Free How to Rhino Community 👉 www.skool.com/howtorhino Rhino for Architects Course ✔ howtorhino.com/course/ Project Files 👉 www.patreon.com/posts/40003780
Hey HTR, Thanks for all the great tutorials first of all. As I am currently working on this specific tutorial, I have got stuck when it comes to the part where I am using the "Weavebird's Mesh from lines", as an error pops out saying "1.Wb processing exception- topv_count_is 2 or less! - Weavebird was unable to produce a valid result because of this". What might I have done wrong?
Hey there, great video: tnx for that. have question on weaverbird's mesh from lines: it is giving me the error saying that the figure has to low edge account. I followed your guideline, but it seams to be a problem there. have you gotten an idea what could be the reason for that? tnk in advance
Hi, thank you for the amazing tutorial, it is very helpful I had some difficulties with the expression, why is it red and how can I fix it, and how did you had the expression: Contains (x,"Closed")??
For the Weaverbird's Mesh From Lines (Weave Back), it is in red and keep giving me the message (1. WbProcessingException - topv_count is 2 or less! - Weaverbird was unable to produce a valid result because of this), would you please tell me how to fix it?
Hi Zezo, You need to do a slight modification within the "Cull Duplicates" component at 5:05. Go right-click on it and set "Leave one" from the dropdown menu.
8:52 How do you have an expression with just X value? I was able to follow along to the rest but that is the only part I can’t figure out. Could you please explain? Thank you!
Once you zoom in really close to expression component, you will see minus icon next to "y" input. Just click on the minus icon and "y" input will be removed.
Hi Khaled, you just need to switch data from A and B inputs in the component Vector2pt if you want to have vector in other direction or you can just add component Reverse Vector. Basically, in the input A you should place original point from the start of the definition and in the input B should be placed center point of each triangular panel. I hope this will help you.
hi .. .i was just following your video but i m facing problem ...my shift path is not giving 2 outputs as we see in your video....it is giving only one output...can you help me ...
Hi Rohan, for all of you who struggle to get the final outcome based on our video, we prepared project files of this and all our UA-cam tutorials on our Patreon page 👉www.patreon.com/posts/40003780
@@HowtoRhino dear sir, I didnt mean tutorial. I meant custom parametric gh templates for sale for specific structures. Or any one whom i can get them made.
![Grasshopper Tutorial | SOM Tower [Quick and Easy way]](http://i.ytimg.com/vi/H6cUyB_VqtY/mqdefault.jpg)
![Grasshopper Tutorial | SOM Tower [Quick and Easy way]](/img/tr.png)
Free How to Rhino Community 👉 www.skool.com/howtorhino
Rhino for Architects Course ✔ howtorhino.com/course/
Project Files 👉 www.patreon.com/posts/40003780
Hey HTR, Thanks for all the great tutorials first of all.
As I am currently working on this specific tutorial, I have got stuck when it comes to the part where I am using the "Weavebird's Mesh from lines", as an error pops out saying "1.Wb processing exception- topv_count_is 2 or less! - Weavebird was unable to produce a valid result because of this". What might I have done wrong?
@@Flavio_R did you find the answer? because I have the same problem
@@zezoalradih5206 Hi, try to see the settings in 'cull duplicates', if set on 'average' change it to 'leave one'.
@@Flavio_R, you saved me a lot of time! Thank you!
Hey there,
great video: tnx for that.
have question on weaverbird's mesh from lines: it is giving me the error saying that the figure has to low edge account.
I followed your guideline, but it seams to be a problem there. have you gotten an idea what could be the reason for that?
tnk in advance
Hi, thank you for your tutorial!
I would like to ask how I can make v3 frequency? It seems to jump from v2 to v4.
i love Grasshopper 🦗 that's amazing !!!
We love it too :D 🦗
how would we split the mesh of the outer frame? Rhino only recognises it as one mesh
Hello , thank you for the video , it's really helpful, i want to know how to get the first form of the video , the fluid roof please
Hi, thank you for the amazing tutorial, it is very helpful
I had some difficulties with the expression, why is it red and how can I fix it, and how did you had the expression: Contains (x,"Closed")??
Right-click on your "Expression icon" and rename it to (x) instead of (Variable x).
@@AF-100 still its not working!
Can you please help me to fix this?
So nice. Thank you again: excellent teaching.
You're welcome Marco! Thanks for your comment :D
For the Weaverbird's Mesh From Lines (Weave Back), it is in red and keep giving me the message (1. WbProcessingException - topv_count is 2 or less! - Weaverbird was unable to produce a valid result because of this), would you please tell me how to fix it?
Having the same issue here!
Hi Zezo,
You need to do a slight modification within the "Cull Duplicates" component at 5:05. Go right-click on it and set "Leave one" from the dropdown menu.
I had the same issue and I solved it thank you !!!
8:52 How do you have an expression with just X value? I was able to follow along to the rest but that is the only part I can’t figure out. Could you please explain? Thank you!
Once you zoom in really close to expression component, you will see minus icon next to "y" input. Just click on the minus icon and "y" input will be removed.
@@HowtoRhino still its not working!
Can you please help me to fix this?
Excelent...thank you "How to Rhino".
You're welcome Nelson :)
👍👍👍
can you clear out the inputs to the Vector 2pt, you rushed into it and i have the arrows going inside not outside, how can i flip it?
Hi Khaled, you just need to switch data from A and B inputs in the component Vector2pt if you want to have vector in other direction or you can just add component Reverse Vector. Basically, in the input A you should place original point from the start of the definition and in the input B should be placed center point of each triangular panel.
I hope this will help you.
hi .. .i was just following your video but i m facing problem ...my shift path is not giving 2 outputs as we see in your video....it is giving only one output...can you help me ...
Hi Rohan, for all of you who struggle to get the final outcome based on our video, we prepared project files of this and all our UA-cam tutorials on our Patreon page 👉www.patreon.com/posts/40003780
is this only applicable for a sphere? or can I use the same path on an open polysurface?
Unfortunately, this particular script is only applicable on a sphere.
Is there a website selling grashopper templates for specific structures like this?
Project Files 👉 www.patreon.com/posts/40003780
@@HowtoRhino dear sir,
I didnt mean tutorial. I meant custom parametric gh templates for sale for specific structures. Or any one whom i can get them made.
Hi, Could I ask you how many duplicates of lines do you end up with after the step at 5:08?
Hi Flavio! We end up with 480 items after using Cull Duplicates component.
@@HowtoRhino Thanks, I'm trying to figure out how comes my Mesh from lines won't work with those...
@@Flavio_R Me either. It can only work without doing flatten tree.
@@tracy_d Try to right click on to the Cull duplicates component, if set on "Average" change it to "Leave One". I found out that that, was my mistake.
@@Flavio_R Thx a lot! it works!
what if i want make half Sphere ?
Any tutorial for its 2d drawing and fabrication?
Thanks for the suggestion Khan! It's coming in the future. It's on our list :D
The most basic grasshopper skill is how to change default colour of groups and make it transparent white...
muchas muchas gracias
likee
You're welcome!