I first worked with Festool tracksaws in 2000 in after moving to Berlin, Germany helping a friend remodel an apartment. Very impressed with the quality and ease.
I invested in a festool plunge saw just over a year ago. It has absolutely revolutionised the finish to my work. An amazing piece of kit & the best on the market. 👍🏻
I love that your first two cuts with the jig saw were used to remove the bulk material so there would no be tear out. I would have foolishly tried to hold the cut off in place and make only two cuts with my jig saw. I learn so much from watching your videos (even the shorts). Thanks!
I've seen them use this cutting guide dozens of times, just like I've seen your videos dozens of times. However, no one has ever shown how. Is it magic!
you getting the new one with the scoring blade I am getting it for sure with the digital table saw I have finally broke down and decided to get that table saw
Man do i love that festool. I cant count the number of times that puppy has saved me from additional work. I literally cannot count the times. Cause i don’t have one. Cause I’m broke. And i want one.
Woof. That's quite a bench. It's pretty big fun watching you enjoy it all! Really very nicely done, Bravo! One wonders how much time it takes to produce a short... Can't be easy.
All I care about is the simplest action of cutting most of the floating falloff off first. Amazing how simple, obvious, and often never done that action is.
I love your videos! Nice to see all the joints you make, the cuts and tools you use! Do you have a video explaining how to measure and cut correctly? Especially the marking and then sawing on or next to the line? To be able to saw precisely?
Thats a great trick you used with your jig saw ! Thanks , never thought of doing it that way , But its better than how I have done it in the past , , starting a radius cut about a 1/2" from the end of my mark .
Nice, but I would probably route that out with a simple home made jig and finish internal corners with a chisel. Thus saving a shed load of money and 100% accurate. I have made my own tracks for standard cordless saws. But as everyone knows track saws are for those that can’t cut a straight edge. They weren’t around when I was learning.
*Gets out handsaw to do the crosscut,makes a cup of tea. Saves $1000
I thought it was a bit overkill also. Nice japanese pullsaw would have done it for $40
I was going to say the most expensive cross cuts I've ever seen that still needed a jigsaw and chisel to clean up.😅
Your assembly table is great, it doesn’t get enough credit!
Thank you very much 😁🙏
You must be a millionaire with all them festools 😍
Not only a nice set up but a professional that knows how to use it.!!!
As a late bloomer..just got into wood working 20 years ago..That tool looks real swell. And that table..wowsers.
Awesome stuff. Fun to watch a skilled Carpenter at work with great tools. 👍
Actually all those tools remove the skill.
@nicholasdaub8765 that's one way of looking at it..I guess hand tools are the real test
@@nicholasdaub8765 Who cares. This makes your life much easier.
It’s amazing how professional you are! Congratulation
I first worked with Festool tracksaws in 2000 in after moving to Berlin, Germany helping a friend remodel an apartment. Very impressed with the quality and ease.
Приятно смотреть на работу мастера!!
If ‘perfect’ was a carpenter 🖤
The extra steps you take set you apart! 👏
I invested in a festool plunge saw just over a year ago. It has absolutely revolutionised the finish to my work. An amazing piece of kit & the best on the market. 👍🏻
Those chisels better be festool too.
I would love to have a shop with all those tools someday.
I like how the camera zooms in (not for the mark) for the Festool logo lol
I love that your first two cuts with the jig saw were used to remove the bulk material so there would no be tear out. I would have foolishly tried to hold the cut off in place and make only two cuts with my jig saw. I learn so much from watching your videos (even the shorts). Thanks!
Thanks 👍 I am happy to hear that.
I liked this too
I'll try and remember this going forward
Такие простые вещи так долго и утомительно!!! При том что этот инструмент стоит космических денег
Great that you show every step in your videos awesome work 👏 thank you
I love your videos, I often discover features of my festool tools I didn't know before.
Yes totally agree with learning a lot from your videos. It’s not just about the equipment. Appreciate the videos.
Glad you like them! 🙏
I've seen them use this cutting guide dozens of times, just like I've seen your videos dozens of times. However, no one has ever shown how. Is it magic!
He’s even got Festool themed shoes laugh😂
You have a great lumber source.
I watch your videos every day and I want to say you are a very good master👍
Your workshop really is like heaven on earth 🤣😉.
That is one nice slab of Douglas Fir.
you getting the new one with the scoring blade I am getting it for sure with the digital table saw I have finally broke down and decided to get that table saw
Work of perfection
You got the tools for sure
Relaxing 😌 😇
Love your content man thanks for the time and efforts 😅🫡👏🏻👏🏻👏🏻
Thanks very much
I love when you chisel the wood by hand ❤
Thanks
I could watch this guy work all day
Such a great work
😁👏
Man do i love that festool. I cant count the number of times that puppy has saved me from additional work. I literally cannot count the times. Cause i don’t have one. Cause I’m broke. And i want one.
Your living my dream
Super cool
Even his shoes are Festool colors! What a brand 😂
Woof. That's quite a bench.
It's pretty big fun watching you enjoy it all! Really very nicely done, Bravo!
One wonders how much time it takes to produce a short... Can't be easy.
Mans got festool shoes 😅
Million dollar shop with million dollar tools u go boy
Man you got a badass setup bro
You have the nicest tools I’ve ever seen.
Thank you very much
I would bet this man has never said the phrase "Eh, close enough" in his entire life
🤣🤣
I've been in woodworking most of my adult life. I'd kill to work in your shop!
Love the track saw
Incredible work...Jesus wow❤❤
Dust collection on that FESTOOL seems amazing.
Magnifique travail comme d'habitude 💪💪💪💪
Hope i can see the table review, love that ❤
Do want that stop on the plunge cuts. Learned that on the first day with my new saw.
All I care about is the simplest action of cutting most of the floating falloff off first. Amazing how simple, obvious, and often never done that action is.
He makes it look so effortless and easy
How much prize
When those blades, bits, saws, knives get full I'd love to show them some love, TNT Sharpening
Men, that Festool its awsome.
👍🙌
Very nice cutting tools
Wow ,sir ,You are a true master
Loudest sound of all the festool gear is the castors on the vac😅
let me come and learn from you for a while! greetings from germany
Festool shoes too lol
🤣🤣 Asolo shoes
The right tools makes life a lot easier and makes for a better experience when working.
Very nice cut. EVERY millimeter counts.
Dream shop
I love your videos! Nice to see all the joints you make, the cuts and tools you use!
Do you have a video explaining how to measure and cut correctly? Especially the marking and then sawing on or next to the line? To be able to saw precisely?
Excellent
Thats a nice saw
WOW wonderfull work
Thank you! Cheers!
Wow sweet
Thats a great trick you used with your jig saw ! Thanks , never thought of doing it that way , But its better than how I have done it in the past , , starting a radius cut about a 1/2" from the end of my mark .
Good job
They invented this drillpress that can do square holes, imagine a circular saw that makes 90degree cuts in every direction
Mate, you are a freak, your work shop is unbelievable....
Very nice
Nice, but I would probably route that out with a simple home made jig and finish internal corners with a chisel. Thus saving a shed load of money and 100% accurate. I have made my own tracks for standard cordless saws. But as everyone knows track saws are for those that can’t cut a straight edge. They weren’t around when I was learning.
Guess everyone is not as perfect as you are
Эх мне бы такой инструмент
Uma obra de arte
I really liked how you did it but I think there was a easier way
Mit Festool kann selbst ich das . Das Zeug ist so genial gut, dass sich der Preis trotzdem locker lohnt.
This guy has the nicest looking lumber i have ever seen
wow, so skillful lol
I love just how silent your saws are.
Why aren't you using festool hand chisels?
They gave me some?
Maybe next year?!
So that's how it's done. Thanks.
Festool sneakers even!?!😉
More Festool tools than Festool itself😂 nice
Excelente
Those tools are wonderful but quite expensive
So?
Always enjoy your videos
I appreciate that
この街の工務店か知らんけど、工房も綺麗やし何よりも道具工具が整いすぎ。
Вот ты молорик 👍👍👍
A German handgrenade as a mallet, nice 🤌
Festool это мечта..
You’re telling me festool doesn’t have chisels?
Cross cut rail is essential, I use it everyday
I wouldnt use a circularsaw for that i would either use the second saw but great work❤
Oh look. More chunky white wood!
И это плотник? Вот мой дедушка был плотником! Все в ручную делал!
Is that a Festool chisel as well????? 😅
Fastools are the beat
بهترین ابزار کار داری خوش بحالت مکان خوبی داری خلاصه عالیه عالی
Das ist Göttlich. Wenn dein werkzeug und Hobby oder Arbeit passt. Dann hast Spaß am Leben.