗠𝗔𝗣 (𝐄𝐗𝐏𝐋𝐀𝐈𝐍𝐄𝐃 𝐈𝐍 𝐃𝐄𝐓𝐀𝐈𝐋)
ua-cam.com/video/XiHUJsJf8yc/v-deo.html
Transas (Part 4)= 𝐏𝐋𝐀𝐘𝐁𝐀𝐂𝐊, 𝐄𝐁𝐋&𝗩𝗥𝗠 𝗲𝘅𝗽𝗹𝗮𝗶𝗻𝗲𝗱
ua-cam.com/video/276htADseag/v-deo.html
Transas(part 5)- 𝐀𝐋𝐀𝐑𝐌𝐒 𝐈𝐍 𝐓𝐑𝐀𝐍𝐒𝐀𝐒
ua-cam.com/video/U2DYs8B_I6E/v-deo.html
Transas(part6)=𝗡𝗔𝗩𝗜 𝗣𝗟𝗔𝗡𝗡𝗘𝗥 𝗕𝗔𝗦𝗜𝗖
ua-cam.com/video/yQQchkrnh2c/v-deo.html
TRANSAS-(part7)- 𝐖𝐞𝐞𝐤𝐥𝐲 𝐮𝐩𝐝𝐚𝐭𝐞,𝐄𝐍𝐂 𝐎𝐑𝐃𝐄𝐑 𝐯𝐢𝐚 𝐍𝐀𝐕𝐈 𝐏𝐋𝐀𝐍𝐍𝐄𝐑
ua-cam.com/video/qDoSSORTrps/v-deo.html
Transas(Part 8)- How to Export Routes & user map
ua-cam.com/video/8dly2tulo00/v-deo.html
Do you know how to reduce the alarm volume?
Thank you so much for your information.
is there any answer key to navisailor transas 4000 test?.. Thanks👍
Could u pls advise on my transas ecdis the radar overlay is not activating the option has turned orange but radar targets, EBL VRM are showing on Ecdis display.I tried switching off and on both radars and Ecdis but still the option for activating overlay is orange and not green.
On Ecdis it is showing alert as
Ecdis: Sensor failure
S1: no connect
S1: video timeout. TIA
Thanks
I have a question ⁉️
The SIRE inspector asked about alarm list of same ECDIS on one of our fleet vessel and took a observation
I couldn't find anything regarding that
Can you please explain it
There are 5 mandatory alarms present in ecdis as per IMO that is normally asked by vetting inspector
ua-cam.com/video/Zr63jGLdUss/v-deo.html
U can watch this video at 16:00 minute I have talked about those 5 alarms
You may use data tool and copy alarms from there may be
Thanks a lot for your video
Please i have problem in our ecdis
Transas navi sailor 4000
I reinstall the software because navi sailor was not working correctly i add all sensor and now it is working well except the alarm sound not working i go to sys config i did not understand what to do or how to config the alarm please can you help me how to fix this and make sailor 4000 recognize the alarm sound device ?
Hi …. , is there a GPS discrepancy alarm setting available for the user to change ?
Our company require the setting to be 50 mts . However I’m unable to find where to check or change this setting .
Please assist if you have any info on this .
I don’t it there never saw any such setting
What to do if not showing radar targets in the ECDIs
GOOD DEMONSTRATION..PLS NXT TIME, MAKE IT SLOWLY EXPLAINING..T.Y
Thank you, I will
Sir my ecdis display showing DISPLAY NOT REAL TIME
how to remove this alarm
Thank you so much for the.. I have a question sir.. How can you set the audio alarm to be audble.. i have tried highlight all the alarms but no alarm sounds came... I do see the alarm indicator from the monitor but no alarm sound...
Brother I was never able to mute the alarm just ask your electrical officer to check may be sound system is not working hence u r not getting alarm
@@atlantianpawanharyana1005 thank you so much sir...
Did you found how to switch off buzzer?)
@@atlantianpawanharyana1005 I found... omg...)))
Need to logout, pres settings, after write password: transas. Choose workbench and sound alarm - unmarked. Done...
What is the maximum distance/range in waypoint alarm
I am getting vdr connection lost what to do
There will be vdr cable connected to ecdis (just like other sensor cables) try to check that it might be loose
How to disable WO1 AIS Lost target alarm?
U can see in this video bro I have shown that .. in Ecdis u have to reduce cpa and to tcpa alarm values i
How about W01: low battery how can i remove this sir
Whats the service password 🤔