MPLS L2VPN || Detailed Explanation & Step by Step Configuration || Wireshark || CCNA & CCNP

For feedback please write to [e-mail]
MPLS Video 1 (Overview) : • MPLS || Multi Protocol...
MPLS Video 2 (Lab Session) : • MPLS LAB SESSION with ...
CCNA & CCNP Video Playlist : • Networking Basics Expl...
MPLS L2VPN provides a Layer 2 connection between the two device and forms an Point to Point tunnel over the MPLS network.

[@hariprasadkannan5060]

Great video Sir.. could you please put a video on EVPN , VPLS.

[@piotrwikarski9401]

Great video, thank you. You got me confused at the end when I though you wanted to catch icmp from SiteA to SiteB over the mpls and your wireshark showed only rip multicast..? So my question is: would that be possible to see communication other then rip multicast (for example: telnet, icmp, ftp, tftp) between SiteA and SiteB ? When using whireshark to see the traffic would I be able to read it in clear text if protocols like telnet are used?

[@JKRowl]

Thank you sir, this was brilliant!!

[@stephen8253]

Great video, time to try it for myself 😁

[@gauravenjoy]

Well explained, but what is the reason of
1. High latency between site A and Site B.
2. Is this method (L2VPN-Xconnect) used for P2P only or can be used for Multipoint as well.

[@kk61105]

Very well explained 👍👍

[@RishiRap]

Towards the end with wireshark capture, ICMP was right there in plain sight to demonstrate the details but somehow you zeroed in on RIP pkts which of course won't show any ping traffic. Not sure, why?

[@arjunprs]

If we don't need loopbacks in site, will l2vpn work even without a routing protocol on site?

[@DileepKumarMB]

Good one, thanks.
If you have created the video for "MPLS L3VPN", please provide the link here. :)

[@santhoshkumar-vp2mi]

Hi bro can u do same kind of video for L3 VPN also….
If u have already done please post the link

[@RishiRap]

Label 200 is shown in packet capture towards the end but not shown in LFIB of SiteA-PE1 router. What's the reason for that, pls?

[@abhishekmurali5]

Could you please help me here, I got the below error when I issue the Xconnect command on the PE- Router.
" MPLS encap is not supported on this circuit "

[@anjilkhadka3633]

same issue

[@networkengineer2734]

Make video on VPLS and VPWS
Difference between them
Please

[@GPMTechTrain]

Yes sure

[@AgentMurphyx]

Very well explained!

[@rferriolo]

Good job. Everything worked beautifully. Looking at the MPLS Layer 2 & Layer 3 headers in Wireshark, there doesn't seem to be a way to determine which one is layer 3 and which one is layer 2 unless you go back to the command line...

[@pravinyogi5981]

Thanks sir

[@beyondthehorizon7778]

please explain the commands in brief sir

[@AbhishekSingh-ky9jc]

which router image is used for this lab ?

[@refaiabdeen5943]

Cheers Mate.

[@sandeepabbadivts8387]

how to make vpn between backbone pfsense firewall and remove client using mpls vpn

[@anjilkhadka3633]

MPLS encap is not supported on this circuit I got this error

[@ravi12ver]

thanks a lot!

[@VenkateshSudha]

How Internet is provided in L2 VPN

[@SONSONADAVITH]

May I have basic example of MPLS L3 VPN?

[@GPMTechTrain]

Mostly it will be used in WAN service provider network. As you are looking for an example, consider you have two different branch offices operating in different geographical locations, this links will be used to connect both of them.

[@SONSONADAVITH]

@@GPMTechTrain Yes, I'm looking for an example with two different of branch A&B.

[@mikkio5371]

Thanks

[@JoelGO20]

Could you share the file please?