Dear John, thanks für dieses Video. The background-image in the lower third is a pretty cool option. Do you have additional infos for this feature, because it obviously need some css for the correct position and scaling. Thanks in advance. Best wishes from Austria.
Just beginning to use these now. First thing that jumps to mind is being able to position the text in a lower third where I want in the graphic. It’s too vente red for my choice right now, but there isn’t a way of adjusting those parameters independently.
I use H2R by displaying the output on a screen then using the Atem to key out the green to overlay the graphics. But the information bar is at the top I want to be able to not see this without masking.
Hey hello. I have a question when will you fix the display of "Count up"? 00:00 - 45:00 min worked very well in the start version. and from 45:00 to 90:00 min. I used the program to broadcast football matches
Hey John, Thanks for this superb update. How do you get the buttons page on your iPad!?!? Does it and your laptop need to be connected via cable to a network switch or can they be on the same wireless network?
So long as the main computer running H2R Graphics, and the iPad are on the same network (wired or wifi) you can open the output or buttons right on that iPad!
Nice new features, thanks John, Im wainting for the companion implemetation. One question from the hardver side: I plan to buy a device for balance the loads of my devices when playing out graphics (MBP+Atem Extreme). Whats your opinion John, is it enough to buy a BMD UltraStudio Monitor 3G or an UltraStudio HD Mini is entry level? (4K is the dream :-) ) Key and fill nost musthave maybe later.
Is it possible to increase the chat buffer in the social tab? During our livestreams, we save some questions and super chat for the end. Some of the ones saved from the early part of the show will no longer be available to display, I assume, due to a buffer restriction.
@@heretorecord Thank you for the response. I have it set at 60 seconds but a chat that is saved to display later during the stream will go away after a period of time. Does the software only keep so many chats in a buffer?
I would suggest adding a delay to the display of individual graphics, for example, we run a slide-in graphic and only after it appears on the screen, the fade text will appear. For this, the delay attribute expressed in ms is enough.
Can someone tell me or point me in the right direction of how to use the stream deck with H2R v2 to display graphics (Lower Thirds) during a livestream using streamlabs desktop? (nevermind - I figured it out after getting the latest version of Companion v 2.2.0)
Background transparency support is great. I was wondering if you plan on adding a way to do linear keying - I guess it could work with two windows, or something via an SDI hardware device?
I’ve just added Key/Fill windows both into the app, but for best results it works nicely to bounce the output though OBS (or similar) and use a Decklink or UltraStudio.
I have a problem.. News headlines bar at the bottom does not scroll to the right.. for Arabic language.. but scroll left only for English language.. What is the solution? Thank you
A great piece of software John. Really enjoying it. I've set up a Pi 4 to handle the output and I'm running the main app in a VM. What would be cool is to a) be able to configure all options from the web UI and b) run the whole as a Docker container.
I have been looking into the Pi4 for sure and many are using it just fine with that which is great! Any options you are missing in the web UI specifically?
@@heretorecord Setting up the stream details in the “Data sources” section of the Settings area of the main UI. The other settings would be good too of course 😀
V2 is awesome! Thank you for working on this!
Very happy to hear it!
could you go into a little more detail on how you get the buttons window onto your iPad?
Dear John, thanks für dieses Video. The background-image in the lower third is a pretty cool option. Do you have additional infos for this feature, because it obviously need some css for the correct position and scaling. Thanks in advance. Best wishes from Austria.
This is just amazing!
Thanks for show these quick tips
Thanks for watching!
Just beginning to use these now. First thing that jumps to mind is being able to position the text in a lower third where I want in the graphic. It’s too vente red for my choice right now, but there isn’t a way of adjusting those parameters independently.
It could very cool to add the possibility to play video, snd then in one place there could have all the graphic and playback in the good order…
It's a consideration for sure, still thinking about it though!
Awesome V2..couplequestions please.. How do I get lower thirds to go on then off automatically in a few seconds like V1 did?
I use H2R by displaying the output on a screen then using the Atem to key out the green to overlay the graphics. But the information bar is at the top I want to be able to not see this without masking.
Duration trigger has been added to the recent version! And CTRL+F will go full screen!
@@heretorecord saw the duration trigger in the upgrade.. Its Great. Ctrl F.. I feel so dumb 😂
Hey hello. I have a question when will you fix the display of "Count up"? 00:00 - 45:00 min worked very well in the start version. and from 45:00 to 90:00 min. I used the program to broadcast football matches
Really nice work!
Jeepers dude?! How did I not know about this?! Very cool.
Glad you found it!
Hey John,
Thanks for this superb update.
How do you get the buttons page on your iPad!?!?
Does it and your laptop need to be connected via cable to a network switch or can they be on the same wireless network?
So long as the main computer running H2R Graphics, and the iPad are on the same network (wired or wifi) you can open the output or buttons right on that iPad!
Nice new features, thanks John, Im wainting for the companion implemetation. One question from the hardver side: I plan to buy a device for balance the loads of my devices when playing out graphics (MBP+Atem Extreme). Whats your opinion John, is it enough to buy a BMD UltraStudio Monitor 3G or an UltraStudio HD Mini is entry level? (4K is the dream :-) ) Key and fill nost musthave maybe later.
If you want 4K and Key/fill then perhaps the UltraStudio 4K instead. It's a little more pricey but could be a good long-term solution
Is it possible to increase the chat buffer in the social tab? During our livestreams, we save some questions and super chat for the end. Some of the ones saved from the early part of the show will no longer be available to display, I assume, due to a buffer restriction.
There is a setting within the app launcher to set how often to check for new comments, hoping that is what you mean?
@@heretorecord Thank you for the response. I have it set at 60 seconds but a chat that is saved to display later during the stream will go away after a period of time. Does the software only keep so many chats in a buffer?
Hi thanks for video, is it possible to set transparent background on ticker?
I barely scratched the service on v2. Can’t wait too
Get to it!
I would suggest adding a delay to the display of individual graphics, for example, we run a slide-in graphic and only after it appears on the screen, the fade text will appear. For this, the delay attribute expressed in ms is enough.
That would be excellent to have. For now, the Companion module would work nicely too.
@@heretorecord I use Elgato stream deck and set the lags there. Maybe in the future the next version will succeed ...
How about control of H2R V2 from companion/stream deck. Did I miss that?
The official module is in the latest Beta build of Companion - still a work in progress!
Hello great job i tried to make it work with my ipad h2r live and its says administrator only
Can someone tell me or point me in the right direction of how to use the stream deck with H2R v2 to display graphics (Lower Thirds) during a livestream using streamlabs desktop? (nevermind - I figured it out after getting the latest version of Companion v 2.2.0)
Hi there! Is there a way to add a third line to a lower third?
Background transparency support is great. I was wondering if you plan on adding a way to do linear keying - I guess it could work with two windows, or something via an SDI hardware device?
I’ve just added Key/Fill windows both into the app, but for best results it works nicely to bounce the output though OBS (or similar) and use a Decklink or UltraStudio.
@@heretorecord oh awesome! Sorry, I should have checked before posting..
No problem at all!
@@heretorecord would a MacBook M1 with two HDMI outputs (one native, other through usb to HDMI converter) be used for key and fill?
Can you add your own animated Fusion lower third graphics?
I have a problem.. News headlines bar at the bottom does not scroll to the right.. for Arabic language.. but scroll left only for English language.. What is the solution? Thank you
can I get H2R graphics into my Atem using my Ultrastudio instead of the H2R generated green screen
How I can use H2R graphics on FACEBOOK livestream?
I really miss the local Spreadsheet functions. Importing names, company. etc directly by a excel as u do with the list now
I do too! On the list for sure!
Adding support to Videos will be a killer feature worth the PRO price alone! Are you still considering adding it?
Hi! How to translate chat events into other languages? By default they are displayed in English.
Is this meant to replace overlays done in vMix?
It's certainly an alternative to that
hi how do it get rundown working on my ipad?
Just enter the full we address you see in the launcher. Make sure your network settings on the left are set to your LAN
@@heretorecord thanks for that. Still having trouble with that. when I open the control on the ipad the control comes up on my computer instead
Ahh yes. Get on the latest version as I have solved that!
A great piece of software John. Really enjoying it. I've set up a Pi 4 to handle the output and I'm running the main app in a VM. What would be cool is to a) be able to configure all options from the web UI and b) run the whole as a Docker container.
I have been looking into the Pi4 for sure and many are using it just fine with that which is great! Any options you are missing in the web UI specifically?
@@heretorecord Setting up the stream details in the “Data sources” section of the Settings area of the main UI. The other settings would be good too of course 😀
I am really missing the Linux download ;)
Same, I have it on my list still though so thanks for the reminder!