congratulations my friend great work couldn’t do better myself 🎉is better you buy one of those point solder things to use instead of solder the battery those are so cheap
I think that this issue happened to me where I've likely burned the bms despite not seeing any damage. I wanted to solder a new battery onto the bms, which I did so, then when I put it back in the phone, to activate the battery so that I can program it with jcid, it seems to be bootlooping when I plugged the cable in. I also tested another non original battery and it booted up normally, so I narrowed down the issue to be the bms. It is an 11 pro max that I'm working on and I think you are right about how delicate the 11 series bms is. Any suggestions or ideas would be appreciated. Thanks👍 I have the equipment to carry out the repair swapping the eeprom ic from the old board to the new, however what stencil would be best to use which the pitch matches the bga of the eeprom?
@@MrAn0n This is true, both anode and cathode are nickel plated and depending on the quality of metal used in the product, it can spot weld very well or very poorly. So far with my experience the vendor I bought the batteries from both have poor quality connectors to spot weld to, they have just recently added another supplier which I may try in future. Anyway I was able to get the bms working. The thing is I never actually burned out the board, however I did notice what looked to be a diode that had exploded underneath the underfill coating which was the cause of the bootloop. I bought another used 11 pro max genuine battery, and swiped the diode from that board and placed it on the main bms, and following on from that small repair was it fully working 🤔, able to program and install the battery.
Can you please tell me which IC it would be for the iPhone 11? Accidentally broke the board from one side. Want to just replace the chip with a different apple genuine battery.
Hi. Does the donor flex have to be an original Apple battery, or can it be from a third party equivalent? Also, is it just the one chip on an Xr. Thanks
@@AntoineKiriaky10 @AntoineKiriaky10 Hello, I'm working on the same issue where I received an XR with a damaged flex and has no luck jumping the cut lines. It would be great if you can share which chips are responsible for the batt info. I've been looking for this solution for more than a week and didn't notice you have this on your videos. haha! Btw, the batt health and error message is not much of an issue on the client's end, but I experienced multiple random restarts throughout the day while testing the unit. The panic log specifically tells it's a BMS error, so I really want to fix this. Thank you for sharing your blessings. (iPhone XR). Followed you on IG and will try to message you if you have time. Thanks!
Great job only a mobile repair man know how its hard
congratulations my friend great work couldn’t do better myself 🎉is better you buy one of those point solder things to use instead of solder the battery those are so cheap
thankyou mister
I think that this issue happened to me where I've likely burned the bms despite not seeing any damage. I wanted to solder a new battery onto the bms, which I did so, then when I put it back in the phone, to activate the battery so that I can program it with jcid, it seems to be bootlooping when I plugged the cable in. I also tested another non original battery and it booted up normally, so I narrowed down the issue to be the bms. It is an 11 pro max that I'm working on and I think you are right about how delicate the 11 series bms is. Any suggestions or ideas would be appreciated. Thanks👍
I have the equipment to carry out the repair swapping the eeprom ic from the old board to the new, however what stencil would be best to use which the pitch matches the bga of the eeprom?
@@MrAn0n This is true, both anode and cathode are nickel plated and depending on the quality of metal used in the product, it can spot weld very well or very poorly. So far with my experience the vendor I bought the batteries from both have poor quality connectors to spot weld to, they have just recently added another supplier which I may try in future.
Anyway I was able to get the bms working. The thing is I never actually burned out the board, however I did notice what looked to be a diode that had exploded underneath the underfill coating which was the cause of the bootloop. I bought another used 11 pro max genuine battery, and swiped the diode from that board and placed it on the main bms, and following on from that small repair was it fully working 🤔, able to program and install the battery.
Keep it going my G 🔥🔥
Hei,hei
which ic need to be replaced in iphone 11?
Wow wonderful work 👌
What is the temperature settings and airflow when you reball the ic chip?
Depends on the soldering paste
138c 250-270 air 20
183c 300-320 air 20
@@AntoineKiriaky10 Thank you for replying me back
Nice clean work is this the same as the iphone xs ?
Good job man thanks ❤
Work for iPhone 11??
Já tem tutorial para o 11 pro?🥲
Can you please tell me which IC it would be for the iPhone 11? Accidentally broke the board from one side. Want to just replace the chip with a different apple genuine battery.
DM me
@@AntoineKiriaky10 hi there sir will you pls tell me about 11 pro max battery eprom so i can change with the same processes thank you
Good job!🎉
Hello there, I broke the eprom chip can I do anything to make battery work again with some other method?
Nope, work battery only with non original battery
@@AntoineKiriaky10 thank you this chips was so thin I was only cleaning it
Aluminum cannot be soldered, only welded, otherwise it will fall off or burn
Is the battery of iPhone 12 Pro the same as the battery of iPhone 12?
Yes
Hi. Does the donor flex have to be an original Apple battery, or can it be from a third party equivalent?
Also, is it just the one chip on an Xr.
Thanks
Must be original, but there are a lot of third party batteries that has an original BMS.
The XR has 2 chips, if you want to swap
@@AntoineKiriaky10 Thanks for the quick response.
@@AntoineKiriaky10 Hello again
Do you have a video of doing the same for an XR, there seems to be several chip candidates on the XR BMS board!
Thanks
@@markaffleck4622 DM me
Дякую за контент!
can you show where is the bms on iphone xr battery board?
DM me
@@AntoineKiriaky10 YOU request for DM. please share your knowledge here. so we can learn more. thanks
new sub. nice video. thanks once again
@@meharimran86 I can’t share a photo in the comments, that’s why I ask everyone who wants those information they can contact me.
@@AntoineKiriaky10 @AntoineKiriaky10 Hello, I'm working on the same issue where I received an XR with a damaged flex and has no luck jumping the cut lines. It would be great if you can share which chips are responsible for the batt info. I've been looking for this solution for more than a week and didn't notice you have this on your videos. haha! Btw, the batt health and error message is not much of an issue on the client's end, but I experienced multiple random restarts throughout the day while testing the unit. The panic log specifically tells it's a BMS error, so I really want to fix this. Thank you for sharing your blessings. (iPhone XR). Followed you on IG and will try to message you if you have time. Thanks!
i have 11 pro, when i replace cell, bms board short😢 help mister
DM me
@@AntoineKiriaky10 i was DM you
i was follow you @roi_my
@@AntoineKiriaky10 mister I’ve DM you 🙏🏼
Its possible in iphone 13?
Yup
👍