I hope that I am not overstating this, but your videos here will last for generations, they are timeless and amazing for learning. Thank you so much for what you do.
CHUCK YOU ARE THE BEST, I HAVE LEARNED MORE FROM YOU THAN ANYONE ABOUT LEATHER WORK, I AM 80 YO AND JUST STARTED DOING LEATHER WORK. THANK YOU VERY MUCH
I am so new to leather work that ANY and ALL information I can get is GOOD information. It’s all good to have access to it. I love it and am learning from many.
Full disclosure. I was getting frustrated with my snaps bending and not setting despite not sacking the crap out of it. I put this video on and it set just fine. You’re a calming presence when I work it seems
Yes, cant agree with you more. Now I can order more and do it his way .He is a great teacher. I've tried to do it under outher so called internet In- lighters. Screwed up too many of them and now I have to order more.😎.its cool
If any post is too long, just file or grind it shorter. A little practice on scrap leather and snap posts never again bend over. I really like The Leather Element. You all do a much needed service Thanks, Chuck
tyvm i was fearing the snap. i ordered some very cheap ones and they just crumbled. my boyfriend tried who was a pro and he got very frustrated. ty i wrote it all down and now know how to buy. you are the greatest
THAnKS so much for this video! I have spent about 2 hours trying to figure out how to put a snap in a small keychain! I was on the verge of just giving up! After watching your video there might just be some hope for me and snaps! I made the mistake of purchasing EXPENSIVE snaps at a hobby store - that is probably what has caused me so much frustration. THANKS again!
Thanks for another instructive video Chuck. I agree with some others, close ups would greatly enhance your videos. I was not familiar with the last snap and could not see it clearly.
Thank you the snaps have been a right pain in the butt for me. Because I'm a novice and using leather offcuts for now, but A few things that I've made have sold very well. thanks to watching you make it all work out well.
Love all your videos! They’re great! I would say some close up shots of what you are working on would be awesome. Also, slow down a bit lol It’s not a race lol Yes that will make the video longer but it would help us the viewer understand better. If you think the video is too long make it a two part or series of 3 or more. I for one would watch a series by you and I’m certain most others would as well. You could also make two separate videos through the editing process. One that’s less than 10 minutes and the other that is either 20 minutes long or is a 2 part video Thank you for making The Leather Element videos, because of those videos I’ve actually been able to learn leather craft and now make exquisite pieces. Cheers mate
I finally found some line 24 snaps with a decent length post! (On ebay, not the leather supply shops I generally use) now all of a sudden they are easy to use, no more having to shave the back of the leather to ensure enough bite occurs when setting them!
That fixes my old El Paso costume leather shoulder holster for a 4 inch Colt Python. The snaps came off the speedloader pouches. That holster is about 35 years old and still in great condition, as opposed to that mass produced junk made my Galco. I am making Steve McQueen Bullitt style upside down holsters now. Safari and everyone else quit making those holsters back in 1980. I love that holster design! It is reliable, trustworthy, safe, and super comfortable. Lesson learned about crappy eBay snaps. No more no name Asian made garbage snaps!
Thank you very much for actually teaching me how to do these snaps I've waited a long time to do this right, I've got the kit with all the stuff .I couldn't do it with other people training . thank you.!!! anyway thank you very much it really helped out somebody that is in the MR category . W/ out sounding cornny ,you are a very ,oh no, you are a great Teacher.you have been bleesed by the blood of the Lamb.
Thanks for the guidance. I'll be sure to keep a copy at hand and work to avoid ruboff. Sweat from hard work causes the most problem, so I may change to nylon belt for those times, mowing, digging etc. Much appreciate your suggestions and look forward to more videos. Great info. Cheers.
I've learned on line 20/24, if you post is crushing (I have a Barry king setter and arbor press for both) take a countersink drill bit and run it in reverse to start the bell. Works great everytime. Now segma snaps one side always crushes and I've yet to get the hang of them.
I love watching these videos except for one thing, close up shots. Close ups (in my opinion) would be more informative to people. Also how do you measure for a shoulder rig if you know?
I have found that if you are having trouble setting the line 20-24 use a Philips screw drive first. Place the screw driver on the post and give it a light tap. this will flair out the post and finish with the setter, this will set the post with a rolled star holding the snap.
OH hey, I just thought of something that would really help me. I work on my dining room table and would love some organizing and essential tools tips. I'm forever getting something unwanted on my work. maybe tips on fixing uh-ohs.
Oh snap! You can also use the flat side of the anvil on the male side of the line 20/24 snaps if you don’t have the granite slab. The same goes for the sigma snap anvil too.
More questions: Can I use a line 24 snap on thin leather if I shorten the posts? Grind them down. I like the very wide cap for design reasons. No one makes a short post line 24 snap (that I have found). If it is ok, how much of the post has to extend through the male and female pieces? Like double capped rivets? I will try it on some scrap leather to see if it works.
Good information and good video explanations. I have several leather knife sheaths that have snaps that say, the great state of Oklahoma on them. Do you happen to know where I can find those to purchase? They are 9/16 line 24. Thank you for the great video.
I have a leather wallet that was given to me in 1978. Very durable. I've purchased several other wallets over the years but I always come back to this one. After 40+ years one of the caps came loose from the base. I bought a pack of snaps at a discount store and can't get them to stay installed. No idea what size they are. Doesn't say anything on the package re size. If I bought 24's and the originals are 20's, are they interchangeable?
Thanks. Very useful information. I've seen people just flatten snaps with a hammer and get frustrated when they ruined their project. Just have to get the right tools. I'm frustrated and hesitant making belts and straps for friends, only to find out their clothing is ruined from dye running on to them. I' ve no clue as to what I should coat my leather to prevent it from running. Could you please refer me to a past video or just tell me what to use? I'm only using black or brown oil dye. Cheers.
This is a tough one that we all deal with. You’ve got the right dye going so I can only suggest two or three things that will help. I keep a lightly oiled cotton rag (Neatsfoot) in my shop (in a baggy so it doesn’t evaporate) and, once my project is dyed and dry, I’ll rub down the entire project, front sides and back. The light oil in the rag is enough to get a bit of oil in the leather, but, not enough to where it spots. Also, rubbing down with the oil cloth is more cleaning than oiling so pay a little extra attention to the edges and flesh side (back). Once dry there (almost immediate) use a good top coat on the top grain, edges and back, and, while rubbing or buffing this in, you’re cleaning a bit more. This will knock out about 99% of the rub-off. Unfortunately, we all sweat, it rains, there’s humid days and whatever goes in the leather will come out and dark brown, or black, is the worst, but, run a rag down the edges and across the back after the above is done and I think you’ll be surprised. I hope this helps!
Why isnt there copper snaps to go with copper rivets you may be using say on a knife sheath. Im thinking maybe because its too soft? Has to be plated? I really dont know. Ive only found antiqued copper which is prolly not copper at all. Id like to match all the furniture.
Hi Tracy! Check out the video below and see if that helps. If not let us know and we'll see what we can do for you! ua-cam.com/video/sHD3bJMJ9Q4/v-deo.html
I've watched your video on removing snaps but am having difficultly with ones that are domed on both sides. The tip of the awl keeps sliding off because of the slope. Any tips please. I need to fix a bracelet I made using your instructions for the square link cuff.
I've always been taught to turn the post around in a circle and do many, many soft blows. Whenever I try to do the two or three hard blows, the snap post always curls crooked, ruining the snaps. I've actually done a dozen project without snaps to avoid using them. I wish I had the money for a snap setter (the pull down, perfect snap every time kind).
Love your informative videos -thank you for them. I am trying to put a snap on a piece of heavy leather (an axe sheath that gets a rough workout in the back of a pickup) The strap is slightly lighter leather and is no problem. But when I've punched my hole in the heavy leather, the post barely protrudes through and into the snap - not nearly enough to set it. The post measures about 3/8"in. and is the standard Line 20 post. I've tried to buy longer posts - maybe a 1/2" from both Weaver and your competition, but no luck - no-one seems to sell longer posts. How would you solve my problem? Thanks.
I would replace the brass with nickel, you’re likely having an issue with residual chrome salts from the tanning process. The nickel may corrode too, but that’s where I would start.
I want a good HAND press for setting snaps. The hammer and anvil works, but I can’t get them set evenly. The presses are so expensive. So I’m looking for a hand press that works well. Suggestions?
Question. Please help. I have a jacket with snaps on the end of the sleeve. I need another male end about another half inch in so the sleeve will actually close enough to not fall down over my hand. How do i know what size male end i need?
I have a lot of tools for setting but they are all Tandy. Could you please send the information on what numbers your tool are equal to in the Tandy line. Hated to ask this but I do need the help
Hi Chuck . Would it be possible for you to do a video on attaching the Belt tip on the end of the belt by riveting. I have a belt tip with Three prongs on it which I know , I have to put the three holes in the end of the belt so the "prongs" go through the belt end and the rivets on the end of the prongs attach over the 3 prongs , But !! I`m not sure of the procedure with the Green or the Blue Machine how it's done , (Probably because I`ve never seen anyone attach it this way ). 😁I would be very grateful if you Can you could just demonstrate the procedure how it's done please then there`s no mistakes.
It would be Awsome if you made a vid on how to get a nice consistent color on a dye by use it a dauber because I am not able to dye my leather by dip dyeing. And by the way your videos are so inspiring to me and I’m sore many more people.
Hi Jaron, Thank you for watching, we're so glad the videos have been helpful! Check out the video below where we dyed the arm guards using a foam brush. Hopefully this helps - I'll see if I can find a video where a dauber was used. ua-cam.com/video/31CqelRgm7M/v-deo.html
Your tutorials are very helpful. Thank you. Is it possible to set a snap using a screwdriver? If so, which type screwdriver do I use? I don't have time to go get a snap setter so I need to work in a pinch. :-)
Hi there, I've never tried a screwdriver but I would imagine a phillips head would work best because you want it to splay the post and then you'll want to roll the edges to securely fasten it. Not sure if that will work though but it's worth a try in a pinch.
I have a kind of crazy question. I am just getting things together to begin learning leather craft. I also have 7 month old baby in the house. What can I use to help reduce the hammering noise so I don't wake the baby?
Jady Fairless, Weaver and Tandy/Craftool both have a setter press with interchangeable setter dies. If you’re doing a lot of snaps, it’s worth the investment. The Tandy one is less expensive and still a really good quality. I’ve been using my Tandy/Craftool press for over 20 years.
@@listillolordoc7604 Thanks so much for the tip. I just want to run out and get everything....today!! LOL I am so anxious to get started. I'll be building my work station this weekend - then "a shopping I will go". : )
Hi Michael, The Line 24 snaps are bigger and stronger - the actual cap of the snap is larger on the 24 so they are great for heavy-duty items like belts. The line 20 are great quality as well just not quite as strong and the snap is smaller.
My posts usually collapse off center, I’ve only had a few pull apart, and a couple I was able to reset (with the same parts) and they’re still holding. I recently replaced the snaps on a combination lighter/knife pouch for my neighbour (yes I spelled it with the U as I’m Canadian, lol). I added an extra top set as he alternated between two different knives in it, and the taller set was too tall for the shorter knife. To get to my question, my line 24, and line 20 snaps were to big for the existing hardware to mate to. What other sizes of snaps are there?
Hi Robert, We carry the Line 24 snaps in a shorter post length, we'll link them below for you. The only other snaps would be Segma snaps but those are not very strong. I would recommend getting a shorter post Line 24 snap. www.weaverleathersupply.com/catalog/item-detail/02208-bk-1-4/bk-02208-4p-line-24-durable/pr_62602
Hi there, If the knife is really dull you may want to take it to a professional to get sharpened. If it just needs to be polished up then the easiest way to sharpen a round knife is to take a scrap piece of leather and put some jewelers rouge or a honing compound on the rough side of the leather and run the knife edge across the compound to remove any burrs and polish the edge. Check out our strop board and honing compound below: Strop Board: www.weaverleathersupply.com/catalog/item-detail/65-2943/leather-strop/pr_59898/cp_/shop-now/whats-new Honing compound: www.weaverleathersupply.com/catalog/item-detail/65-2734/micro-fine-honing-compound-bar/pr_59820/cp_/shop-now/whats-new
Hi there, make sure you're using the correct setter and that the post of the snap isn't more than about 1/8" longer than the material it's going through. If the snap post is too long, they tend to set crooked. Hope that helps!
Hi Keith, You can, depending on what you are looking at. You'll need to remove any top coat from the product you are re-dyeing by using a deglazer first, then you can dye the product and add a top coat. Just note that if the product is a dark color, you won't be able to lighten it- you can add more color but you can't take color away or lighten it. Hope this helps!
Hi Cheryl, It depends mostly on the strength you need. Something heavy duty will need the line 24 snaps because those are the strongest, next would be the line 20 and then for small items and items using thinner weight leather, you would use the segma snaps. The length of the post depends on the thickness of your leather, the snap post will need to be 1/16" - 1/8" longer that the thickness of he leather layers it is going through. Hope that helps!
@@WeaverLeatherSupply Here's the project I thought up. I have a bag of remnent strips I have already used for a project ( my second thing I've made since beginning leathercraft) that I thought maybe I could skive down and make work? (See pics) I'm just trying to fiqure out what all I need to make it happen.
I've always found the designation of snaps to be confusing/hard to remember "Line this number, line that number, etc." [edit] Ok, simple. Now I know. (never knew there was only 3)
There’s not just three.... I have 20’s and 24’s both were to large to mate to existing hardware on a repair job I did for my neighbour on his combination knife/light (zippo) pouch.
I hope that I am not overstating this, but your videos here will last for generations, they are timeless and amazing for learning. Thank you so much for what you do.
Wow, what kind words. Thank you so much!
CHUCK YOU ARE THE BEST, I HAVE LEARNED MORE FROM YOU THAN ANYONE ABOUT LEATHER WORK, I AM 80 YO AND JUST STARTED DOING LEATHER WORK. THANK YOU VERY MUCH
That is so awesome. We appreciate you following along and wish you the best in your leather crafting journey!
Love how you say "sales pitch". Honest and classy all throughout the video.
Chuck is so good he could sell you a car with no gas.
I'd say: Well written.
Chuck's excitement is infectious. I can't help hearing his voice say "Super easy" whenever I get stuck trying to figure out a problem.
Dear Jun Ahn: Don't you just love it? It's like dealing with a problem purchase at the store and then the cashier utters, "No problem."
I am so new to leather work that ANY and ALL information I can get is GOOD information. It’s all good to have access to it. I love it and am learning from many.
Full disclosure. I was getting frustrated with my snaps bending and not setting despite not sacking the crap out of it. I put this video on and it set just fine. You’re a calming presence when I work it seems
Thank you! I love all the tidbits!! You kept is so simple really appreciate it!! 😊
I've had some disasters trying to set snaps. Thanks for the tips, really helpful.
Yes, cant agree with you more. Now I can order more and do it his way .He is a great teacher. I've tried to do it under outher so called internet In- lighters. Screwed up too many of them and now I have to order more.😎.its cool
If any post is too long, just file or grind it shorter. A little practice on scrap leather and snap posts never again bend over. I really like The Leather Element. You all do a much needed service Thanks, Chuck
Thank you, Stan!
tyvm i was fearing the snap. i ordered some very cheap ones and they just crumbled. my boyfriend tried who was a pro and he got very frustrated. ty i wrote it all down and now know how to buy. you are the greatest
THAnKS so much for this video! I have spent about 2 hours trying to figure out how to put a snap in a small keychain! I was on the verge of just giving up! After watching your video there might just be some hope for me and snaps! I made the mistake of purchasing EXPENSIVE snaps at a hobby store - that is probably what has caused me so much frustration. THANKS again!
Glad it helped!
Thanks for another instructive video Chuck. I agree with some others, close ups would greatly enhance your videos. I was not familiar with the last snap and could not see it clearly.
Thank you the snaps have been a right pain in the butt for me. Because I'm a novice and using leather offcuts for now, but A few things that I've made have sold very well. thanks to watching you make it all work out well.
Thank you so much - we're so glad the videos have been helpful!
What a genuinely wonderful human being.
Love all your videos! They’re great!
I would say some close up shots of what you are working on would be awesome.
Also, slow down a bit lol
It’s not a race lol
Yes that will make the video longer but it would help us the viewer understand better. If you think the video is too long make it a two part or series of 3 or more. I for one would watch a series by you and I’m certain most others would as well. You could also make two separate videos through the editing process. One that’s less than 10 minutes and the other that is either 20 minutes long or is a 2 part video
Thank you for making The Leather Element videos, because of those videos I’ve actually been able to learn leather craft and now make exquisite pieces.
Cheers mate
Thanks so much for watching and for the suggestions! We will keep that in mind for future videos.
I finally found some line 24 snaps with a decent length post! (On ebay, not the leather supply shops I generally use) now all of a sudden they are easy to use, no more having to shave the back of the leather to ensure enough bite occurs when setting them!
That fixes my old El Paso costume leather shoulder holster for a 4 inch Colt Python. The snaps came off the speedloader pouches. That holster is about 35 years old and still in great condition, as opposed to that mass produced junk made my Galco. I am making Steve McQueen Bullitt style upside down holsters now. Safari and everyone else quit making those holsters back in 1980. I love that holster design! It is reliable, trustworthy, safe, and super comfortable. Lesson learned about crappy eBay snaps. No more no name Asian made garbage snaps!
Thank you very much for actually teaching me how to do these snaps I've waited a long time to do this right, I've got the kit with all the stuff .I couldn't do it with other people training . thank you.!!! anyway thank you very much it really helped out somebody that is in the MR category . W/ out sounding cornny ,you are a very ,oh no, you are a great Teacher.you have been bleesed by the blood of the Lamb.
Thanks for the guidance. I'll be sure to keep a copy at hand and work to avoid ruboff. Sweat from hard work causes the most problem, so I may change to nylon belt for those times, mowing, digging etc. Much appreciate your suggestions and look forward to more videos. Great info. Cheers.
Lol, I feel like you made this video just for me. Thanks Chuck and the whole Weaver gang!
Dear Psychedelic HIp: I think that 184, 000 subs think the same way.
I've learned on line 20/24, if you post is crushing (I have a Barry king setter and arbor press for both) take a countersink drill bit and run it in reverse to start the bell. Works great everytime. Now segma snaps one side always crushes and I've yet to get the hang of them.
Chuck, I think it would make a good video for you to show how you remove/replace snaps. Thanks for all your videos.
I love watching these videos except for one thing, close up shots.
Close ups (in my opinion) would be more informative to people.
Also how do you measure for a shoulder rig if you know?
Also, slow down a bit lol. It’s not a race lol
@@prepperjonpnw6482 Well, if you can deal with him sounding like he's having a stroke you can just slow down the video to 0.75, or even 0.5.
Keep your opinion to yourself. I watch this stoned af. If I can keep up you should be able to.
I agree. It is hard too see the tools and the snaps at that distance. Also the snap types are different.
Thank you for making these videos. I really appreciate it.
Thank you! I've been struggling with snaps for a while now and your clear, to the point video gave me just the tip I needed. Subbed!
I love this guys brody inflection.
Thanks for the video. I think I just bought cheap snaps in the past, and got what I paid for!
I have found that if you are having trouble setting the line 20-24 use a Philips screw drive first. Place the screw driver on the post and give it a light tap. this will flair out the post and finish with the setter, this will set the post with a rolled star holding the snap.
Good to know! Thank you, Lenny!
Thank you, this is just what I was looking for
OH hey, I just thought of something that would really help me. I work on my dining room table and would love some organizing and essential tools tips. I'm forever getting something unwanted on my work. maybe tips on fixing uh-ohs.
Thank you for the suggestion!
always great and very informative I really appreciate these vids!
Oh snap! You can also use the flat side of the anvil on the male side of the line 20/24 snaps if you don’t have the granite slab. The same goes for the sigma snap anvil too.
More questions: Can I use a line 24 snap on thin leather if I shorten the posts? Grind them down. I like the very wide cap for design reasons. No one makes a short post line 24 snap (that I have found). If it is ok, how much of the post has to extend through the male and female pieces? Like double capped rivets? I will try it on some scrap leather to see if it works.
Good information and good video explanations. I have several leather knife sheaths that have snaps that say, the great state of Oklahoma on them. Do you happen to know where I can find those to purchase? They are 9/16 line 24. Thank you for the great video.
Does Weaver have a downloadable pdf guide, I have forgotten what you said 5 minutes after seeing this informative video. Thank you
Thanx for this... it helped me repair my leather knife sheath... :)
Thanks for the video, great help!
Glad it helped! You're welcome.
Fantastic video. Thanks for this.
Glad you enjoyed it!
Thanks Chuck another good one🤠👍
Thank you, Ty!
Would you consider doing a set of working chaps, with how to measure them?
Starting to feel that last tip lol, the requests 🤣
Muchas cosas que he aprendido en este sitio web y muy satisfecho
Gracias 👍
I have a leather wallet that was given to me in 1978. Very durable. I've purchased several other wallets over the years but I always come back to this one. After 40+ years one of the caps came loose from the base. I bought a pack of snaps at a discount store and can't get them to stay installed. No idea what size they are. Doesn't say anything on the package re size. If I bought 24's and the originals are 20's, are they interchangeable?
Thanks Chuck. Suppose you had to remove one side or the other. How can that be achieved without damaging the product?
Aloha! Love your vids. Could u suggest what we can do with the skived pieces of suede that are leftover? Mahalo from your fan in Hawaii 🌞🥥🌊🏖️🌺
Just what I needed, thank you!
Thank you, glad this was helpful!
Thanks. Very useful information. I've seen people just flatten snaps with a hammer and get frustrated when they ruined their project. Just have to get the right tools. I'm frustrated and hesitant making belts and straps for friends, only to find out their clothing is ruined from dye running on to them. I' ve no clue as to what I should coat my leather to prevent it from running. Could you please refer me to a past video or just tell me what to use? I'm only using black or brown oil dye. Cheers.
This is a tough one that we all deal with. You’ve got the right dye going so I can only suggest two or three things that will help. I keep a lightly oiled cotton rag (Neatsfoot) in my shop (in a baggy so it doesn’t evaporate) and, once my project is dyed and dry, I’ll rub down the entire project, front sides and back. The light oil in the rag is enough to get a bit of oil in the leather, but, not enough to where it spots. Also, rubbing down with the oil cloth is more cleaning than oiling so pay a little extra attention to the edges and flesh side (back). Once dry there (almost immediate) use a good top coat on the top grain, edges and back, and, while rubbing or buffing this in, you’re cleaning a bit more. This will knock out about 99% of the rub-off. Unfortunately, we all sweat, it rains, there’s humid days and whatever goes in the leather will come out and dark brown, or black, is the worst, but, run a rag down the edges and across the back after the above is done and I think you’ll be surprised. I hope this helps!
Why isnt there copper snaps to go with copper rivets you may be using say on a knife sheath. Im thinking maybe because its too soft? Has to be plated? I really dont know. Ive only found antiqued copper which is prolly not copper at all. Id like to match all the furniture.
Great tutorial, thanks!
Thanks Chuck, ya cleared away my setter fog. :-)
Thanks!
Hi Chuck! Do you happen to have a colour mixing chart for the pro dye? I'm trying to make royal purple. Thanks for all you do.
Hi Tracy! Check out the video below and see if that helps. If not let us know and we'll see what we can do for you!
ua-cam.com/video/sHD3bJMJ9Q4/v-deo.html
I've watched your video on removing snaps but am having difficultly with ones that are domed on both sides. The tip of the awl keeps sliding off because of the slope. Any tips please. I need to fix a bracelet I made using your instructions for the square link cuff.
I've always been taught to turn the post around in a circle and do many, many soft blows. Whenever I try to do the two or three hard blows, the snap post always curls crooked, ruining the snaps. I've actually done a dozen project without snaps to avoid using them. I wish I had the money for a snap setter (the pull down, perfect snap every time kind).
Love your informative videos -thank you for them. I am trying to put a snap on a piece of heavy leather (an axe sheath that gets a rough workout in the back of a pickup) The strap is slightly lighter leather and is no problem. But when I've punched my hole in the heavy leather, the post barely protrudes through and into the snap - not nearly enough to set it. The post measures about 3/8"in. and is the standard Line 20 post. I've tried to buy longer posts - maybe a 1/2" from both Weaver and your competition, but no luck - no-one seems to sell longer posts. How would you solve my problem? Thanks.
WOULD YOU HAPPEN TO KNOW WHAT I CAN DO ABOUT THE GREEN CORROSION THAT KEEPS APPEARING ON MY HOLSTER BRASS SNAPS?? PLEASE HELP.. THANK YOU
I would replace the brass with nickel, you’re likely having an issue with residual chrome salts from the tanning process. The nickel may corrode too, but that’s where I would start.
I woul like to know if do you make personalized stamp and where can I by accessories online? Thank you!
I want a good HAND press for setting snaps. The hammer and anvil works, but I can’t get them set evenly. The presses are so expensive. So I’m looking for a hand press that works well. Suggestions?
Thanks again Chuck....
Question. Please help.
I have a jacket with snaps on the end of the sleeve. I need another male end about another half inch in so the sleeve will actually close enough to not fall down over my hand. How do i know what size male end i need?
Something tells me Chuck has had alot of people asking him to repair leather stuff 😋😋😋
I have a lot of tools for setting but they are all Tandy. Could you please send the information on what numbers your tool are equal to in the Tandy line. Hated to ask this but I do need the help
Hi Chuck . Would it be possible for you to do a video on attaching the Belt tip on the end of the belt by riveting. I have a belt tip with Three prongs on it which I know , I have to put the three holes in the end of the belt so the "prongs" go through the belt end and the rivets on the end of the prongs attach over the 3 prongs , But !! I`m not sure of the procedure with the Green or the Blue Machine how it's done , (Probably because I`ve never seen anyone attach it this way ). 😁I would be very grateful if you Can you could just demonstrate the procedure how it's done please then there`s no mistakes.
You're telling me these 1/2 inch post line 20 snaps will work on 3/4 oz. I'm having trouble with 3/16 snaps sliding
It would be Awsome if you made a vid on how to get a nice consistent color on a dye by use it a dauber because I am not able to dye my leather by dip dyeing. And by the way your videos are so inspiring to me and I’m sore many more people.
Hi Jaron,
Thank you for watching, we're so glad the videos have been helpful! Check out the video below where we dyed the arm guards using a foam brush. Hopefully this helps - I'll see if I can find a video where a dauber was used.
ua-cam.com/video/31CqelRgm7M/v-deo.html
I get the package and it has all what I need from Michael’s.
A concha with two studs on the belt has lost one fastener. Where can we get this taken care of?
Is there a way to make a snap double sided? So you can snap on both sides? Like using a rivet instead on heavy duty snaps?
I've got some conchos that set like the last set of snaps that I'm very worried about.. I've never done it before.
Your tutorials are very helpful. Thank you. Is it possible to set a snap using a screwdriver? If so, which type screwdriver do I use? I don't have time to go get a snap setter so I need to work in a pinch. :-)
Hi there,
I've never tried a screwdriver but I would imagine a phillips head would work best because you want it to splay the post and then you'll want to roll the edges to securely fasten it. Not sure if that will work though but it's worth a try in a pinch.
@@WeaverLeatherSupply Thank you very much. Happy New year 🎉
So, what is a 'glove snap'? Is it another name for a Segma snap? Information is sketchy on the internet and I have gotten no quality answers.
Hi Bruce,
Yes, glove snaps and segma are essentially the same thing - just two different names.
thank you
I have a kind of crazy question. I am just getting things together to begin learning leather craft. I also have 7 month old baby in the house. What can I use to help reduce the hammering noise so I don't wake the baby?
Jady Fairless, Weaver and Tandy/Craftool both have a setter press with interchangeable setter dies. If you’re doing a lot of snaps, it’s worth the investment. The Tandy one is less expensive and still a really good quality. I’ve been using my Tandy/Craftool press for over 20 years.
@@listillolordoc7604 Thanks so much for the tip. I just want to run out and get everything....today!! LOL I am so anxious to get started. I'll be building my work station this weekend - then "a shopping I will go". : )
Jady Fairless, good luck and I hope everything works out for you.
Can the cap and or post be cut to fit the leather. How much of the post or cap has to protrude to get proper spreading.
How do you determine what size or type to use?
How do you determine what snap you need. I do projects from 3oz to 8oz. Obviously the same snap won't work for each project.
What mm size punch for the L24 hole
Is there a significant difference in strength and longevity between the Line 20 and 24? Or is it more a personal preference in look and size?
Hi Michael,
The Line 24 snaps are bigger and stronger - the actual cap of the snap is larger on the 24 so they are great for heavy-duty items like belts. The line 20 are great quality as well just not quite as strong and the snap is smaller.
Is there snaps made for 1mm to 1.3mm leather?
Thank you I’m trying to make faux leather bracelets!
TY
You mention weight is that ounces per square Inch?
Muy bueno maestro
Very helpful. However I a close up of the individual parts would have helped.
Oh snap! That's easy.
My posts usually collapse off center, I’ve only had a few pull apart, and a couple I was able to reset (with the same parts) and they’re still holding. I recently replaced the snaps on a combination lighter/knife pouch for my neighbour (yes I spelled it with the U as I’m Canadian, lol). I added an extra top set as he alternated between two different knives in it, and the taller set was too tall for the shorter knife.
To get to my question, my line 24, and line 20 snaps were to big for the existing hardware to mate to.
What other sizes of snaps are there?
Hi Robert,
We carry the Line 24 snaps in a shorter post length, we'll link them below for you. The only other snaps would be Segma snaps but those are not very strong. I would recommend getting a shorter post Line 24 snap. www.weaverleathersupply.com/catalog/item-detail/02208-bk-1-4/bk-02208-4p-line-24-durable/pr_62602
Off topic, How do you sharpen a round knife. I purchased an Al Stolman round knife and it arrived dull. I’m done with Tandy.
Hi there,
If the knife is really dull you may want to take it to a professional to get sharpened. If it just needs to be polished up then the easiest way to sharpen a round knife is to take a scrap piece of leather and put some jewelers rouge or a honing compound on the rough side of the leather and run the knife edge across the compound to remove any burrs and polish the edge.
Check out our strop board and honing compound below:
Strop Board: www.weaverleathersupply.com/catalog/item-detail/65-2943/leather-strop/pr_59898/cp_/shop-now/whats-new
Honing compound: www.weaverleathersupply.com/catalog/item-detail/65-2734/micro-fine-honing-compound-bar/pr_59820/cp_/shop-now/whats-new
my snaps keep ending up crooked, any way to avoid this?
Hi there, make sure you're using the correct setter and that the post of the snap isn't more than about 1/8" longer than the material it's going through. If the snap post is too long, they tend to set crooked. Hope that helps!
thank you You are a pro!
Do you have a video for dummies? Lol
Could you show the snap up close before setting please !
Please zoom in further.
Can you re-dye leather a different color and if so how?
Hi Keith,
You can, depending on what you are looking at. You'll need to remove any top coat from the product you are re-dyeing by using a deglazer first, then you can dye the product and add a top coat. Just note that if the product is a dark color, you won't be able to lighten it- you can add more color but you can't take color away or lighten it. Hope this helps!
How does one know when to use what size, and what type?
Hi Cheryl,
It depends mostly on the strength you need. Something heavy duty will need the line 24 snaps because those are the strongest, next would be the line 20 and then for small items and items using thinner weight leather, you would use the segma snaps.
The length of the post depends on the thickness of your leather, the snap post will need to be 1/16" - 1/8" longer that the thickness of he leather layers it is going through. Hope that helps!
@@WeaverLeatherSupply Here's the project I thought up. I have a bag of remnent strips I have already used for a project ( my second thing I've made since beginning leathercraft) that I thought maybe I could skive down and make work? (See pics) I'm just trying to fiqure out what all I need to make it happen.
Should have showed close ups of the snaps
maybe I just need a longer setting tool. no way I can set a line 24 in two hits. and i use that same size rawhide mallet, or bigger.
I'd really like help with concho rivet to snap conversion. 🌞
Hi Sonya,
We are working on getting a screw in that can convert conchos to a snap so we'll keep you guys updated. :)
@@WeaverLeatherSupply Oh my! Thank you very much! I'll be following. 🌞
Why are you yelling at me?!
J/k love the enthusiasm!
🥰🥰🥰
Thanks a lot :D I really got frustrated
I've always found the designation of snaps to be confusing/hard to remember "Line this number, line that number, etc." [edit] Ok, simple. Now I know. (never knew there was only 3)
There’s not just three.... I have 20’s and 24’s both were to large to mate to existing hardware on a repair job I did for my neighbour on his combination knife/light (zippo) pouch.
If I'm not mistaken, there's a line 16 also.