Bryan, Your video was the answer to my prayers. I also looked all over UA-cam land and viewed many other "supposed solutions" to no avail until watching your method. I'm here to tell you, that dad blame screw wasn't gonna come off with just a screwdriver cause it was screwed on too tight at installation. But after watching this video and knowing you had success with the channel locks, i decided I'd give it a try and it worked!!! I can't thank you enough!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
You are brilliant!! Here’s the thing though, mine still wouldn’t unscrew to the point metal shavings were coming off - I finally got a towel, put it on top, and turned the pliers over it and then it finally effortlessly unscrewed - it’s incredible just how badly they engineered these things…
Thank you sir for putting out this video. I been looking all over also and only your video has shared my frustration and likely my solution. Thumbs Up.
Every other video on this was made by an idiot... you sir were enlightened by God 😂... Thank you. I watched at least 10 other videos on this the last 20+ minutes fast forwarding to the end. This worked quickly...💪🏿
Now take the rest of it off so you can fix the leak around the drain. Our water leaked around the drain and down into our kitchen ceiling also... and yes we now have a hole in our ceiling too. The plumber told us that we would have to remove the entire bathtub to remove just the old drain. I don’t believe him.... can’t we just remove only the drain with a “barbell” type Tub Drain Wrench, replace it with a new drain, SEAL it down, so our bathtub will hold water again? Did you end up removing the entire drain??
Yes, we had a leak as well, once I got what I showed done, I removed the rest of the drain then cleaned the drain hole and applied new putty around the hole and put in the new drain....and so far (knock, knock, knock) after waiting 24 hours so all had plenty of time to set, we used the tub and have yet for it to leak 🙂...and yes that barbell tool is what we used as well, no tub removal etc...
Damn I swear it took me 1h and more than 20 videos to find you sir … very very thankful 🙏🏽🙏🏽🙏🏽
Glad the video helped, thank you for the feedback 😊
Thanks a bunch for posting this. Saved me a bunch of time and head scratching!
Thank you :-) I'm glad this video helped 🙂
You sir are the hero we need but don't deserve! I watched no less than 10 other videos today and NONE of them mentioned this!
Glad to been able to help!!! I looked as well and wasn't able to find any either :-)
Bryan, Your video was the answer to my prayers. I also looked all over UA-cam land and viewed many other "supposed solutions" to no avail until watching your method. I'm here to tell you, that dad blame screw wasn't gonna come off with just a screwdriver cause it was screwed on too tight at installation. But after watching this video and knowing you had success with the channel locks, i decided I'd give it a try and it worked!!! I can't thank you enough!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Glad to have been of help :-) Thanks for the feedback :-)
Thank you! This is the only video to address this problem!
Your welcome!! Glad it helped ☺️
Thank you!!! Mine was stucker than mama’s burnt cornbread in a cast iron skillet!
This is answer I have been searching for. Thank you so much!
My pleasure, glad to have been able to help!!!
Great video
Thank you!
Yes... Solved it for me too!THANKS !!!!💪🏽👊🏽💪🏽
AWESOME! GLAD to have helped!!!
You are brilliant!! Here’s the thing though, mine still wouldn’t unscrew to the point metal shavings were coming off - I finally got a towel, put it on top, and turned the pliers over it and then it finally effortlessly unscrewed - it’s incredible just how badly they engineered these things…
Awww THANK YOU!!! I am glad it worked 💚
Thank you sir for putting out this video. I been looking all over also and only your video has shared my frustration and likely my solution. Thumbs Up.
I am very glad to have been able to help, thank you for the feedback!!!
This is exactly what I was looking for.
Sweet :-) I hope others find this as they need as well!
THANK YOU!!!! I was so frustrated watching view after video, and you solved this for me!
Awwww thank you!!! Glad it worked :-)
Thank you! I have looked through so many videos, tried what they said, and this video was finally the answer to my problem!
That's great :-) Thanks for the feedback!!!
Thank you! Only video that helped!!
Thank you!! Glad it helped!!!
You just saved me, thank you.
YOU are welcome!!! Glad it was a help!!!
Thank you for this, I've been having the same problem! I couldn't get my crescent wrench in there, but a 15mm worked perfectly!
AWESOME!!! Thank you for the tip!! :-)
It worked thank you!
yes have had a few ro repair :) good job Bryan
Thanks Dad!!! Love ya man!!!
Every other video on this was made by an idiot... you sir were enlightened by God 😂... Thank you. I watched at least 10 other videos on this the last 20+ minutes fast forwarding to the end. This worked quickly...💪🏿
I looked as well and wasn't able to find any either :-) We are all blessed in His way :-)
Now take the rest of it off so you can fix the leak around the drain. Our water leaked around the drain and down into our kitchen ceiling also... and yes we now have a hole in our ceiling too. The plumber told us that we would have to remove the entire bathtub to remove just the old drain. I don’t believe him.... can’t we just remove only the drain with a “barbell” type Tub Drain Wrench, replace it with a new drain, SEAL it down, so our bathtub will hold water again? Did you end up removing the entire drain??
Yes, we had a leak as well, once I got what I showed done, I removed the rest of the drain then cleaned the drain hole and applied new putty around the hole and put in the new drain....and so far (knock, knock, knock) after waiting 24 hours so all had plenty of time to set, we used the tub and have yet for it to leak 🙂...and yes that barbell tool is what we used as well, no tub removal etc...
Thanks for posting. Are you able to get the seal back on or is there a way to replace it?
Yes, I used silicone sealant rolled it up into a long tube, placed it around the rim of the drain opening and put the drain back in
Thx bro reply me lol
My pleasure, thanks for the feedback :-)