BEKO Washing Machine Motor Brushes Replacement - Easy Step by Step Guide
Вставка
- Опубліковано 30 лис 2024
- This video shows the procedure I used to replace the carbon brushes on. Beko WM 6123W. The procedure may be similar on most Beko machines.
MAKE SURE THE POWER IS OFF AND UNPLUGGED BEFORE STARTING THIS REPAIR.
I hope this video is helpful to you. Please let me know in the comments. Consider subscribing and click the like button if you found the video useful.
------------------
🛠 PARTS USED IN THIS VIDEO 🛠
Please make sure you select the correct part for your make and model of machine.
New brushes from this link: ebay.us/Xg1ygd
This is an affiliate link, so I will receive a small commission at No extra cost to you.
------------------
Here are some other video you may enjoy:
Woodworking bench vice - Full Restoration: • Amazing - Vintage Reco...
Riley RMA 1947 Fails to start: • Classic Car Fails to S...
Old metal files - Full restoration: • Old Metal Files - Rest...
#BEKO #brushreplacement #DIY
Mate, can't thank you enough. Just finished replacing the brushes on my Beko after it started sparking. This is how youtube should be, no nonsense, just show how to do it and get on with it. You've saved me £100s, you are a true hero 👍🏻
Thank you very much, your praise is very much appreciated although I’m not sure I’m a hero 😁. I do try to explain exactly the process when I make a video making sure all the steps needed are there. It is annoying if a critical part is missed. Very pleased you got the job done and it saved you money. 👍🙂
Jaki rozmiar torx?
man, thank you so much. my beloved machine stopped spinning after just 2 years from new. i was heartbroken. but went snooping on the net and found out about the brushes. guys like you who upload how to vids save guys like me every day! i like to repair, rework, repurpose etc. and you saved me a bundle. thank you very much.
Thanks Jonnie, it’s great to hear my video was so helpful to you. 😊👍
This is a very well designed machine for maintenance. Not all are this well laid out. Tanks for the video!
Very pleased you liked it, yes they are not too bad to work on. Hope it helped with your repair. 🙂👍
Turned out exactly as you said 👍 🔧
Hi Mark, I’m very pleased it was helpful. 🙂👍
Just one correction - the cables are not hard to pull off at all, but you need to press on the little lever that unlocks the little hooking mechanism. PS: Great video, thanks for sharing!
You are I’m sure correct and it may help others carrying out this repair. I’m really pleased you liked the video. 👍🙂
Very good video. Thanks
Thank you, very please you liked and found it useful. 🙂👍
My machine fills and drains fine but doesn't spin. Do you think this is the problem before i go dismantling my washer 🤣 googled it and the motor brushes seem the most likely culprit
Hi joe, if the drum doesn’t spin at all the belt may be the issue. If you remove the top panel lid (should just be a couple of screw at the back) you can check the belt to see if it’s broken. Hope this helps. 🙂👍
I have the same issue . Did the brushes fix it
Hi, The motor on my model is sealed. No brushes evident..I take it this will be a complete replacement? Is there a continuity test I can do between connectors?
Hi Nick, sorry I haven’t replied to you before now. It sounds like yours is a newer model and has brushless motor. I am not an expert on these so can’t really help, if you haven’t already try searching on UA-cam for checking a washing machine brushless motor. Sorry I can’t be more helpful.
@@EverydayWorkshop
Jaki rozmiar torx?
So my beko model WMB71543W was working fine, now it doesn't fill with water properly and doesn't spin at all. It will still spray water into the drawer and it will still drain, just not filling properly or spinning. Do you think this is the same problem?
Hi Andrew, it may well be. If it’s fairly old machine and has done a lot of work it is very likely. Have you checked the drive belt, if it has broken the drum won’t spin, but you should hear the motor running. Hope this helps and you get it sorted. 🙂👍
Hi, I have a beko washing machine and it's stopped spinning. It fills and drains okay. Checked belt and that's okay, do you think the motor is caput or the bushes could need replacing?
@@tinklefluffypig Take the motor out and have a look at the brushes. I have just replaced mine and one brush was worn down that much it wasn't even touching the commutator. (The other brush was fine)
When the brushes go the machine will display error 18 as I found out
My beko wmb61222w only can see 2 bolts can't see any other bolts holding the motor in
Hello i have a question im trying to replace my brushes but the new ones i bought are still hiding in the metal casing how do i get them to spring up?
Hi, to honest I’m not sure why yours are stuck in the ones I used were not. I’m sure there must be a retaining pin or similar holding them in place. Sorry I can’t help more.
Just had a look at my video to remind myself, there is a small tab part way along the metal body. I think this is holding it, it will just need prising up to release the brush. Hope this helps. 🙂👍
@EverydayWorkshop ahh yes it finally springed up thank you mate
Very useful video for me, cheers
Hi, I’m very pleased you found it useful. Thanks for watching. 👍🙂
@@EverydayWorkshop very useful, for the sake of a tenner for new brushes, absolute win.