Satisfying DIY plastic bottle cutter project, You May Regret Not Trying This!
Вставка
- Опубліковано 7 вер 2024
- You can cut plastic bottle strips more precisely than ever. Believe me, you feel pleased to do this project. assembly is straightforward, and parts are easily available in hardware stores. The links for STL files are below.
www.thingivers...
Parts list
2 X 6202 bearings, jam them with epoxy after sharpening
4 X 608 bearings.
2 X mk 8 threaded rod length shown in the video with 6 nuts,
1X rod 7 mm or 8 mm, length should be greater than bottle height.
4 to 4,5 mm nut bolts as required.
3 bearings 607 for bearing body.
👍💯👍💯👍💯👍💯👍💯👍
lo vendes totalmente montado?
No eu não, mas você pode fazer isso sozinho
hola, necesitaria saber que revoluciones por minuto (rpm) lleva el motor 775, para poder hacerme esta maravillosa maquina. gracias
Gracias por su me gusta, las rpm no importan mucho, simplemente haga funcionar el motor de 12 voltios a 18 voltios, hará su trabajo y cuando lo haga quedará satisfecho con su rendimiento.
muchas gracias, a la espera de las piezas, ya le contare como me ha ido cuando lo termine
@@M.SKhan123
Hola, tienes alguna lista de las piezas necesarias para este proyecto?, me interesa armarlo, mientras tanto estaré imprimiendo las piezas de thingiverse. Saludos!
La lista de piezas ahora se agrega a la descripción del video.
@@M.SKhan123 Muchas gracias!, te comento que tal resulta!