Це відео не доступне.
Перепрошуємо.

How To Clean Your Watercooling Loop

Поділитися
Вставка
  • Опубліковано 18 сер 2024

КОМЕНТАРІ • 18

  • @jp99575w
    @jp99575w 3 місяці тому

    Like the blue color, I know you used a mix but what would you suggest for a premixed that would last a long time without gumming up the loop? I am going with all Alphacool components. Love your videos, always very informative.

  • @Sloyment
    @Sloyment 2 роки тому +2

    Actually only PCs with an internal combustion engine need a water cooling loop.

    • @julesverneinoz
      @julesverneinoz 11 місяців тому

      I built one a decade ago and after I started using it, I realized I never needed one 🤦. If anything in winter the PC often had to be heated up before it will turn on.
      This guide was helpful in a way that my liquid cooling system is out of date. My pump system is inside the reservoir with no outlet. le sigh.

  • @elefterios78
    @elefterios78 2 роки тому

    Can I use deionised water to flush coolant? is that ok ? I can't find distilled water.Thank you

  • @guiltygearcore
    @guiltygearcore 2 роки тому

    Nice video sir. Im planning to make my system water cooled and im kinda new in this kind of set up. What are the sizes of the hose and water fittings that i need to buy. Im just water cooling the processor.

    • @guiltygearcore
      @guiltygearcore Рік тому

      @@pinkgrognak Thats what im thinking too. Thanks for the suggestion sir.

  • @dougheclipse1717
    @dougheclipse1717 Рік тому +1

    I think you could have unmounted that 120 res and left it all hooked up and got that card out

  • @InSaiyan-Shinobi
    @InSaiyan-Shinobi 2 роки тому

    I just flushed my pc for the first time
    And it looked clear before after my tubes went dark dark brown it scared them hell out of me and some fittings look like corrosion and my cpu block is black? Is it fixable and reusable still?

    • @CyberCPU
      @CyberCPU  2 роки тому

      If it's soft line just replace it. I would use primoflex LRT. I'm regards to your block I would disassemble it and clean it really good. A toothbrush and toothpaste works really well (not the one you use on your teeth). Then flush your rad. I did a video on how to do it.
      Sounds like you got some growth. Make sure you use fluid with a growth inhibitor. The parts should be reusable if you can clean them.

    • @InSaiyan-Shinobi
      @InSaiyan-Shinobi 2 роки тому

      @@CyberCPU will do everything you said and watch the other vid for sure I was no joke like dis I just ruin everything it’s weird though I only used distilled water?

    • @CyberCPU
      @CyberCPU  2 роки тому

      @@InSaiyan-Shinobi Even if you use distilled water you have to add a growth inhibitor. The Primoflex LRT hose comes with one that will work. It also comes with a great cleaner that you might think about using. Just make sure you follow the directions really well.

  • @Rattenomics
    @Rattenomics 2 роки тому

    Hello cyber. Idk if you can help me or not but I have been having an issue with my PC. When I start it it won't load through the bios like it goes to bios load screen starts the spinning wheel like it about to load window 10 but never does I have to restart my PC and then sometimes it will load. I have reflashed my bios, fresh installed windows ten, and checked all my drivers. Any help would be much appreciated! Also great videos!

    • @Rattenomics
      @Rattenomics 2 роки тому

      I have a Ryzen 5 3600, 2060, b350 mobo, 2 16gb ram sticks, and a 700w gold power supply.

    • @CyberCPU
      @CyberCPU  2 роки тому

      First think I would do is try to get it into safe mode. After three failed Boot attempts it should launch startup repair. Go into advanced options and then select advanced startup. Push #4 for safe mode.

    • @Rattenomics
      @Rattenomics 2 роки тому

      @@CyberCPU okay what would I be looking for in after achieving that?

    • @Rattenomics
      @Rattenomics 2 роки тому

      @@CyberCPU I tried to run "startup repair" it came back with a "could not repair"

    • @Rattenomics
      @Rattenomics 2 роки тому

      @@CyberCPU I ran command prompt and ran "sfc /scannow" and it came back with "Windows Resource Protection found corrupt files and successfully repaired them. Details are included in the CBS.Log %WinDir%\Logs\CBS\CBS.log - indicates that the tool detected problems and was able to fix them." So maybe that will fix it.