New Knives for the Week of July 11th, 2024 Just In at KnifeCenter.com
Вставка
- Опубліковано 4 сер 2024
- Fixed blade fans rejoice, there’s plenty to choose from this week! Plus, an exclusive Liong Mah, EDCs from Kizer, Kansept and Maserin, as well as a… tactical slipjoint? Check out the latest knives and EDC gear from KnifeCenter here: kcoti.com/4cZOfTh
The availability of custom, sprint run and limited edition knives are often limited to stock on hand. Check the links below for the latest availability and prices.
Featured Knives
00:00 Intro
00:16 Liong Mah KUF 3.5 MagnaCut Exclusive: kcoti.com/3xJlRpx
02:56 Tactile Knife Co. Chupacabra Seasonal Sprout: kcoti.com/3WfQQ5M
04:51 Maserin 502 Power: kcoti.com/3xGOKTi
07:36 Maserin 371 W2: kcoti.com/462U1AZ
09:34 Kizer SCUTTLER and Cobbler: kcoti.com/4cYImps
13:04 Kizer Groom: kcoti.com/4cVwTH8
14:48 Kizer Smolt: kcoti.com/4cNpoSu
16:52 Kizer Dogfish: kcoti.com/4cBj0y0
19:10 Kansept Pretatout: kcoti.com/3Llerfd
21:46 Kansept Little Main Street: kcoti.com/4cXWQFO
23:08 Custom Knife Factory Rotten Design Evo-T: kcoti.com/4cEC5iW
25:26 TASknives Custom Invaderling: kcoti.com/4cEC92a
27:27 Reate GTR: kcoti.com/4cEkt6E
30:06 Boker The Escort: kcoti.com/4cHtvA0
31:38 Boker Magnum Collection 2024: kcoti.com/4czOhBb
33:51 Takumitak Knives: kcoti.com/3S5zDtj
Slightly Larger that Average Patches: kcoti.com/3IXcovQ
Need a Tek-Lok? Get them here: kcoti.com/2MaMxqJ
#NewKnives #KnifeCenter
Social Links:
/ knifecenter
/ knifecenter
/ knifecenter
Sign up for our newsletter:
kcoti.com/2LkuXg7
Check out our KnifeREWARDS program for free money to spend on your next knife: kcoti.com/knifeREWARDS
Browse our full catalog:
kcoti.com/KnifeCenter - Навчання та стиль
"tactical slip joint" is like "lowered off road vehicle"
Okay, and taking nothing from that, but non locking folders that have this much going on and give one an ability to carry without breaking the law is something the world can use more of: choices!
Yeah, the thing that freaks me out about the TASknives Invaderling is not the deployment speed, the blade could still deploy quick with the thumb stud, but having a non-locking blade in a tactical knife?? Great opportunity for the blade to fold in on your fingers during an "emergency" situation, terrible design.
Plenty of slipjoints have been used historically in tactical circumstances. Not ideal, but very usable, depending on the design and the user.
@@OldBadger1 Fair enough, but trying to figure out why it would be designed that way as a "tactical" knife. Are locking mechanisms banned anywhere? and if so, why not just go to a fixed blade for tactical use, even a fixed blade with a smaller blade would be more useful in a tactical situation.
@@chrisdean8235I live in that kind of place. Locking knives and fixed blades are a big no no out of uniform. You can usually get away with a small multi tool. Adaptability is the key.
Alternatives? Languiole, Boker plus xl, Sog stout, Spyderco Uk Pen knife to name a few. Would I rather carry my Spyderco Mil or Esse 3 Mil. Sure.
I train some FMA, my trainer is a filed down UKpen. The deployment and use are challenging but can be done.
There are a few more "tricks" but I save those for fellow practitioners 😊.
By the way I have a CCW 😂.
Thursday is my favorite day of the week, first DBK and than Knifecenter. 👍
Exactly what I tell everyone. Oddly enough I was able to score Falkniven NL5 idun in CoS steel from KnifeCenter last week, but it got on my radar from DBK and after decades, I have one from the Northern Lights series, finally!
Don’t forget the Mr. Bixby and the apostle P knife sale 👌
@@JosephOlson-ui2pg sweet!
@@adriaandoelman2577 thanks! I used up a lotta luck scoring that one!
How do you measure the blade length? You don’t - it’s your arresting officer’s job 😂
Yeah if you live in a shit place
I know if I buy the Liong Mah, the Magnacut Spydiechef is gonna come out next week...
Lmao
Good one!
It’s all a game…. They call their game; marketing. Even the knife hobby has become a JOKE! only a handful of real knifes left… the rest are spoiled and feminine…. Everyone I know is sick of the games… being played… on the buyers, etc. I’m telling anyone now… the knife business now sucks… but the best knives are being made at the same time !!! It’s the libtards…the fear factor … can’t even talk bec afraid of reprisals!!! Take that to the bank… that soon will be closed forever!
You should make that sacrifice for the rest of us!
Thanks, David & Thomas.
that boker magnum 🔥
It's expensive but damn it if that Evo t isn't a work of art
I wish that Kizer would a non coated and full micarta scale version of the small fixed blade. I’ve never had any of my 3v rust
I had an email today from Civivi and it had a non coated fixed blade with nickel silver and micarta! Leather sheath.
I kinda like how the KUF looks like an integral but actually isn’t. Maybe it’s not quite as strong as an integral, but you get all the other benefits while still being able to disassemble it fully for cleaning and maintenance. Tinkering with my knives is definitely of mine, so I gotta be able to take them apart fully lol
Holy cow, $700 for Nitro-V on the TASKnives? Nothing inherently wrong with Nitro-V, but for that kind of money I expect a premium steel, not a budget steel.
😂 agreed
HE DID SAY $700......WOW
It's not that uncommon with custom knives more often it will be AEB-L which is an almost identical steel but isn't as common so doesn't really have that budget stigma
I immediately checked to see if my hearing aid batteries were dead. @@TJB1510
These are also custom knives
Thanks! Finally a good grouping of affordable but still beautiful knives with decent specs. Lately, Benchmade seems to think they can charge 450 bucks for lower end materials, lower than some items shown today.
the evo reminds me of the strider.
The supressed laughter at sUrVivAL sPeAr got me lmao
This is the first I’m hearing about Maserin knives and I have to say the 502 and 371 are a couple of sexy knives.
They've been around since 1960 - when I was last in Germany I saw them in all the shops. Yet another knife company based out of Maniago, Italy.
Very well made, very well designed knives. I have a couple of older ones in my collection.
@@stratobungle thanks for the info! I look forward to adding a couple Maserin’s to my collection. About 3 or 4 years ago I was buying all my knives from the consortium based in Maniago. I jokingly refer to it as my Italian period!
@@OldBadger1 thanks for the info. There’s something about the crowned spine on the Italian knives that really appeals to me. I’m looking forward to adding a couple Maserin’s to my collection.
the kizer smolt is recommended but its a 3 finger handle....no prob if you put some paracord loop to put your pinky thru
Oh Damn! I SO wanted the TASK one and it sold out too quick! RATS!!!! That one is RIGHT up my alley! Strangely enough the two plain jane Slip joints i ordered in SPY27 and Magnacut back in November finally shipped, BUT this one would have kicked their asses! I regret not watching the weekly episode of New Knives as soon as possible when I miss out on a model dialed in for my tastes!!! Can't help being at work when it airs.
Any idea of when the Cold Steel FM1 is coming out? Can’t find it anywhere
Is it a coincidence that I always get paid on Thursday too??
Terribly convenient! You're a lucky one
The first one is very reminiscent of the Spydiechef.
Hi DCA! You are back!
Love those Bokers .
David C. Anderson you could sell wipe in the rain tolit paper!😂😂😂
you missed the Jack Wolf release tomorrow!
Dude the at background music just sets the mood haha
The Kansept pretatout is $75 with 154CM and nice micarta.
Someone in the staff is acting cute by lining up the Escort next to the GTR.
??? I don't get this
The Jeremy Clarkson meme was great!
The SENTINEL & The ALERT badass. I've seen some reviews on them and I really want ine.
Great to see you Thomas.........................lol. You as well David!
The Kizer Torbe'? Fixed blades definitely have the design language of the Civivi Keplar he designed. Dude's got a swag all his own. 🎨 The Task Tactical slip joint is a work of 🎨 art! 🔥
Yes!!! Hardness being stated. Bringing it, Dave!!!
How is the super lock different from the shark lock on the AD20.5?
There is a tiny bit of difference in details, but yes, shark lock is a knock-off of snecx's super lock. Snecx just chose not to patent it, so everyone could use it.
Think the chupacabra is using a tactile knife co modified version of the snecx lock
Any word on the Microtech Atreus and will you guys be getting any in
Why do companies keep insisting on using ambidextrous lock systems but refuse to add left-handed pocket clips?
I can’t keep track of how many knives I have not purchased because of this!
All Leeks have slick handles. We need a KnifeCenter exclusive: Kershaw Leek with Magnacut steel and with a handle that is not slick.
I took a look at the Takumitak knives earlier in the week from an email. They don't look badly made, but outside the Takumi model, they all have that "Gas Station Tactical" or "Mall Ninja" vibe to them that doesn't do it for me personally. I also tend to be cautious of D2 fixies that are over pocket-carry sizes since the toughness really comes into play at that point.
It might also have to do with the ENORMOUS "USA Design" print and downplayed manufacturing origin that rubs me the wrong way (M-Tech does the exact same thing on all their worthless junk, so it's hard not to make that association).
The first knife, Liong Mah KUF is a bit of a head shaker. Why put MagnaCut in a "kitchen utility folder", just because its the hot "super steel" at the moment?. Also, I believe any folding knife is a very poor choice for kitchen duties when all the food bacteria could just get trapped in the pivot area, better to stick to fixed blades for culinary work.
You don't have to use it for kitchen purposes
David, is there any appreciable difference between the Snecx Superlock and Andrew Demko's Shark Lock? I have to admit, they look like exactly the same thing. Is it like comparing the Spyderco Compression Lock on the Smock and the Top Liner Lock on Vosteed's RSKAOS? I haven't actually held an RSKAOS yet, but I was lucky enough to be one of the few who got the first run of Vosteed Raccoons with the top liner lock (I notice the knife is marked "Delayed by Manufacturer" now) and in terms of difference between the lock systems, I can't see any difference between my Smock and my Raccoon. I can't help but wonder if it's the same with the Chupacabra and my AD 20.5.
If they are 'Concept' Kansept should be Khansept and we would get it correct.
Can you add the prices on screen with the name of the knife
@@shane_si2642 no... Because prices are subject to change
They won’t because prices change too much.
@@paultheleftythey say the price.
Can y'all show the UKPK Magnacut for next week? You've got them in, just want to see a bit of closeup
I just picked up two new knives from you folks, great service and fast delivery. But, I have a question; Why is it that knives don’t come with sharpening instructions including angles? Is there a resource where this info can be found in one location? OK, that’s two questions.
12:54 is that the tip of the blade sticking out of the sheath?
The bad thing about these prices is when we're rewatching these videos 8 years from now we'll be amazed at how inexpensive knives were "back then".
What's up with the Houge Knifecenter exclusive. The K320 droppiont. Is the knife recalled or something?? The review says it's not closing all the way. Is it ever coming back in stock??
I am kind of surprised that DCA called that Liong Mah knife a "modified sheepsfoot" rather than a "modified lambsfoot" considering his Pocket tango 2 was supposed to be a lambsfoot blade. (Even though the website calls it his favorite blade shape... a reverse tanto) 😅
Does anyone know why Kizer persists in using D2 for nearly all of their fixed blades? It's not like they don't have plenty of 154cm, 14c28n and now Nitro-V laying around.
Edit: yes I realize the Smolt is 3V, but I want a stainless steel on a fixie since I'm more likely to use it and put it away wet and dirty.
I dont think it would be unfair to say that Reate knife handle is busy. Possibly obnoxiously busy.
DAC- if you click on the link for the Tactile Chupacabra it says "Discontinued" ??
Unfortunately, they sold through before we had a chance to post this video. --Thomas
The link for the "Tactile Knife Co. Chupacabra Seasonal Sprout" says it is discontinued and no longer available???
sold out. thats a popular one. gotta be fast
@@mcsquirglethanks for letting us know. I like it when there's help to understand
I like the music in the background!👍😎👍
23:15 did Johnny Rotten design it? 😅
Anybody know anything about Kershaw 7900CF Launch 7 AUTO Folding Knife 3.75" Stonewashed MagnaCut Clip Point Blade? It's on closeout and looks cool but no reviews.
Those fixed blades are awesome and 140 bucks for that Boker Magnum is a freaking bargain.
Listings online have the rockwell hardness i hope.
They do if the manufacturer provides it.
masserin knife, but I HATE billboarding on the blade. put it on the pivot // and CKF went too small, and still charge TOO much for knife made in China, assembled in Russia? there's a guy on Bladebinge that has been trying to sell his brand new CKF for months, and had it as low as $500 - not a single taker.. too much for China knife
BO02MAG2024: Magnum Collection 2024, is there a camp kitchen version available?
I’m intrigued by the KUF but I’m turned off by the thickness of the blade and the opening hole, neither of which are ideal for kitchen use.
I swear all those Kizer came out months ago
That knife called power with N6 90 steel you gotta be crazy $170 no way who do they think they are Benchmade lol
This guy has got to be the biggest “knife fudd” I’ve ever seen lol. Three things you can always guarantee to hear , “slightly larger than average hands”, “choke up on it”, “widdle around the campfire”
W Demko Knives!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
"liiiiiiittle bit trickier on this one to pull out, because of the, uh, size"
Too many companies asking too much money for outdated lock types and steels these days. To say that differently, alot of value to be had with modern lock types and steels these days.
I wish the 3v fixed blade was larger. Not much just large enough for a full grip. 3 or 3.1/2 doesn't work at all for me.
We're not in Kansept anymore toto.
Is Leona Mah from Idaho?
You are joking right?
Tell yourself, self don’t buy that $300 KUF you’ve been wanting, tell yourself, self don’t, damn I just bought it 😂
Cowabunga.!
Wait, I've had the smolt and the groom on my cart on amazon for a couple of months now. Those are not new.
I've had mine for over a month. There are reviews on here almost 3 months old. They must not be high up on the manufacturers vendor list.
Dealers don't necessarily get the knives immediately sometimes the company will sell it before the dealers get it
Boker The Escort is like an alternative if you like Kershaw Leek, but want more handle and a complexity to the handle with a different blade profile. As so many don't want assisted opening it's got that going for it too. But a slim metal handle knife in the style of Leek
🔪👍
Please bring back Heretic Under ripe STABANANA
A knife that costs over 200 bucks is called a Gun 😂😂😂
As a knife NUT who cooks ALOT I do not get the folding kitchen knife unless camping.....more area for germs and harder to clean, bad combo
Honestly that’s what I was thinking. Not to mention the high price of knives like the spydiechef that just make them a worse option than a normal kitchen knife.
The chupacabra has already been proven that black fails and the $300 utility kitchen knife you know you mentioned that the lock is not very secure really $300 wow
Looks like im sticking to my benchmade this week 🦋
I wish that knife companies would make more lockback knives. I feel that lockback knives are safer to use than other knife locking systems.
Yoinks 700 for a cnc slip joint and nitroV.. People gonna have a field day with a 700 knife having nitroV with that budget steel stigma... they should have used AEB-L so people won't flip out as bad because it's not used in the budget knife world so most ppl won't instantly associate it with being a budget steel.
The Kuf looks nice, too bad it produced from the mind of a bully!
GO GET THE CALIPER..?..
Because everybody need to be able to reverse flick their kitchen folder. I do believe we're getting a little out of hand when we need a kitchen folder. Then again that's just me. Probably everybody else wants to spend a fortune on a knife that won't do the work of a $40 kitchen onife
A few… of the knives shown here… are over the top … jokes!
Knifecenter is gonna have to start offering financing options.
That Chupacabra was SO close to being my next knife purchase but they _RUINED_ it by making the bolster so your finger can't get right up on behind the blade. This is what happens when we have "designers" who do things for looks but never think of function because they're only real experience using tools is talking about them on the internet with other people who don't know what they're doing.
David getting tired of the dummy knives… but living the good and great knives. It’s easy to see …
DCA didn´t like those Takumitak Knives at all.... you can tell!
Glad DCA is back. Seth is definitely out of place doing knife videos or even talking while in camera. I love KNIFECENTER… DUMP SETH or shift him to the back anywhere he can fit it.. replace him because DCA is great and Seth is truly something … what!! He can’t do videos… It’s even hard to watch him struggle in ALL of his videos. Or… stay girly… and act nervous… up to you Sir.
You could just not watch the videos with Seth and spare us your personal attacks and unsolicited expert business advice for knife center.
I think you need to start doing more up close shots of the knives.Because I watch on a small screen on my phone.
If it's possible
🤨 Boker wants $140 for a 440 stainless steel from China? GTFOH!
You're going to tactical your fingers right off your hand with that thing😢
It's July and KC is just now showing the Rotten Evo T as a new knife? I bought my 2 Rotten Evo 4.0 (barked DLC with DLC S90V blade) on Feb 28th from NC Blade. I also bought the Zircu-ti/Damasteel version 2 weeks after. Tbh, I'm surprised any of the Rotten Evo 4.0s and 4.0Ts are even still available considering they've been out for almost 6 months now. In all honesty, the Evo 4.0 sucks, especially for how much they cost. I know I was highly disappointed with both of mine.
What are you talking about?
@@davidgarrett5671 I think he’s talking about the fact the Evo has been out for awhile now and that he doesn’t like them, especially for the money. What did you not understand?
Whoever designed those two Maserin knives, and the person who decided to move forward with them really need to think about a different profession. I wouldn't pay $50 for either of them.
Hey DCA,
Please stand up,
Sing for the moment,
I love the way You lie,
I need a doctor... I need a doctor....
Tactile is terrible. First of all that’s way too close to the WE/civivi vision. Second, they use all these ambi locks and then don’t put a reversible clip on it. Made in America but act like a European company. That’s why Benchmade dominates all of them in revenue.
Watch the video smart guy. it's a collab with snecx who designed the visions. Listening is key.
Dave, the knife center you gotta stop making excuses for these knife companies seriously you need to quit. They are getting way out of control.
I guess Benchmade greed for price gouging the crap out of us has spread to other knife manufactures
Thats just a shark lovk clone 😢
A bit of looking shows that the Super Lock actually predates the patent for the Shark Lock. I don't think there's any ill will between Demko and Snecx, and more options are always good.
🙄 absolutely nothing about that lock says shark lock.... Doesn't even look like it
And if you disassemble the knives you will see they don’t work the same.
STOP WITH THE D2 BLADES!!!!!