On the Steele Grinder, Blacksmith Supply says it will fit an 8" contact wheel. www.blacksmithsupply.com/84-Engineering-Alec-Steel-Grinders_c_104.html use code: bear5
Thanks for leaving the overheating part in the video. It helps keep beginners like me from getting discouraged by our mistakes because it shows that even experienced smiths make mistakes and that just because a error was made, it doesn’t mean the project isn’t able to be saved.
When I saw the little bit of sparking and fumes on the blade I thought, "oh dang, that doesn't look good." It reminded me of my first blacksmithing session in my dad's coal forge when I learned that you can burn steel if you don't pay attention.
Great looking Spike Tomahawk you made John. Thanks to Blacksmith's Supply for sponsoring this video and sending you the Steele 2X48" belt grinder, that's going to be an awesome seller I think. It is such a room saver and so usable in a smaller shop. Really enjoyed watching you fabricate this Spike Tomahawk and saving the project . Thanks for sharing with us, stay safe around there. Fred.
Nice to see the ol’ coal forge up and running during this brisker time of year. I like seeing these mono-steel tomahawk/tool videos, as I’m not a very good welder yet. Another excellent video sir.
Greetings from Ireland. I love your videos, you have a great way of explaining things that is easy to follow. Could you perhaps do a video sometime about all the different steel's and their uses and go through their tempering properties such as oil hardening, air hardening ect.
Could watch a hundred videos of you making axes john I just can’t get enough I try to do each one myself I’ve done the hammer into blacksmith axe with the cross peen on back and today did 90% of the railroad spike axe done and once that’s done gonna try the one you posted with the 01 tool steel with no weld next will be the wrapped eye as I’m getting pretty confident with my forge welds your a amazing teacher and being part of the new generation of blacksmith appreciate each and every one of these videos, also love your tool making videos,and every other type of videos.. I’m on my second to third time watching most of your videos
I wonder why no blacksmith is using a spokeshave to create the handle. It is very fast and creates lovely shavings instead of all the dust and noise. Very nice Tomahawk though 😊
My grandfather was a blacksmith. Spent a lot of time growing up in his shop on the farm,so I really appreciate watching videos like this. Would love to have my own little shop to do this sort of craft.
My dad and I have been watching your channel for a while now and its been really nice to bond with him over this. He told me his great grandfather was a blacksmith, and we've been thinking about getting into it and your channel has been a great starting place. Thank you. 😊
It sucks that the material got over heated, but it's refreshing to us beginners that it can happen to anyone. Thank you for the transparency and the amazing videos!
Very pretty. I'm a woodworker but I enjoy watching blacksmithing. that is a good looking belt grinder. I think it would do as well in a wood shop. It's a bit pricey at $1685 though. Thank you for sharing. Have a great day and stay safe.🙂🙂
That’s a handsome little tomahawk! The return of the Steele belt grinders is timed just right to give me buyers remorse on pulling the trigger on the Grizzly 2x42. Especially because the Grizzly was DOA, and I’m still waiting on the replacement. Sure, the Steele is 4x more expensive, but it has *way* nicer features, and the build is clearly beefier. Wishing I’d saved up and got that, I just didn’t know they were still making them!
This is generally known as a boarding axe, commonly used back in the tall ship Era used to help sailors board other ships, by using the spike end to dig into the wood.
I picked up an old 2x48 a couple years ago, and love it. Hands down, it's proven to be the go-to grinder for the shop and my 2x72 can only look on forlornly. I probably do 50/50 wood and iron work with it. You can't have too many belt grinders in the smithy. One trick I developed over the years to save a whole slew of time on the handles of tools is to take them down to 120-grit.... and then run them through the wire wheel on the bench grinder. There is simply no better finish, imo, and how it feels in the hand is something you just have to try for yourself. Even on store-bought tool handles, the wire wheel makes quick work of getting rid of that nasty plastic finish they put on them, and leaves you with a texture that's second to none. Add two coats of pine tar thinned down with turpentine, and you've got a tool that looks good and feels fantastic!
Great project and video, good advice in the video, I really like the part where you had the overheat accident and showed how to take care of the problem. I've seen people that would have trashed the whole project and started over but you showed that even when a person makes a mistake they can repair it, modify the project and still have a good tool or wall hanger either one. I also really liked the way you showed how to shape the head at the handle and the advice about using the vise. Thanks for all your hard work and the information you put into your videos.
As usual a good video. It is showing the real way the things are happening. Sometimes not as attractive, sometimes with mistakes. All good things require patience, skills and hard work. We can always learn something. Thank you!
Great video and sweat hawk, John. I love this voiceover style video, the crisp sound quality of your voice makes it easy to listen to and follow along. I look forward to more axe builds from you. And congrats on the mini Alec Steele grinder. When I was shoping for one, that little 2X48" caught my eye because of how affordable it is. I ended up going with the full-size 2X72" Steele ginder and have been very happy with it, especially after I wired my shop for 220 to get full power out of the motor and built a custom bench and tilting stand for it. The big one comes with a third, 5" contact wheel on the flat platen. Either way, you are getting a solidly built grinder with a lot of functionality for a great price compared to other grinders out there.
I've just made my first proper steel order and have some stock coming that's perfect for a project like this! No more being beholden to box store dross steel and the pitted scrap that's buried around the smallholding
Absolutely beautiful project! And if the handle feels a little small, might be a great time to try a leather wrap around that portion, although it looks great as-is!
I've found that a hardwood block shaped to hold the hatchet head, or workpiece in general, with neodymium magnets mounted flush with epoxy to hold them in place works really well. Of course it's not practical for a one off, but if you find a style you want to repeat... A thin leather cover glued to the block to finish it off adds traction and protects the surface while you work.
John, appreciate you mentioning how long you had been forging when you cleaned out the forge clinker. As a beginner it helps set realistic time lines for the work I do. And as always, thank you for the educational videos keep them coming.
I like that grinder I have a propeller repair shop here in Alaska and beat on props with pitch blocks and then weld up damages areas and grind down. That belt grinder looks perfect for doing the hard to reach weird design areas on props. Please send me the one they sent you asap!!
Fantastic work sir! It's so refreshing to see a forging video with a real blacksmith actually FORGING and shaping the metal, and with a hammer no less. 95% of these kinds of videos that I've seen are just some A-hole using a powerhammer to make a flat bar of steel and cutting out the shape of a knive, or whatever. You are a true craftsmans!
It really looks good. Glad you left the oops in the video, still shows good smith's make mistakes. I think the handle fits this better after the oops, the handle looks like ut would have been alittle small if all the mass was still in the piece
It's good to see some quality hand work where just about every other video out there makes it seem like you can't do good work without a giant power hammer
John, it's always a pleasure watching you work. What's the difference between punching and drifting? You mentioned both processes, and while the answer seems obvious... I'd like to hear your definition/explanation. Thank you for sharing your skills and knowledge!
Great video. I wonder if you could use a 12” contact wheel, just running it on a longer arm, and using 2x72 belts. It should work, provided the tool arm doesn’t get any vibrations/harmonics. I bought a Vevor (Chinese) 2x82 ( good luck getting those belts, but 5 minutes measuring and one with the grinder had the extra arm length cut off to run 2x72s). It runs great, and I still can’t figure why other brands are 3-5 times the price. The biggest issue was the unsealed electronic control box (the motor is sealed). I just drilled a few holes in a click-lock food container, stuck the controller in it, and sealed it up with copious amounts of hot-glue. Worked a treat. Cheers from Tassie.
I delayed it for many years. But... Finally, I have the time now to get a forge up. Anyone have recommendations for a "budget" coal forge set up? The propane budget video is great and probably what I will first start working at home. But my heart lies with old school forging.
There are 10.000 ways to make a handle .I dont use steel wedges to secure wooden ones or the glue i like to use a small flat head wood screw -i drill a hole for the root of the screw just on a split line between wood wedge and a handle -screw in the screw and it will never come out.Its the same techniqe that is used in securing shaft and pulley on machines.Or when you want to stop something from rotating .Works great. Also i soak the wood in linseed oil and apply it once a year.Its great for wood and it keeps the wood from swelling in moisture or drying during summer. If you dont have the scraper(i know they are cheap but maybe amazon asks 2x the price of scraper for shipping and customs alone)you can use japanese body kit spatulas that you can get in most hardware stores for dirt cheap -you dont even have to sharpen them and they are made out of high carbon steel.Plus you can use angle grinder or a file and make any profile you want .
Quite a few actually. If you use the UA-cam search bar and type "black bear forge punch" or "black bear forge drift" you should have several options to chose from
@@BlackBearForge perfect. Thank you. And thank you for the invaluable amount of knowledge. I have learned from you so far. I started doing this just because I wanted to make knives, I have found that decorative and functional blacksmithing is incredibly entertaining, and honestly honestly a whole lot less grinding. 😂
Yeah. I definitely wouldn't buy it. when I first started forging a guy at work gave it to me saying he thinks it would be a good quenching oil. Right now I'm not trying to put too much money into my smithing hobby. Since I'm not making any money from it. So when somebody's willing to give me free stuff or stuff or stuff really cheap. i have been taking it Thanks you
@@Lev53420 Now its a cutting oil which is not cheap by all means so if i were you i would use a small quantity and try it out .If its not working you can always use it as a cutting oil or sell it and buy a real thing.If price is right a small hobby guys might be interested in it as long as its not contaminated.
@BlackBearForge love these videos! I recently saw a UA-camr use an axe that was forged with an integrated overstrike guard. Any chance you could show us how you might do something like that?
John, love watching your videos. I have learned so much from your easy teaching style. May I ask what the radius on your top fuller used in this video is? Thank you for sharing your wealth of knowledge!
Hey Mr.John, i just want to say that your skills are absolutely amazing and completely inspiring to us rookies that are learning to blacksmith. I have to ask you a question about your gas forge. What brand of burners are you using on it and what brand of forge is it? On top of this, I would like to know the specifics on how you have the inside of your gas forge set up if it is a custom built gas forge. Please let me know. Thanks so very much.
My current forge is a ribbon burner forge made by Dark Star Forge. You can find them on Instagram. Previously I used a forge from Chili Forge, they have a web site.
What did you use to coat the tomahawk blade while you were working on the handle? It looked almost like some sort of resin. And how is it removed for the finished piece?
Great video John! Hey, I assume that the transparent brownish stuff I saw in a couple views is a protective plastic dip? Who makes it and where can I get some? Happy Easter!
On the Steele Grinder, Blacksmith Supply says it will fit an 8" contact wheel. www.blacksmithsupply.com/84-Engineering-Alec-Steel-Grinders_c_104.html use code: bear5
Thanks for leaving the overheating part in the video. It helps keep beginners like me from getting discouraged by our mistakes because it shows that even experienced smiths make mistakes and that just because a error was made, it doesn’t mean the project isn’t able to be saved.
Glad it was helpful!
When I saw the little bit of sparking and fumes on the blade I thought, "oh dang, that doesn't look good." It reminded me of my first blacksmithing session in my dad's coal forge when I learned that you can burn steel if you don't pay attention.
Very nice work John, even with the "oops", thanks for leaving those in there. Helps me feel better knowing even masters make mistakes.
I agree with you totally. It shows no matter how long you do something you can still mess up and when you do it is not as big as you think it is
Great looking Spike Tomahawk you made John. Thanks to Blacksmith's Supply for sponsoring this video and sending you the Steele 2X48" belt grinder, that's going to be an awesome seller I think. It is such a room saver and so usable in a smaller shop. Really enjoyed watching you fabricate this Spike Tomahawk and saving the project . Thanks for sharing with us, stay safe around there. Fred.
Nice to see the ol’ coal forge up and running during this brisker time of year. I like seeing these mono-steel tomahawk/tool videos, as I’m not a very good welder yet. Another excellent video sir.
That handle size is perfect for adding a leather or other material wrap.😎👍🏻
Agreed!
Greetings from Ireland. I love your videos, you have a great way of explaining things that is easy to follow. Could you perhaps do a video sometime about all the different steel's and their uses and go through their tempering properties such as oil hardening, air hardening ect.
Great suggestion!
Could watch a hundred videos of you making axes john I just can’t get enough I try to do each one myself I’ve done the hammer into blacksmith axe with the cross peen on back and today did 90% of the railroad spike axe done and once that’s done gonna try the one you posted with the 01 tool steel with no weld next will be the wrapped eye as I’m getting pretty confident with my forge welds your a amazing teacher and being part of the new generation of blacksmith appreciate each and every one of these videos, also love your tool making videos,and every other type of videos.. I’m on my second to third time watching most of your videos
I wonder why no blacksmith is using a spokeshave to create the handle. It is very fast and creates lovely shavings instead of all the dust and noise.
Very nice Tomahawk though 😊
I use a spoke shave for handles fairly often. But the belt grinder is a bit faster and doesn't care about grain direction in the curved areas.
My grandfather was a blacksmith. Spent a lot of time growing up in his shop on the farm,so I really appreciate watching videos like this. Would love to have my own little shop to do this sort of craft.
My dad and I have been watching your channel for a while now and its been really nice to bond with him over this. He told me his great grandfather was a blacksmith, and we've been thinking about getting into it and your channel has been a great starting place. Thank you. 😊
That is awesome!
leaving in mistakes is the best thing instructors do, the worst thing is making a mistake and not knowing what you should do to fix it
It sucks that the material got over heated, but it's refreshing to us beginners that it can happen to anyone. Thank you for the transparency and the amazing videos!
I can feel your handshake from here.
This was a masterpiece!
I've yet to make a handle from a wood blank. I think I'll add it to the bucket list. Thanks for taking us along 👍.
What a great little project/piece John! Thanks for sharing!
You are very welcome
Love the look John. That is a cool grinder for sure.
Very pretty. I'm a woodworker but I enjoy watching blacksmithing. that is a good looking belt grinder. I think it would do as well in a wood shop. It's a bit pricey at $1685 though. Thank you for sharing. Have a great day and stay safe.🙂🙂
Thanks 👍
I have a knifemakers grinder in my woodshop. With variable speed and the ability to tilt it for edge work, I don't know how I got by without it
That’s a handsome little tomahawk!
The return of the Steele belt grinders is timed just right to give me buyers remorse on pulling the trigger on the Grizzly 2x42. Especially because the Grizzly was DOA, and I’m still waiting on the replacement. Sure, the Steele is 4x more expensive, but it has *way* nicer features, and the build is clearly beefier. Wishing I’d saved up and got that, I just didn’t know they were still making them!
Love your videos ! I have learned alot from you ! Keep making more videos please !
This is generally known as a boarding axe, commonly used back in the tall ship Era used to help sailors board other ships, by using the spike end to dig into the wood.
I picked up an old 2x48 a couple years ago, and love it. Hands down, it's proven to be the go-to grinder for the shop and my 2x72 can only look on forlornly. I probably do 50/50 wood and iron work with it. You can't have too many belt grinders in the smithy.
One trick I developed over the years to save a whole slew of time on the handles of tools is to take them down to 120-grit.... and then run them through the wire wheel on the bench grinder. There is simply no better finish, imo, and how it feels in the hand is something you just have to try for yourself. Even on store-bought tool handles, the wire wheel makes quick work of getting rid of that nasty plastic finish they put on them, and leaves you with a texture that's second to none. Add two coats of pine tar thinned down with turpentine, and you've got a tool that looks good and feels fantastic!
Great project and video, good advice in the video, I really like the part where you had the overheat accident and showed how to take care of the problem. I've seen people that would have trashed the whole project and started over but you showed that even when a person makes a mistake they can repair it, modify the project and still have a good tool or wall hanger either one. I also really liked the way you showed how to shape the head at the handle and the advice about using the vise.
Thanks for all your hard work and the information you put into your videos.
Love the tomahawk! Great work as always. Really like the remote start dust collector too! That sounds like a good video subject too!😁👍
I do have plans to talk about that system, but it will likely be on my personal channel @JohnSwitzer
As usual a good video. It is showing the real way the things are happening. Sometimes not as attractive, sometimes with mistakes. All good things require patience, skills and hard work. We can always learn something. Thank you!
Mate, that is one sweet little axe. Nice job.
Thanks 👍
Great video and sweat hawk, John. I love this voiceover style video, the crisp sound quality of your voice makes it easy to listen to and follow along. I look forward to more axe builds from you.
And congrats on the mini Alec Steele grinder. When I was shoping for one, that little 2X48" caught my eye because of how affordable it is. I ended up going with the full-size 2X72" Steele ginder and have been very happy with it, especially after I wired my shop for 220 to get full power out of the motor and built a custom bench and tilting stand for it. The big one comes with a third, 5" contact wheel on the flat platen. Either way, you are getting a solidly built grinder with a lot of functionality for a great price compared to other grinders out there.
Turned out beautiful. Looking forward to that special chisel build. We shared this video on our homemade tools forum last week 😎
Wonderful for kindling next to a little woodstove, great work love your transparency 👍
Thanks!
Thank you for the support
84 Engineering do some great grinders. One of these days, I might actually be able to afford one.
Great looking tomahawk.
You could also use a curved platen in leu of a larger diameter contact wheel. Thank you for sharing!
Looks great.
I have yet to make one but. Coming soon.
Now i have the how too video
This would be very nice to be enlarged slightly for actual use on a battle belt. Excellent work once again brother! Happy resurrection day!
God bless~
Mate that is one sweet little axe Nice job.
Love the videos. Always enjoy getting notifications when you upload
I enjoy watching you work. Thanks for sharing
I've just made my first proper steel order and have some stock coming that's perfect for a project like this!
No more being beholden to box store dross steel and the pitted scrap that's buried around the smallholding
Very nice video! Thanks also for showing the grinder, it seems handy. 👍
Absolutely beautiful project! And if the handle feels a little small, might be a great time to try a leather wrap around that portion, although it looks great as-is!
Thanks for the tip!
Nice one John!!
I've found that a hardwood block shaped to hold the hatchet head, or workpiece in general, with neodymium magnets mounted flush with epoxy to hold them in place works really well. Of course it's not practical for a one off, but if you find a style you want to repeat... A thin leather cover glued to the block to finish it off adds traction and protects the surface while you work.
Sounds like a great idea
John, appreciate you mentioning how long you had been forging when you cleaned out the forge clinker. As a beginner it helps set realistic time lines for the work I do. And as always, thank you for the educational videos keep them coming.
Very nice work. Thí looks beautiful 😍😍
Happy Easter!
Very nice tomahawk!
I run a 8" contact wheel on my Steele 2x48. its definitely worth getting.
I like that grinder I have a propeller repair shop here in Alaska and beat on props with pitch blocks and then weld up damages areas and grind down.
That belt grinder looks perfect for doing the hard to reach weird design areas on props. Please send me the one they sent you asap!!
Looks great , thanks for sharing . I need a better grinder and my shop is small so I will have to look into this one
Very nice
Fantastic work sir! It's so refreshing to see a forging video with a real blacksmith actually FORGING and shaping the metal, and with a hammer no less. 95% of these kinds of videos that I've seen are just some A-hole using a powerhammer to make a flat bar of steel and cutting out the shape of a knive, or whatever. You are a true craftsmans!
A power hammer still takes a considerable amount of skill and is very much "real blacksmithing"
Very nice axe, glad you are still at it, up date on the cabin would be nice.
I should be back to the cabin this summer
Great video! I've got the 84 engineering surface grinder attachment and its a game changer
Great job, and nice tomahawk
Great job. Thank you
Thanks for watching!
Excellent
Great video.
It really looks good. Glad you left the oops in the video, still shows good smith's make mistakes. I think the handle fits this better after the oops, the handle looks like ut would have been alittle small if all the mass was still in the piece
If the axe had ended up larger I probably would have left the handle larger as well.
Nice Tomahawk 👍
Great teaching!!
Thank you!
As always great content!
Glad you enjoyed it
Great looking tomahawk, if the handle is a little small a tight leather wrap will fix that
really nice
It's good to see some quality hand work where just about every other video out there makes it seem like you can't do good work without a giant power hammer
Linda peça!❤❤❤❤❤
You’re a little bit good at this! Would love to see some collabs with British and German smiths. Obv very hard to realise, but you’re really good!
John, it's always a pleasure watching you work.
What's the difference between punching and drifting? You mentioned both processes, and while the answer seems obvious... I'd like to hear your definition/explanation.
Thank you for sharing your skills and knowledge!
Punching creates a hole and drifting refines the shape a hole that was punched, drilled or created by wrapping material back on itself.
Bravo 👏
World’s biggest clinker 12:12
That is about the size of the pocket ax of that era. Don't know if they had spikes but from all accounts they were handy. Nice work.
Nice
I'm leaving this comment to enhance your UA-cam algorithms. Hope it helps.
That axe model is called "Fire mans axe" here in Norway😊
A simple swinging treadle hammer would be a great addition for the primitive workshop.
I would like to add one, but I'm already running out of room
Great video.
I wonder if you could use a 12” contact wheel, just running it on a longer arm, and using 2x72 belts. It should work, provided the tool arm doesn’t get any vibrations/harmonics.
I bought a Vevor (Chinese) 2x82 ( good luck getting those belts, but 5 minutes measuring and one with the grinder had the extra arm length cut off to run 2x72s). It runs great, and I still can’t figure why other brands are 3-5 times the price. The biggest issue was the unsealed electronic control box (the motor is sealed). I just drilled a few holes in a click-lock food container, stuck the controller in it, and sealed it up with copious amounts of hot-glue. Worked a treat.
Cheers from Tassie.
The 2 x 72 uses a larger motor, so it might not work. Plus the cost of a 12: wheel would be quite high
I always wondered what the hole in a big anvil was for... and now i know
I delayed it for many years. But...
Finally, I have the time now to get a forge up.
Anyone have recommendations for a "budget" coal forge set up?
The propane budget video is great and probably what I will first start working at home. But my heart lies with old school forging.
There are 10.000 ways to make a handle .I dont use steel wedges to secure wooden ones or the glue i like to use a small flat head wood screw -i drill a hole for the root of the screw just on a split line between wood wedge and a handle -screw in the screw and it will never come out.Its the same techniqe that is used in securing shaft and pulley on machines.Or when you want to stop something from rotating .Works great.
Also i soak the wood in linseed oil and apply it once a year.Its great for wood and it keeps the wood from swelling in moisture or drying during summer.
If you dont have the scraper(i know they are cheap but maybe amazon asks 2x the price of scraper for shipping and customs alone)you can use japanese body kit spatulas that you can get in most hardware stores for dirt cheap -you dont even have to sharpen them and they are made out of high carbon steel.Plus you can use angle grinder or a file and make any profile you want .
Do you have a video on making punches and drifts? I’m really looking to see what the shape and profile looks like so I can try to re-create it.
Quite a few actually. If you use the UA-cam search bar and type "black bear forge punch" or "black bear forge drift" you should have several options to chose from
@@BlackBearForge perfect. Thank you. And thank you for the invaluable amount of knowledge. I have learned from you so far. I started doing this just because I wanted to make knives, I have found that decorative and functional blacksmithing is incredibly entertaining, and honestly honestly a whole lot less grinding. 😂
Awesome work as always! I was curious though as to what you put on the blade edge around the 18:00 mark while you were making the handle 🤔
Thats a hot melt coating made for protecting tools. Most industrial suppliers will have some version available
Do you think thread cutting oil would work for quenching? I have like 5 gallons of it already in a metal bucket.
It's Ridgid threat cutting oil
I really can't say for sure, but my guess is that it would work. May be more expensive than regular quenching oil though.
Yeah. I definitely wouldn't buy it. when I first started forging a guy at work gave it to me saying he thinks it would be a good quenching oil. Right now I'm not trying to put too much money into my smithing hobby. Since I'm not making any money from it. So when somebody's willing to give me free stuff or stuff or stuff really cheap. i have been taking it
Thanks you
@@Lev53420 Now its a cutting oil which is not cheap by all means so if i were you i would use a small quantity and try it out .If its not working you can always use it as a cutting oil or sell it and buy a real thing.If price is right a small hobby guys might be interested in it as long as its not contaminated.
Nice hatchet , might wrap the handle with leather.
Great vid are there any tricks when working with thick metal in the coal forge
Just a good fire, deep and clean
@BlackBearForge love these videos! I recently saw a UA-camr use an axe that was forged with an integrated overstrike guard. Any chance you could show us how you might do something like that?
I'll keep it in mind
Great video! Just found your channel!
Welcome!
John, love watching your videos. I have learned so much from your easy teaching style. May I ask what the radius on your top fuller used in this video is? Thank you for sharing your wealth of knowledge!
I think that was 1/2". But a little larger would work as well
Good tempo to the video
Happt Easter
Suppose you can make a peace pipe?
Hello from Maine
Morning!
Hey Mr.John, i just want to say that your skills are absolutely amazing and completely inspiring to us rookies that are learning to blacksmith. I have to ask you a question about your gas forge. What brand of burners are you using on it and what brand of forge is it? On top of this, I would like to know the specifics on how you have the inside of your gas forge set up if it is a custom built gas forge. Please let me know. Thanks so very much.
My current forge is a ribbon burner forge made by Dark Star Forge. You can find them on Instagram. Previously I used a forge from Chili Forge, they have a web site.
Do you need to quench the drifts?
If they get too hot I do, but a small axe like this generally doesn't heat them that much. They can be too hot to hold onto though.
Just wondering would used motor oil be good for Harding ???
Its generally discouraged due to the additives and impurities in the oil.
Great video. Would oak be ok for a handle?
It would be OK for a shorter handle such as this has. Probably not very good for a big felling axe.
What did you use to coat the tomahawk blade while you were working on the handle? It looked almost like some sort of resin. And how is it removed for the finished piece?
It's a hot melt coating designed for protecting tools. Most industrial suppliers carry something similar
Hey John, what's the stuff you put on the blade to prevent cutting yourself?
It's a hot melt coating for tool edges. Most industrial suppliers have a version of it.
@@BlackBearForge awesome, thank you sir!
Great video John! Hey, I assume that the transparent brownish stuff I saw in a couple views is a protective plastic dip? Who makes it and where can I get some?
Happy Easter!
The coating is a hot melt tool protector www.mcmaster.com/products/hot-melt-coatings/
What's wrong with using used motor oil? It does works just fine for me.
Is that hot glue on the edge while you were working on the handle?
Similar, it's a hot melt coating meant for tool edges