I apologize for neglecting my farming channel, I feel more obligated to produce beekeeping video since I have followers supporting the content. But I do plan to get back on farm videos very soon, I'm actually in the middle of editing a farm video now. Thanks for being a fan!
The tool that Kamon uses is my go to tool. It's taper is longer on the end used to pry the hive boxes apart and should be easier on the boxes. Your favorite tool does have a lot of extra features that is awesome. I may have to buy one this winter.
Seems there is a lot of people supporting the tool Kamon uses and that is great but I haven't seen enough of his videos to know which tool that is. lol Is it the red handled J hook tool? (Kamon makes great videos from what I have seen, I just don't have much free time to watch videos.) You should try the wooden handled tool, I think you would enjoy it.
you know you are pushing that hive tool and i don't blame ya. I am pretty much done for the year just seeing if i can get them a little more 2:1 syrup but i'll try that hive tool. like you i end up with 2 or 3 tools in the yard. Problem with a tool that doese everything is i'll only need one and when i lose it i'll be out of luck lol.
You missed showing one of the best hive tools. It was designed by Kent Williams and is available from most suppliers as original or Amazon knockoff. I got mine from Kelley. I find it helpful when removing frames as it is easy to put the hook under the frame and lift it out. I see several UA-cam beekeepers, like Kamon Reynolds, using this tool now. I like your future rating system too.
Are you talking about the E-Z Pry? I think that's what it's called, and it is my favorite. I got mine at Mann Lake, and when it was on sale I got a few more. Not in Jason's review.
I never understood why they paint the tools. Eventually that paint gets all over the hives. I had to get a wire brush for my drill and strip it all off, gentle heating with a torch helps too.
Interesting point about the paint and your right it can rub off on equipment very easily. I'd guess the paint is to make the tool stand out if lost. I look forward to seeing your setup!
I have the stainless j hook on the far left. I find it difficult to separate heavily propolized deeps with it and it is too thin to pry without bending. Once in the box it's great but there is no place on the back end to beat on without impaling your hand.
I requested the wooden handled hive tool for Christmas. I also really like the Kent Williams. I noticed when it's really hot outside,and I lay the metal tool on another hive, they get REALLY hot. The wooden handled one does not. Another big plus in my book.
I’m working as a bee keepers assistant and I do a lot of scraping, I personally find the J hook not as good for that, but actually removing frames and prying stuff open it’s much easier.
Thanks Jason for another informative video. Your two favorite tools are my favorites also. I really like the first one for prying and lifting boxes off the ones below. The thin blade slides between the boxes easier and does less damage to them. The wooden handle tool is definitely my favorite for lifting out frames when doing hive inspections. The notches on the j hook really hold onto the frames and the wooden handle makes it easier for me to hold on to. I took the hammer part off to make it lighter. The frame groove and excluder scrapers come in really handy at times.
Love your videos. Just wanted to point out two excellent tools you forgot to mention. The "Giant hive tool", Its 14" long. Giving you awesome leverage. It has a double J hooks. Each a little off from each other. It lets you use the one hook the way you use your fulcrum on your " everything tool". Made very well. SS. It could side line as a self defense weapon, it feels so big in compareson. The other is the "Turbo Tool". Only ever seen that sold at Dadent. its SS too. Very unique. Works very different than normal tool. Took me a bit to figure it out, but is now my favorite tool. ( got the Italian tool also, but its a turd in my opinion). Thanks for all the videos. I find your videos more informative; you being a northerner like myself. More relevant to the area. Im SE MI
I have not, I just have people supporting my videos on the bee channel so I feel more obligated to produce bee videos. Don't worry cattle videos coming soon.
And if it's a total flop, maybe they get the "Waxmoth of Death" award? LOL, just kidding of course, maybe that would scare people away from sharing their setups!
Good Morning Jason....I think I’ll try your favorite hive tool....I’ve always relegated myself to the simple tool....but I do see the advantages of the fulcrum tools....Thanks....
Morning Ed, You will not regret the purchase of the multi-purpose hive tool. I know I love that damn thing and it makes the beekeeper look bad ass when they carry it around the bee yard, the bees know your serious. 😉
Morning, Jason! I'm just an "Internet beekeeper" but I do love watching the little critters, and the people that love them. That tool with the long J-hook would be extra good for those frames that are completely burr-combed together, seen that a couple of times. Beek has a hard time getting the frame out because they're completely stuck together and both are propolised to the box. I think your idea for winter content is cool--once the bees are put to bed for the winter there's not much else going on, so this could work out. Anyway, was sipping my coffee, spotted your notification and clicked right on it. Give Ladybug a big hug from all of us!
I ran right out after seeing so many of your videos and got 1 just like yours ( lol its freakin awesome ) lol push it Jason. lol I will have to be in next year bee setups as I wont see my fist girls until spring, but it sounds awesome, and hey ladybug :)
Glad to hear I encouraged you to buy one. I hardly ever use any of my other hive tools unless I can't find the one I love. lol Look forward to seeing your bees one you get them. Ladybug say's "Hey Rob"!
Thanks for this video, Jason. Well done. My favorite hive tool is the "hitchhiker" type. It has the frame extractor and the the angle of the chisel end is in the right direction for scraping or frame separation. They are sold everywhere. I got mine from Better Bee: www.betterbee.com/beekeeping-tools/ht8.asp Dr. Joe www.summit-apiary.com
Sounds like you have a plan for winter content & I'm sorry to say Jason I love it when you say - Poosh = push lol - Pretty sure I mentioned it in the past !
No worries, I know all to well that I say poosh vs push. It's just my country boy slang coming out. lol Hope your entering into winter content series, who know I might be able to use my slang in it too. lol
Miss your grazing acres videos.......I hope to see them soon.
I apologize for neglecting my farming channel, I feel more obligated to produce beekeeping video since I have followers supporting the content. But I do plan to get back on farm videos very soon, I'm actually in the middle of editing a farm video now. Thanks for being a fan!
Need to paint bright orange for easy find in the apairy. Great job Jason.
The tool that Kamon uses is my go to tool. It's taper is longer on the end used to pry the hive boxes apart and should be easier on the boxes. Your favorite tool does have a lot of extra features that is awesome. I may have to buy one this winter.
Seems there is a lot of people supporting the tool Kamon uses and that is great but I haven't seen enough of his videos to know which tool that is. lol Is it the red handled J hook tool? (Kamon makes great videos from what I have seen, I just don't have much free time to watch videos.)
You should try the wooden handled tool, I think you would enjoy it.
@@JCsBees no it isn't the J hook. It is a blend of your wood handle and the J hook I suppose. I'll try to send you a link.
@@JCsBees Link to amazon
www.amazon.com/dp/B011QIYLHW/?ref=exp_tennessees-bees_dp_vv_d
you know you are pushing that hive tool and i don't blame ya. I am pretty much done for the year just seeing if i can get them a little more 2:1 syrup but i'll try that hive tool. like you i end up with 2 or 3 tools in the yard. Problem with a tool that doese everything is i'll only need one and when i lose it i'll be out of luck lol.
You missed showing one of the best hive tools. It was designed by Kent Williams and is available from most suppliers as original or Amazon knockoff. I got mine from Kelley. I find it helpful when removing frames as it is easy to put the hook under the frame and lift it out. I see several UA-cam beekeepers, like Kamon Reynolds, using this tool now. I like your future rating system too.
Are you talking about the E-Z Pry? I think that's what it's called, and it is my favorite. I got mine at Mann Lake, and when it was on sale I got a few more. Not in Jason's review.
It is the Kent Williams Hive tool. On page 42 in the current Kelley Bee Catalog. HD -051, $17.95. Www.Kelleybees.com.
Yes i can't believe he didn't have the Kent hive tool. I've used then all and it's definitely my favorite.
I never understood why they paint the tools. Eventually that paint gets all over the hives. I had to get a wire brush for my drill and strip it all off, gentle heating with a torch helps too.
The basic red/pink j hook is what I use atm.
The one down side to the wooden one is its hard to clean and sanitize. Otherwise it does look very interesting.
I love the winter setup idea. I will be sending my pictures in a month or so when I get the insulation on.
Interesting point about the paint and your right it can rub off on equipment very easily. I'd guess the paint is to make the tool stand out if lost. I look forward to seeing your setup!
Like your wooden handled hive tool the best
I have the stainless j hook on the far left. I find it difficult to separate heavily propolized deeps with it and it is too thin to pry without bending. Once in the box it's great but there is no place on the back end to beat on without impaling your hand.
Thanks for sharing your experience with your hive tool. Have you considered upgrading to a different tool?
@@JCsBees definitely. I like the looks of the wood handled one. It has the scraper, j hook, and a flat part to bump. Excluder scraper is just a bonus.
I requested the wooden handled hive tool for Christmas. I also really like the Kent Williams. I noticed when it's really hot outside,and I lay the metal tool on another hive, they get REALLY hot. The wooden handled one does not. Another big plus in my book.
@Jean Irwin I never gave the heat any thought, good point. I love the wood handled tool.
The one that is hardest to lose is the best one!
I’m working as a bee keepers assistant and I do a lot of scraping, I personally find the J hook not as good for that, but actually removing frames and prying stuff open it’s much easier.
Try the wood handled hive tool, my favorite one. You will love it!
The best way to pull your frames apart is the J Hook
my tool is like your oldest one with a frame lifter,kaymons reynolds fav
Thanks for taking the time to share the variety of tools out there! At 05:30 the opener is for cans of sugar water while installing packages.
Thanks Jason for another informative video. Your two favorite tools are my favorites also. I really like the first one for prying and lifting boxes off the ones below. The thin blade slides between the boxes easier and does less damage to them. The wooden handle tool is definitely my favorite for lifting out frames when doing hive inspections. The notches on the j hook really hold onto the frames and the wooden handle makes it easier for me to hold on to. I took the hammer part off to make it lighter. The frame groove and excluder scrapers come in really handy at times.
Love your videos. Just wanted to point out two excellent tools you forgot to mention. The "Giant hive tool", Its 14" long. Giving you awesome leverage. It has a double J hooks. Each a little off from each other. It lets you use the one hook the way you use your fulcrum on your " everything tool". Made very well. SS. It could side line as a self defense weapon, it feels so big in compareson. The other is the "Turbo Tool". Only ever seen that sold at Dadent. its SS too. Very unique. Works very different than normal tool. Took me a bit to figure it out, but is now my favorite tool. ( got the Italian tool also, but its a turd in my opinion). Thanks for all the videos. I find your videos more informative; you being a northerner like myself. More relevant to the area. Im SE MI
Jason have you changed your focus away from cattle to bees? We sure miss your cattle videos ..
I have not, I just have people supporting my videos on the bee channel so I feel more obligated to produce bee videos. Don't worry cattle videos coming soon.
Jason Chrisman
Thank you Jason...
LADY BUG IS SO CUTE!!!
She's a sweetheart too!! :)
Im still using the standard red handle. Works well for me but may modify the frame j hook a little with a grinder.
I've seen that modification before and it seem to work. Best of luck!
I like the Kent Williams Hive Tool
Thank you Jason for another excellent video with good sound advice. Look forward to your new video sounds a good idea.
No problem, glad you enjoyed it! Have a great day.
Really useful, thank you
Great video, I say if you see anything in someone winter setup you don’t like, you should award them one or two hive beetles
And if it's a total flop, maybe they get the "Waxmoth of Death" award? LOL, just kidding of course, maybe that would scare people away from sharing their setups!
JC, another vote for the Kent Williams hive tool. Donated all my priors 'cause I like it so much !
You in the woods
Good Morning Jason....I think I’ll try your favorite hive tool....I’ve always relegated myself to the simple tool....but I do see the advantages of the fulcrum tools....Thanks....
Morning Ed, You will not regret the purchase of the multi-purpose hive tool. I know I love that damn thing and it makes the beekeeper look bad ass when they carry it around the bee yard, the bees know your serious. 😉
@@JCsBees 😆
Yes, based on your extensive review, I've also just ordered one. Looks very handy.
Morning, Jason! I'm just an "Internet beekeeper" but I do love watching the little critters, and the people that love them. That tool with the long J-hook would be extra good for those frames that are completely burr-combed together, seen that a couple of times. Beek has a hard time getting the frame out because they're completely stuck together and both are propolised to the box. I think your idea for winter content is cool--once the bees are put to bed for the winter there's not much else going on, so this could work out. Anyway, was sipping my coffee, spotted your notification and clicked right on it. Give Ladybug a big hug from all of us!
I love it. I plan on sending you an email pic of my hives.
I ran right out after seeing so many of your videos and got 1 just like yours ( lol its freakin awesome ) lol push it Jason. lol I will have to be in next year bee setups as I wont see my fist girls until spring, but it sounds awesome, and hey ladybug :)
Glad to hear I encouraged you to buy one. I hardly ever use any of my other hive tools unless I can't find the one I love. lol Look forward to seeing your bees one you get them. Ladybug say's "Hey Rob"!
Thanks for this video, Jason. Well done. My favorite hive tool is the "hitchhiker" type. It has the frame extractor and the the angle of the chisel end is in the right direction for scraping or frame separation. They are sold everywhere. I got mine from Better Bee: www.betterbee.com/beekeeping-tools/ht8.asp Dr. Joe www.summit-apiary.com
Sounds like you have a plan for winter content & I'm sorry to say Jason I love it when you say - Poosh = push lol - Pretty sure I mentioned it in the past !
No worries, I know all to well that I say poosh vs push. It's just my country boy slang coming out. lol Hope your entering into winter content series, who know I might be able to use my slang in it too. lol
Hi dear friend how are you today three queen I have dead and the 4th one almost dead do you know why is that happened
Thanks
Also, tossing a magnet in pocket helps with not losing your tools.
I actually wear a belt hive tool holster with a magnet but I love your suggestion!