Unfortunately no. But I sell a battery the size of a motorcycle battery supports a 5k system. Perfect for baggers with systems or the car. LIFEPO4 20ah. All on stock alt.
Hi i am calculating to replace my Civic Hybrid battery ni mh with 38120 heaway battery of 10Ah, voltage is close to the OM battery, the OM battery has a system of bms on each stic, should i try to use this system from the car that will check the voltage from 5 battery stik in series ? The total number of cels is 55 in series split in 11 stik with separated conection this should give me 199v and 10Ah with ~4 Ah more than the new OM one. What do you think will this work?
How do you prevent overcharge from one cell? As every connection to monitor the pack is non accessible. The balancer will do some work but with a 5A+ charge rate that puny balancer won't keep up. Definitely not with used cells. Why not use a BMS and a contactor, the way it's supposed to be done?
The balancer works continuously to average out voltage drift, so unless the cells are so mismatched that they have drastic drift on a single-cycle bases, there won’t be issues. & if they cells are that mismatched, it’s probably time to disassemble the pack and re-sort, removing the most degraded cells to be used together in another pack for better match. Yeah, it may require purchasing a few cells but if someone already has invested into this setup, the extra cost isn’t that significant overall.
Link to Glowe Voltage. Nice to see putting old beef behind you!
That's really cool.
Now we need you to design and sell buss bars for glowes batteries! Would be nice to see a set for 12 of glowes cells 😁
All batteries should be made in clear container.
A clear Tesla powereall would be cool
Nice me my self personality I always use clear tool box tops for all my battery packs it’s a good idea 👍🏻
Could use some foam or something to occupy the rest of the space inside the case. Especially in any application that will vibrate.
High dense rubber
Awesome what about the paper you used, fish paper of something? Got a link? Thanks!
Looks good 👍
Did you use the screws that came with the cells 6mx1.0x8mm
Very beautiful brother
Thank you very much for always the best informative videos
Best regards from Philippines 🇵🇭☕☕☕
I'm looking for some of those red transparent heat shrink tubes for the Headway 38120hp cells , can you get any or do you know where I can get them
What’s the status on the BMS board design for this bus bar?
can u put this on the engine bay? could this also be a starter batt?
I’m also curious what BMS would you suggest for this battery pack and bus bar?
I love this design. Do they make a smaller version of the case? I am thinking for a motorcycle application.
Unfortunately no. But I sell a battery the size of a motorcycle battery supports a 5k system. Perfect for baggers with systems or the car. LIFEPO4 20ah. All on stock alt.
Awesome!
That is a pretty battery
will this battery stand up to the Texas heat without catching fire ?
Can I put Kapton tape over the busbar parts that are exposed ?
yes
Thank you sir
How many AH does a normal agn battery have and is this 1000 amps @ 32*?
@titoham-DCXLs for sure
I built my first 64 ah lithium bank
Can i connect to the front lead battery without isolator?
Would this 65ah be good for a 12000 watt system all taramps??
I’d say this is good for 400A so 12x400= 4800w
Jehu...when You planning Your audio build man😂
Too busy playing with batteries
That’s for kids
New to this and have to ask, don't you need a BMS with these cells?
Not a must, it’s common for car audio setups to use balancers only.
Will these buss bars work for 10 AH headway lithium cells ?
if cells are same diameter they should
Hi i am calculating to replace my Civic Hybrid battery ni mh with 38120 heaway battery of 10Ah, voltage is close to the OM battery, the OM battery has a system of bms on each stic, should i try to use this system from the car that will check the voltage from 5 battery stik in series ?
The total number of cels is 55 in series split in 11 stik with separated conection this should give me 199v and 10Ah with ~4 Ah more than the new OM one. What do you think will this work?
Try it
Wonder if your LiFePo4 LEV-60 would fit?
only if you lay it on its side, which would still be fine imo
I would like to know if this battery will be sold by you?
I would buy it
No i sell the busbar only
Onde vende essas células?
Links
jag35.com
Not one of these videos say home to install cells to where they go and what's neg and positive
"Audio" battery??? For a boom box?
For big SPL systems.. It can do Boom too.. but I won't recommend it.
How do you prevent overcharge from one cell? As every connection to monitor the pack is non accessible. The balancer will do some work but with a 5A+ charge rate that puny balancer won't keep up. Definitely not with used cells. Why not use a BMS and a contactor, the way it's supposed to be done?
Do it however you want, but despite your opinion there a lot of people successfully using these cells this way for years now.
The balancer works continuously to average out voltage drift, so unless the cells are so mismatched that they have drastic drift on a single-cycle bases, there won’t be issues. & if they cells are that mismatched, it’s probably time to disassemble the pack and re-sort, removing the most degraded cells to be used together in another pack for better match.
Yeah, it may require purchasing a few cells but if someone already has invested into this setup, the extra cost isn’t that significant overall.
We are waiting Tesla model s battery pack