Learn to use your tools man. Using the jaws of your vice as an anvil while the vice has an anvil built in, then immediately holding the piece with your hand for grinding was my breaking point.
hey man, you're off to a good start. stay on that grind and keep honing your craft (both the actual restorations and the filming side)! would have liked to hear the siren really cranked up but I realize that's probably not feasible if you've got neighbors :P
Не просто по внутренней обойме, а по резьбе вала! Причем, предварительно покрасив посадочные места! Это треш, конечно. Про рихтовку прямо по "ушам" ограничителей, я уже молчу... зато все что не нужно отпескоструено 😀
Geez, I know right. I just switch off or mute it if its interesting enough . I like Colin Furze but he plays too much rock and heavy metal over his videos.
@@akaisha0000 ⚠️ God has said in the Quran: 🔵 { O mankind, worship your Lord, who created you and those before you, that you may become righteous - ( 2:21 ) 🔴 [He] who made for you the earth a bed [spread out] and the sky a ceiling and sent down from the sky, rain and brought forth thereby fruits as provision for you. So do not attribute to Allah equals while you know [that there is nothing similar to Him]. ( 2:22 ) 🔵 And if you are in doubt about what We have sent down upon Our Servant [Muhammad], then produce a surah the like thereof and call upon your witnesses other than Allah, if you should be truthful. ( 2:23 ) 🔴 But if you do not - and you will never be able to - then fear the Fire, whose fuel is men and stones, prepared for the disbelievers.( 2:24 ) 🔵 And give good tidings to those who believe and do righteous deeds that they will have gardens [in Paradise] beneath which rivers flow. Whenever they are provided with a provision of fruit therefrom, they will say, "This is what we were provided with before." And it is given to them in likeness. And they will have therein purified spouses, and they will abide therein eternally. ( 2:25 ) ⚠️ Quran
Nice work. We're gonna need a lot of these things for the upcoming war between man and machines. I don't know about you, but I'm rooting for the machines.
a good job, no doubt about it. but if I can some advice. you have a good set of tools, but I highly recommend that you both attach them better to their mounts (the lathe moves a little too much, for example) and use them more safely. I say this for your physical safety ... otherwise we won't see many videos of your work. best, Alessandro
There is an impeller, not sure if that is the right word, at 5:40. It is what is turned when the device is cranked. It has vanes and openings around its edge. It fits closely into a housing with similar opening that line up, but with slightly different spacing. When the impeller turns, the air is forced through the openings, which are rapidly opening and closing, causing the characteristic whir-to-scream, speed dependant. I think.
You know, now that I look at it his thumbnail pics look just like his, with the wood table. But My Mechanic doesn't dirty up his projects with the fake mud like these guys. I'm only a minute in and decided to check the comments to see if anyone else noticed it's another fake mud restoration. But your comment was spot on. NO ONE can compare to MM. He's phenomenal. That Chip guy that does Tonka trucks and antique toys like that, he's really good too.
Until this day, I thought that a part of the hand-operated sirens was making a sound when the fan hit.However, as far as I understand from the video, the flow of air produces a sound as the fan rotates. At least I think that's the case.
The fan only creates an air flow, but in order to get a sound, you need to interrupt this flow very often with a curtain. Rectangular holes on the fan housing and on the fixed cover of the siren, when rotated, "crush" the air flow. This creates sound.
@@alonsobrosmann4300, there is one little trick. The number of holes on the fan housing and the siren must be different - otherwise there will be no sound.
Замечательный прибор, издающий звук сирены, я правда не знаю, как он на самом деле называется, но мне очень нравится звук сирены, сразу вспоминается Silent Hill. Спасибо 🙏 вам огромное, за реставрацию такого интересного прибора. 👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
I the only one calling bullsh*t?? The exposed metal from where the paint is chipped isn't rusted at all and the dirt on it looks fresh just like other videos he posts. I'm not saying he didn't improve them from the state they were in at the beginning of the video but I am saying the paint has been freshly chipped and it looks like he just threw it in the dirt and let it dry before the video. I'm blocking this channel so these fake restoration videos don't show up on my feed
![1900s Door Mortiser [Restoration]](/img/n.gif)
That cat was like "If that's the new dinner bell, I ain't hungry".
Got that “Yeah uhhh lemme just starve to death real quick so I no longer have to hear that sound” feeling
OMG THE KITTY IS SOOO CUTE
Ever heard of masking tape? This has to be one of the most half-assed restoration jobs I've seen.
Very good video. This is the first time I’ve ever seen the inside of a Siren!
Fun to spin dry bearings with air, if you don't expect a long lasting bearing.
Far from the tidiest restoration I've seen on UA-cam. The drilling out on the lathe was painful to watch!
Great
Lol
Cross threads on that nut was nice touch
By the way... you ruined those bearings, never blow air through bearings, just repack new grease in.
Never blow dry bearings they will explode!!...not a joke!
🤷🏼♂️
Learn to use your tools man. Using the jaws of your vice as an anvil while the vice has an anvil built in, then immediately holding the piece with your hand for grinding was my breaking point.
hey man, you're off to a good start. stay on that grind and keep honing your craft (both the actual restorations and the filming side)! would have liked to hear the siren really cranked up but I realize that's probably not feasible if you've got neighbors :P
0:06 The paintbrush marks in the mud are a little insulting...
Wdym
please do not blow bearings very very dangerous
How so? What would happen?
Well those bearing will not last long
Очень странно - забивать подшипники в посадочное место, стуча по внутренней обойме🤔🤔🤔
думаю в школе на уроке труда дети сделали бы это лучше чем он
Подшипники разбил, резьбы не прогнал, то что выровнял опять помял, это не восстановление
Like
Не просто по внутренней обойме, а по резьбе вала! Причем, предварительно покрасив посадочные места! Это треш, конечно. Про рихтовку прямо по "ушам" ограничителей, я уже молчу... зато все что не нужно отпескоструено 😀
Thanks for no music so we can enjoy the sounds of the workshop
Geez, I know right. I just switch off or mute it if its interesting enough . I like Colin Furze but he plays too much rock and heavy metal over his videos.
good thing thats not an in use functioning unit, cuz you just fried those barring's, u NEVER hit barring's with air like that
Excelente trabalho
Good Restoration and Video
Excellent work!
Congrats!
This was a little like watching a kindergarten art class.
Where on Earth did you go to kindergarten!?
Not everyone have access to high end tools, and experience is a matter of time.
@@akaisha0000 ⚠️ God has said in the Quran:
🔵 { O mankind, worship your Lord, who created you and those before you, that you may become righteous - ( 2:21 )
🔴 [He] who made for you the earth a bed [spread out] and the sky a ceiling and sent down from the sky, rain and brought forth thereby fruits as provision for you. So do not attribute to Allah equals while you know [that there is nothing similar to Him]. ( 2:22 )
🔵 And if you are in doubt about what We have sent down upon Our Servant [Muhammad], then produce a surah the like thereof and call upon your witnesses other than Allah, if you should be truthful. ( 2:23 )
🔴 But if you do not - and you will never be able to - then fear the Fire, whose fuel is men and stones, prepared for the disbelievers.( 2:24 )
🔵 And give good tidings to those who believe and do righteous deeds that they will have gardens [in Paradise] beneath which rivers flow. Whenever they are provided with a provision of fruit therefrom, they will say, "This is what we were provided with before." And it is given to them in likeness. And they will have therein purified spouses, and they will abide therein eternally. ( 2:25 )
⚠️ Quran
I guarantee you would have smashed your finger with a hammer the first couple swings. Fact
Great technique on the bearing installation.
😬
P-50 siren 🪦 RIP
Świetna jest ta zrobiona robota pozdrawiam twórcę tego filmiku mile i serdecznie 👍👍👍👍
Комментарий в поддержку канала и ролика, а также труда мастера.
goodjob! マンガでしか知らないが、こんなタイプのもの
初めて見ました :))
Well done
Great job, and beautiful cat... who apparently doesn't care much for your siren!
I dono how i feel about this video,😬😬😬 maby go watch some videos and learn a few tips and tricks
é uma sirene legal
4:12, when you haven't cleaned your ears and I really long time.
P-50 1$
It looks great and you did a wonderful job restoring it also!!
Enjoyed your video and I gave it a Thumbs Up for the support of your channel
Nice
Please wear safety glasses.
Thank you for rescuing a piece of history.
You're a really good grinder
one like just for the cat 🙂 and one dislike just to scaring him!!!
Сразу видно чувак русский! Продолжай в том же духе! Оч. Интересно!
Nice
2:14 Thanks for giving me a black eye lol
Very good restoration project 🖤
Perfect restoration and work mate ! Keep going !!
Nice work. We're gonna need a lot of these things for the upcoming war between man and machines. I don't know about you, but I'm rooting for the machines.
Great job👍
a good job, no doubt about it. but if I can some advice. you have a good set of tools, but I highly recommend that you both attach them better to their mounts (the lathe moves a little too much, for example) and use them more safely. I say this for your physical safety ... otherwise we won't see many videos of your work. best, Alessandro
Nice
Nice restauration. Sounds useful. Sadly.
*Restoration, with gloves, I already know the end result will be garbage*
Nice job you did restoring that siren. It looks much better than before. It works like a charm, too. Great work.
When I see a pattern in the mud all over an object that indicates it was smeared on is when I lose respect for a "restoration" channel.
Satisfying
poor fluff ball😨 but great video
It's not My Mechanics level but it's ok. You've got yourself a new sub. Cheers from Australia 🇦🇺
You should sanding before painting for removing rough and sharp edge
Hola
Дети в первом классе сделали бы это лучше ,не надо позорится и выкладывать такое в интернет
Good job but, please, put a guard on the angle grinder!
Great
Good ii boss 👍👍😊😊😍
Really nice job! Liked your studio audience as well.
I enjoyed this video keep on making them and they will be even better.
I think im getting a siren soon. Apparently its a hand crank siren with a motor slapped onto it
Edit: it's a Model A
"Scramble! Scramble!" The cat scrambled... 😉
Maybe Manual Siren Machine ? Very Difficulty
Really cool. How does that thing actually work? I mean what produces the sound?
There is an impeller, not sure if that is the right word, at 5:40. It is what is turned when the device is cranked. It has vanes and openings around its edge. It fits closely into a housing with similar opening that line up, but with slightly different spacing. When the impeller turns, the air is forced through the openings, which are rapidly opening and closing, causing the characteristic whir-to-scream, speed dependant. I think.
Think playing card in a bicycle spike, but the card is air
Painful to watch
Just my every freaking day
Aww, you frightened the cute shop supervisor! Nice restoration, though.
UA-cam ADVERTS ARE A NUISANCE AND SHOULD BE COMPLETELY BANNED PERIOD
COOL 🤙🤙🤙🤙
Right on
Next one who tries to copy MyMechanics. Learn to use right tools and than come back. Risible
You know, now that I look at it his thumbnail pics look just like his, with the wood table. But My Mechanic doesn't dirty up his projects with the fake mud like these guys. I'm only a minute in and decided to check the comments to see if anyone else noticed it's another fake mud restoration. But your comment was spot on. NO ONE can compare to MM. He's phenomenal. That Chip guy that does Tonka trucks and antique toys like that, he's really good too.
At 2:30, you think he should get a longer screwdriver so he can reach the screw? 🤣
Personally, I liked the brush marks where the mud was applied to the outer casing.
😐
Great job! You've earned my subscription.
Just a note: latex gloves won't last long with petroleum-based products, such as oil and gas. Nitrile is the material you need.
Cool
Nice work,did not know that sirens depends upon a built-in air blower...
Love how all that loose dirt end up on the item to be restored...lol
Nice work. But od green would matched original color
Until this day, I thought that a part of the hand-operated sirens was making a sound when the fan hit.However, as far as I understand from the video, the flow of air produces a sound as the fan rotates. At least I think that's the case.
The fan only creates an air flow, but in order to get a sound, you need to interrupt this flow very often with a curtain. Rectangular holes on the fan housing and on the fixed cover of the siren, when rotated, "crush" the air flow. This creates sound.
@@smuter-24 thank you, now i understand how it works
@@alonsobrosmann4300, there is one little trick. The number of holes on the fan housing and the siren must be different - otherwise there will be no sound.
Forbidden Nutella...
the paint was crap
I'll be honest, i thought you needed to swing it like a war hammer to play(?) it
I was thinking of guffawing like the Riddler; also going MMMHEHE UHHUHHUH like Beavis and Butthead. About testing the old timer air raid siren.
😂🤣😅 Hahahahaha I remember after the war they works great and we have had one on the roof of the house; what have happen to them who knows?.
Замечательный прибор, издающий звук сирены, я правда не знаю, как он на самом деле называется, но мне очень нравится звук сирены, сразу вспоминается Silent Hill. Спасибо 🙏 вам огромное, за реставрацию такого интересного прибора. 👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
Пожалуйста.
Приезжай в Украину тут наслушаешься сирены сколько влезет
World war 3 preparations 😂😂😂
Not exactly a siren, so much as a zombie's moan. Still, it works.
🙏🤗👍🇻🇪
I the only one calling bullsh*t?? The exposed metal from where the paint is chipped isn't rusted at all and the dirt on it looks fresh just like other videos he posts. I'm not saying he didn't improve them from the state they were in at the beginning of the video but I am saying the paint has been freshly chipped and it looks like he just threw it in the dirt and let it dry before the video. I'm blocking this channel so these fake restoration videos don't show up on my feed
Оооо це мені треба
👍👍👍👍👍👍
Why recondition a siren? You gonna call in the chickens? Or do you know something about air raids in the future?
Поддерживаю любовь к желтому цвету и завидую вашему природному спокойствию- меня раздражает, когда мои средства производства трясутся! Сильно
Ну вообще то сей инструмент был выкрашен в красный 🟥 , а не жёлтый🟨.
Денис, я не прибор имела ввиду. Посмотрите внимательно видео автора- в мастерской много желтого цвета в разных предметах.
Potboiler, quickie...
so bad