HOW TO VERIFY ZAMDON TOROIDAL SOLAR INVERTER AC INPUT CONTINUITY | SONSONTECH

Поділитися
Вставка
  • Опубліковано 15 вер 2024
  • To check the AC input continuity of the Zamdon 48V 3kW inverter, follow these steps:
    1. Ensure that the inverter is turned off and disconnected from any power source to avoid electric shock.
    2. Locate the AC input terminals or connection points where the inverter is connected to the AC power source (such as a generator or grid power).
    3. Use a multimeter set to the continuity or resistance testing mode. Ensure that the multimeter is functioning properly by testing it on a known circuit first.
    4. Touch one probe of the multimeter to one of the AC input terminals of the inverter and the other probe to the other AC input terminal. The multimeter should display a low resistance value or beep to indicate continuity, which confirms that there is a complete path for the current to flow through the AC input circuit of the inverter.
    5. If there is no continuity or a high resistance reading, there may be an issue with the AC input connections, cables, or internal components of the inverter. Check for loose or damaged connections, frayed cables, or any visible signs of damage.
    6. Repeat the continuity test for each of the AC input terminals to ensure that there is continuity throughout the AC input circuit of the inverter.
    7. If you are still unable to find continuity or suspect a fault in the AC input circuit, it is recommended to contact a qualified electrician or the manufacturer for further assistance.
    By checking the AC input continuity of the Zamdon 48V 3kW inverter, you can ensure that the inverter is properly connected to the AC power source, which is crucial for its operation and efficiency.
    You can buy the inverter here
    follow this link 👉 mycollection.s...

КОМЕНТАРІ • 3

  • @displaylou
    @displaylou Місяць тому +1

    Maraming salamat lods at ginawan mo pa talaga ng video ha yung aking comment😊 really appreciated! Actually nakabit ko na yung AC input at na test ko na rin sa battery charging, ang kaso ang taas pla ng konsumo from Meralco. Kaya nilagyan ko nalang ng breaker para on ko nlang pag kailangan talaga ako mag charge from the grid.

    • @Wilsonsontech
      @Wilsonsontech  Місяць тому

      oo mas malaki ang consumo kapag nagcharge ka sa grid,, kaya hanggat maaari sa solar lang magcharge

    • @Wilsonsontech
      @Wilsonsontech  Місяць тому +1

      kailangan ng content lods haha kung pwede lang video na lahat ng reply ko haha