Dear Mr. Joe, we consider that this system will work perfectly in the USA, specially in the regions where the light cordon-made houses usually go with the wind during heavy storms
it is not shattering...it is permanent shutters you are using....this is not new to the industry...just new to your area....congratulations...it is a good method of building...
This depends on the wall thickness... The required U-value in Dubai is 0.57 for walls. This can be achieved having 200 mm wall thickness (150 mm wall LGS studs + 50 mm panels from each side)
MEP is preinstalled. Presently we execute thousands square meter of walls in Dubai where we use ECOCON Dry Mix for walls filling. Check our website if you want to get more details: @t
This is excellent. In my opinion this system will make a huge changes in current construction system. Am sure under this system we can build less expensive house with minimum period of time. Please let me know how can i get more information about this system?
To say that this is different system means to say nothing. Starting from the point that Pinnacle uses foam concrete for filling and dense concrete for shattering.
I am a contractor here in the Philippines and we've been using mg Patented technology since 2012 and it is being used by a lot of Developers and Contractors here in the Philippines.You can visit our website at cfmi.com.ph for you to have an idea of what we have.
Эта система работает! Все больше появляется объектов построенных по этой системе, еще больше заключенных контрактов и заинтересованных лиц. Будущее у ECOCON есть.
If you are using equal amount of clean drinking water, sand, and cement to make this board then how could it possibly become ecological. Can the owners of this video explain the science behind this technology?
This was invented by the magnificent Adamic-man, Germany 1967. ... Cush (Greek: Ethiopia), means sun-burnt Phoenicians described by the Greeks, as fair-haired, fair-skinned people Persia means Lord of the Aryans now renamed IRAN 12 Tribes (i)ssac's Sons / Saxons / Anglo-Saxons / Europe / Australia / New Zealand / North America / First World
Aggregate?? shredded waste plastic for the fill? that expanding fill would be expensive and probably a sulfur acid to product a co2 type gas (or even a sulfur dioxide mix), thus a CSA type adhesion.. thus the steel structural framing. Heat resistance is dependent on expansion, the quality control and even temperature.. Maybe good for hot climates, but to variable for temperate climates that experience 15*C temperature changes in less than 12 hours. CSA mortars are 5 -10 times as expensive as portland.. Didn't mean to insult with the plastic garbage aggregate.. just all this hokiest-pokest magic cement has the potential for very expensive machinery as was needed in that featured background building (skyscraper) that had to have ice in the concrete for the pumping to those ridiculous levels that only 'oil money' could afford.
There is no any organic contents. We use cement-sand mortar that was processed through the specially designated machinery (mechanical activation). We use aluminum powder as base for Cell Generating Formula. The chemical process looks like AAC block production. But it has certain differences that allow us to do this in-situ. Presently we execute thousands square meter of walls in Dubai where we use ECOCON Dry Mix for walls filling. Check our website if you want to get more details: www.ecocon.ae/solid-wall-system
what a nice video it is
have not seen never in my life
it is very effective and powerful
and useful for all
FANTASTIC! We need this in the USA.
Dear Mr. Joe, we consider that this system will work perfectly in the USA, specially in the regions where the light cordon-made houses usually go with the wind during heavy storms
@@ozaretskiy Are there any contractors in the US who use this system?
@@JMaxwell1000 There is no till now... It is necessary to obtain the whole technology and to set up ECOCON production plant
Question,,
Do surface cracks appear in the walls and slabs due to settlement and if so how are they fixed
That is awesome! This is an opportunity to build a comfortable house and affordable!
wonderful constructional system!
it is not shattering...it is permanent shutters you are using....this is not new to the industry...just new to your area....congratulations...it is a good method of building...
Dear Dave, we call this "lost shattering"... The idea is with the fact that shattering and filling is the same material..
do you have branches in the Philippines?
What kind of U value the wall and roof can achieve?
This depends on the wall thickness... The required U-value in Dubai is 0.57 for walls. This can be achieved having 200 mm wall thickness (150 mm wall LGS studs + 50 mm panels from each side)
I need this product
How can I order
Where / how does the electrical and plumbing works get installed
MEP is preinstalled. Presently we execute thousands square meter of walls in Dubai where we use ECOCON Dry Mix for walls filling. Check our website if you want to get more details: @t
This is excellent. In my opinion this system will make a huge changes in current construction system. Am sure under this system we can build less expensive house with minimum period of time. Please let me know how can i get more information about this system?
how much is a complete manufacturing plant ?
Dear Michael, send me your email address and I will send you complete information.
My Patent is the one being used by Pinnacle which they called Pinnacle concrete,I had a WIPO under my name.
To say that this is different system means to say nothing. Starting from the point that Pinnacle uses foam concrete for filling and dense concrete for shattering.
Truly wonderful
muito bom. é o futuro
I think that this system will be excellent for my house... How can I get more info in regards?
I am a contractor here in the Philippines and we've been using mg Patented technology since 2012 and it is being used by a lot of Developers and Contractors here in the Philippines.You can visit our website at cfmi.com.ph for you to have an idea of what we have.
It seems that your link does not work...
Jaime Mendoza hi
can you send more information to my email:alamal99@batelco.com.bh
thank you
Очень оригинальная и доступная для мелкого предпринимательства технология строительства.
Эта система работает! Все больше появляется объектов построенных по этой системе, еще больше заключенных контрактов и заинтересованных лиц. Будущее у ECOCON есть.
it is not actually new, I've been doing this since 2011 here in the Philippines and I have an international patent to prove it.
I will appreciate if you send me more information towards your business and your patent.
JAIME GOOD NIGHT WOULD LIKE TO KNOW MORE ABOUT YOUR PRODUCT I AM SÃO PAULO BRAZIL
If you are using equal amount of clean drinking water, sand, and cement to make this board then how could it possibly become ecological. Can the owners of this video explain the science behind this technology?
Please go to our website www.ecocon.ae in order to get all information about the technology
отличный способ строительства! недорого и главное быстро!
My dream to build house by this technology
hi,am still waiting for your reply Oleg.
Gone... Please check your email... BTW, what country are you from?
@@ozaretskiy is it suitable for more than 3 floors
If yes,does it require extra reinforcement
Please answer
This was invented by the magnificent Adamic-man, Germany 1967.
...
Cush (Greek: Ethiopia), means sun-burnt
Phoenicians described by the Greeks, as fair-haired, fair-skinned people
Persia means Lord of the Aryans now renamed IRAN
12 Tribes
(i)ssac's Sons / Saxons / Anglo-Saxons / Europe / Australia / New Zealand / North America / First World
The perfect solution!
Aggregate?? shredded waste plastic for the fill? that expanding fill would be expensive and probably a sulfur acid to product a co2 type gas (or even a sulfur dioxide mix), thus a CSA type adhesion.. thus the steel structural framing. Heat resistance is dependent on expansion, the quality control and even temperature.. Maybe good for hot climates, but to variable for temperate climates that experience 15*C temperature changes in less than 12 hours. CSA mortars are 5 -10 times as expensive as portland.. Didn't mean to insult with the plastic garbage aggregate.. just all this hokiest-pokest magic cement has the potential for very expensive machinery as was needed in that featured background building (skyscraper) that had to have ice in the concrete for the pumping to those ridiculous levels that only 'oil money' could afford.
There is no any organic contents. We use cement-sand mortar that was processed through the specially designated machinery (mechanical activation). We use aluminum powder as base for Cell Generating Formula. The chemical process looks like AAC block production. But it has certain differences that allow us to do this in-situ. Presently we execute thousands square meter of walls in Dubai where we use ECOCON Dry Mix for walls filling. Check our website if you want to get more details: www.ecocon.ae/solid-wall-system
If you can give me your email we can send to you some details
It is: oleg.z@ecocon.ae
copy,thanks
Jaime Mendoza
could you also send me some details.. pramod20riz@gmail.com
Jaime Mendoza
It's a stupid system and it add nothing to the construction industry
Can I ask you, have you tried this system or not? Share your practical experience please