Depends on the amplifier. Some have connectors that have pigtail wires that connect to the speakers. Some have terminals screws that require separate wires to connect from the amplifier to the speakers. Remember, brighter colors indicate positive(+), and darker colors represent negative(com or -)
If I where to choose which speaker strobe to get it would be the l series because 1 I like how it looks,2 it’s new brand new, and 3 the audio quality is good
@@fireguyif74 sync module was optional to begin with, and definitely not necessary when only using one strobe or using older strobes that are incapable of sync.
I bought a Wheelock E70 speaker strobe. The strobe works great, however there is no sound. I hooked up power to both sides. Should the chime work as is or does it require additional accessories? Thank you.
E70 or CH70? The E70 is the speaker strobe variant that requires an audio source like an amplifier or voice evacuation panel to sound; the CH70 is the chime strobe variant that only requires 24VDC
You can find decent as well as cheap amplifiers on eBay and Amazon. You also can wire an aux cord straight to the speaker, but since these speakers take a lot of volts/watts, you're going to need an amplifier to drive them in order to get some decent volume out of them.
@@BlackLightning4547 but can i connect of any sensor ceiling or i need connect of the panel of control? . do you have any video you show me how set up please?
Nicely done!
Thank you!
Thanks bro im finaly getting into the hoby for real and this helpes me so much! Ihope you keep going, Good job bro!
Pleasure to help!
@@BlackLightning4547 keep the work up
@@Tank_66 Will do!
Thank you now I won't spend all my money for a voice panel now my spsrk works!
My pleasure
I have a Siemens SEF-W Fire Alarm Speaker but I’m having a little trouble with it
What's the issue?
@@BlackLightning4547 Like what wires do you use to connect it to where it sounds?
Depends on the amplifier. Some have connectors that have pigtail wires that connect to the speakers. Some have terminals screws that require separate wires to connect from the amplifier to the speakers. Remember, brighter colors indicate positive(+), and darker colors represent negative(com or -)
Can you turn it into a Bluetooth speaker ?
It's plausible, I seen it done with a Simplex LifeAlarm
@@BlackLightning4547 i know that’s what I would use my speaker strobe for since I’m a beat maker that also likes fire alarms 🚨
Understandable
I have those alarms in my school but it’s a horn
Ah, the PC2WLs and PC2Ws
Does strobes do stablized on or just flashing
Strobes flash... lights stay on steadily till power is removed.
Nice video man!! This is pretty cool!
Thank you
If I where to choose which speaker strobe to get it would be the l series because 1 I like how it looks,2 it’s new brand new, and 3 the audio quality is good
Good choice
@@BlackLightning4547 Should I get that one too? Or not?
@@AndrewIsAwesome882 The System Sensor SPSCWL L-series speaker strobe is a good choice. It's easy to mount, easy to wire, and has great audio quality.
what about if we only want one speaker strobe
Then disregard the part where I go over wiring the second speaker strobe...
@@BlackLightning4547 yeah but does that mean we still need that sync module
@@fireguyif74 sync module was optional to begin with, and definitely not necessary when only using one strobe or using older strobes that are incapable of sync.
So do I!
👍🏼
@@BlackLightning4547 Where did you get that System Sensor SPSCW?
@@AndrewIsAwesome882 I got it from Suppression Systems INC as well as other alarms and panels
Do you have to solder anything?
No
Thank you I really needed this
My pleasure
I really need it, too. By the way, where did you get that System Sensor SPSCW?
@@AndrewIsAwesome882 I got that from Suppression Systems INC I believe for free.
What is the website on the computer for the voice evacuation message
SoundTrap.com is how I make custom voice evac tones & messages. Audacity(the digital audio editor) is good too.
What amplifier were you using
I took it out of a gaming chair
Where can you get an amplifier like that?
That one I dug out of a gaming chair, you can find cheap ones on eBay or Amazon
I bought a Wheelock E70 speaker strobe. The strobe works great, however there is no sound. I hooked up power to both sides. Should the chime work as is or does it require additional accessories? Thank you.
E70 or CH70? The E70 is the speaker strobe variant that requires an audio source like an amplifier or voice evacuation panel to sound; the CH70 is the chime strobe variant that only requires 24VDC
I dont have an amplifier
You can find decent as well as cheap amplifiers on eBay and Amazon. You also can wire an aux cord straight to the speaker, but since these speakers take a lot of volts/watts, you're going to need an amplifier to drive them in order to get some decent volume out of them.
@@BlackLightning4547 how about audio cord
@@BlackLightning4547 where do i get an aux cord
@@NewEnglandAviaton987 your local Walmart or Fred Meyers in the electronics section
Will this work for a 2902-9739
As long as you have an amplifier with the proper wattage output, you should be fine
Ok thanks for the help
@@safetran50 my pleasure
Wire color codes
Postive Colored
White
Red
Yellow
Negative Colored
Black
Blue
Correct
I have a L series remote strobe and it can do all the way up to 185 candela
And it is freaking bright
Nice, and I bet it's bright
SOOO BRIGHT!!!!! I wish I had a strobe only that could do 225 candela
Trust me, 185 Candela is plenty
hi bro, can i add 2 more strobe sensor ceiling at the same setup?
As long as you have the proper amps + watts to back up your setup, add as many as you want.
@@BlackLightning4547 but can i connect of any sensor ceiling or i need connect of the panel of control? .
do you have any video you show me how set up please?
@@geheri yes, you can wire two-wire smokes without a panel
ua-cam.com/video/7Tc4O26J4ds/v-deo.html
Good thing I already have a Speaker strobe and knowledge of them lol
Don't we all?😉
nice well i will link the 6 languages in one though.
well seperately due to the comment error corruption deletion on youtube.
Thank you, yeah UA-cam doesn't like links in the comments section, your comments are not even in my "held for review".
Weird speaker
They're pretty normal speaker strobes
N_i_c_e_v_i_d_e_o
Thank you
Voice
Aye I see you bro!
Yerrr me
Awesome! But next time don’t swear in your videos pls
Thank you, and it was a long video that I wasn't able to edit hence being uncensored
S... PS.... UH... CW 😂
Relax
@@BlackLightning4547 🤣🤣🤣🤣🤣