How to Use a Fallout Remover to Clean Car Wheels
Вставка
- Опубліковано 2 жов 2024
- How to Use a Fallout Remover to Clean Car Wheels.
Fallout removers are great, they help to remove bonded on iron particles that can cause those nasty rust spots on wheels and car paint work, but are you using yours in the most effective way?
In this video I'm going to show you how to use a fallout remover to correctly remove Iron and brake dust particles from your cars wheels.
We often see the picture of the 'bleeding wheel' when these products are sold, but is that the best way to use a fallout remover?
I put this to the test, and show you how that might not be the most effective way to remove the iron particles that you set out to remove. You may not even be removing them at all!
We experiment to find the best method of using a fallout remover to 'clean' your cars wheels.
Trolls Breath from Pro Kleen:
1 Litre: amzn.to/2IsG5Fu [UK Affiliate Link]
5 Litres: amzn.to/2G0CBvi [UK Affiliate Link]
Remember to give this video a like, and if you have any tips, please share them in the comments section.
Subscribe for more great videos: www.youtube.co...
Talky Beat by Twin Musicom is licensed under a Creative Commons Attribution licence (creativecommon...)
Source: www.twinmusicom...
Artist: www.twinmusicom...
Follow me on Instagram: / mysupercarlife
Like My Supercar Life on Facebook: / my-supercar-life-17047...
Follow me on Twitter: / mysupercarlife
My Supercar Life Blog: www.mysupercarl...
Business enquiries: work@mysupercarlife.com
*Disclaimer:
All videos are produced for information only. The opinions and techniques shown are my own. I accept no responsibility for any loss or damage caused by following any of my videos or the techniques shown. Always try any techniques in a small inconspicuous area first. If you don't know what you're doing please leave it to the professionals, or seek professional advice.
Are you using your fallout remover the most effective way, and which fallout remover do you use and recommend? Let me know in the comments!
Can you use it on coatings like gtechniq c5, or will it affect it?
I Clean wheel first with a ph neutral soap then blow dry and use iron x for 3-5min then rinse
Malcolm Bale C5 is one of the best product for protection purposes. Iron or fallout removers could use for cleaning and break dust, but some ph natural cleaners help on increasing the life of the protection layer. Personally I prefer to use valet pro bilberry for heavy dirty wheels. It’s been 2 years and my C5 is still alive .
Korrosol best fallout remover
Very Useful Information !
I'd Like To Share That I Used Meguiars All Wheel Cleaner on May Car Paint For Iron Decontaminatio, And It Worked Fine.
This Tip Was From Dallas Paint Correction .
Many Thanks For All The Videos And Nice Tips !
Best Regards !
Ed
São Paulo
🇧🇷
Thanks for sharing. The thing is to do it properly you still need to clean the wheels first or you are just removing the surface iron particles (as shown in this video). The Meguiars product has both a cleaner and fallout remover. My opinion is that it's better done as 2 separate processes, clean then decontaminate. Or clean and then use the Meguiars 👍
Hello from Toulouse in France. Thank you for your videos which are as usual realistic and accurate. Indeed I tested several brands of Iron remoover without washing the rim before and it gave a very average result whatever the brand of product. A wash then a drying and then the Iron remoover, yes, it works.
You are a Good
Good luck, I am now your channel as a faithful
Merci beaucoup
Merci mon ami!
Thank you for your kind words! We both found the same thing, using the remover before is not the best way, and doesn't give the best results, wastes product and money! Even the best products in the world used incorrectly will give bad results, I hope this helps people on the right track.
Thanks for commenting :-)
Pro advice you know your stuff I appreciate it mate thanks I also detail from time to time 👍💎
No problem 👍
i wet my wheels then use p&s brake buster then wet ,then wash in gyeon bathe plus,then bilt auto wheel,wet then gyeon wet coat,wet and blow dry a long process but my wheels are mint
Great video
Spot-on mate spot on that's the way you should do it watch the f****** things with fairy liquid just once only once then use the iron particle remover you've got a nice clean wheel and then seal the bloody wheel again with sealants so next time you wash it you're only needs used the wheel cleaner
Thanks dude, Exactly - work smarter not harder 😉
I’ve used it three times within 4 months… do you think I’ve done damage? My brake disc is always brown/orange when it dries and I don’t know what to do. I’m afraid if I use the fallout remover again it might cause damage or not work to remove the browning at all (even tho it reacts). Please help 😭
yea bro your disintegrating and melting your car
exactly i was looking for this video only...i know about fallout remover, but didnt know the procedure when to use at which step.. should i clean the wheels and do this or apply the remover and then clean the wheels... thank you soo much for clarifying this doubt.
Great video! A lot of knowledge in one video! So you should pretty much use it just like you use it on paint. Wash, dry, apply iron remover, then rinse off.
Only other reason to use fallout remover on wheels before cleaning is for before and after pictures lol
Thanks for the kind words! Yes, use it in exactly the same way as on paint, it's far more effective that way.
Definitely before washing for before and after pics, or to waste money lol!
Snowfoam /rinse
Shampoo/rinse
Fall out /rinse
Definitely best
Exactly how I would do my wheels, except why do your wheels last? Should be the first thing to clean so the dirt doesn't transfer onto your body sides when giving it a quick blast.
Thanks for commenting. Normally I would clean them first, but I did them last just for filming purposes. Sometimes it's easier as it can take so long to film things I'd run out of time and not end up getting the car cleaned LOL!
Hi what wheel woollies are you using?
Hi, It's the 3 piece kit that Wheel Woolies sell. 👍
👍🏻
So it is best to use fallout remover when you have cleaned your wheels first?
ever fall out remover is diffrent i have tryed loads the best one i use today is bilt hamber auto wheel its a fall out remover and wheel cleaner in one 👍
Top vid as always mate. I do my wheels in the order you prescribe but you make an interesting point about the regularity of usage. Cheers
Cheers mate! Yeah, you do have to be a bit careful with how often you use it. But it's not nearly as bad as what some of the scratch and go car washes use!
Fallout remover will not 100% clean the wheel. If you wanna be hardcore anal about it, you'd remove your wheels, degrease, rinse, wash, rinse, fallout, rinse, and claybar, wash, rinse and dry....... Ya.
It surprises me how many people think it does, and how many manufacturers sell the product as a cleaner. It's like everything else: it has it's place if used properly. I see the same thing with snowfoam where people complain that it doesn't work and it doesn't clean their car - It's not supposed to, it's a pre-wash to remove surface dust etc, prior to washing to help eliminate swirls - it was never designed to clean cars. It's mainly down to how things are marketed.
The intro is great, you are welcome for the support 👍👍👍 looking forward to the mid week vid 👍👍👍
Some fallout removers actually do contain soap, such as Dooka Bleed and Bilt Hamber Auto Wheels. But for those that don't, your point is spot-on.
True, but they will only react with the surface iron until you start to agitate and use the soap chemical at which point the fallout chemical doesn't have dwell time to remove the embedded iron particles under the dirt layer, if you see what I mean. It's hard to put in words 😁. I'd personally use 2 separate products to get the best results but I understand what you're saying.
Just about to use the Fallout remover on a new car that is 6-months old your video tells it as it is I was very suspicious about this Fallout remover but you have put my mind to rest this is the proper way to use it plus I like the warning only use it 6 to 8 months
I'm happy you found the video useful 👍. Fallout remover is like lots of products - if used properly it gives great results and is worth having, if used on a dirty wheel, for example how it is shown in many advertisements, then you'll be disappointed.
Yeah, be careful how often you use it as I find it can cause corrosion on unpainted brake parts etc.
Great vid, thanks for the upload 👍 I use mine in the same manner you did and got good results 👍👍😜😜 looking forward to seeing the next upload 😊😊
+thetraindriver01 that's because you're clever like me 😂lol.
I might do a mid week one this week but it's only a short one and to do with Porsches. I've change a few things around in this vid with the trailer bit at the beginning hope it looks ok. Thanks for continuing to support me and the channel. It really means a lot 🖒
thx very informational always wondered which to use first fallout remover or alloy wheel cleaner
Glad you found it useful!
What about bilt-hamber wheel cleaner it bleeds does that product cleane as well or it it the same
Does it matter if you spray or catch it on the brake discs?
No as long as the paint isn't too thick it will wear off pretty much when you drive the car
A lot of what you say is spot on, things do move on though and things like Bilt Hamber Auto Wheel do also contain some detergent now. That said i would always get as much muck and brake residue off before adding any kind of fallout remover, and agree that its not something you should have to do on a daily driver with average weekly mileage. A good look at the car and the wheel after a good jet spray off should tell you all you need to know
Can you use fallout remover on coated wheels like c5?
Yes, as most fallout removers are PH neutral, they should be safe to use on pretty much all coatings.
If you're in any doubt, you can apply some in a small area using a brush, or even cotton bud (q-tip), behind a tyre valve for example to make sure nothing adverse happens.
Always top videos! Keep them coming mate!!! 👍🏼
Thanks mate, that means alot!
Great video and very good points. I will follow your recommended method from now on. Thanks!
Nice 👌 😁
Question!, how is The best way to use this on The paint? 🤔
Iv orderd 6ltrs of it for under £24 delivered
Awesome! Just make sure you keep the lid on as it STINNNNKS!! 🤣👍
My Supercar Life they sent me 1ltr of the new one dragons blood as well
Excellent video, my friend!
Thanks!
Useful. Thanks 👍
Thanks!
Fuck yeah
Spot on!
Thanks!
Cheers!!
Thanks!