maraming matutunan dito sa video nyo ang mga technician katulad ko sir ngayon may nalalaman na naman ako tungkol sa paggawa ng patay sindi patay sindi na sakit ng LG tv keep sharing sir.
Sir ed maraming salamat halos pareho lang board power supply na ginagawa ko nagka idea ako sayosalamat sa pagtulong sa mga baguhan tech umaasa lang sa you tube san po ba kayo puede makuntak gud pm
I don't speak the language, but I think I understand. When I press the Power button on my LG 50LN5600 TV, the LG logo flashes on for just 1/2 second, then black. The red LED blinks 3 times. If the backlight is not turning on because of dead LED lights it's because the backlight power supply circuit detects this. By jumping (soldering) pin 13 to ground Ed is disabling the protection circuit. Pin 13 is "CP" according to the datasheet for BD9270. On my TV the protection IC is different (BD9483) and "CP" is pin 16. When I solder pin 16 to ground, there is no change in the symptom (LG displays for 1/2 second, red LED blinks 3 times). I hoped that by disabling the backlight protection, the backlight LEDs (the ones that are working) will turn on always. Why is this trick no working for me? The power supply board voltages are all present and correct at the output connector. Thank you.
Idol eh qng palitan q un led backlight..maayos din kaya un on off issue.....kasi remedio na ginawa q tinanggal q lng un sunog na led backlight tapos shinort q...
maraming matutunan dito sa video nyo ang mga technician katulad ko sir ngayon may nalalaman na naman ako tungkol sa paggawa ng patay sindi patay sindi na sakit ng LG tv keep sharing sir.
ANDALI LNG KAY SIR ED AH.. SALAMAT PO SA PAG SHARE NG KNOWLEDGE.. GODBLESS YOU MORE SIR.
Watching po tell end master idol sir ed salamat s pag share ng kaalaman
salmt master,, walng sawa pgshare ng kaalaman,, new bie... god bless po
salamat master,, walang sawa pgshare mg inyong kaalaman, god bless po
Good Job boss
Watching po master Ed,
Thank you Sir Ed sa lg 32 na nagpro-protect
always watching master ed,malaking tulong tlga sa amin ang mga kagaya mo na laging sinishare ang mga kaalaman,God bless master
Galing talaga ni master Ed salamat master dimo talaga pinagdadamot ang mga nalalaman mo God bless you master
Watching SIR ED, NICE VIDEO TUTORIALS, THANKS FOR SHARING, GOD BLESS SIR ED.
Nice job sir ed God bless
Good job sir ed
watching narin po master.thanks sa bago nanamang techneque.
watching master Sir Ed..
god bless sir. dagdag kaalaman na naman...
Husay.. protect malamang sa backlight..
Salamat Sir Ed.
Now watching master
Maraming salamat sir god bless always...
Idol lupit po always watching
Watching master Ed
Thnkz for sharing master ed
Nice tutorial siR .. thank you for sharing.. nice job 👍👍👍👍👍
Watching po master👍
Thanks boss napanood ko video mo ok na . Nagana na tv ko
Thanks sir....❤❤❤
Love you master....
Watching master
👍..
Malupit la talaga guru!🙂
thanks 👍👍👍
Nice tutorial master ed.Good job👍
Watching sir
Sir ed maraming salamat halos pareho lang board power supply na ginagawa ko nagka idea ako sayosalamat sa pagtulong sa mga baguhan tech umaasa lang sa you tube san po ba kayo puede makuntak gud pm
Sana sir mapa gana ko LG ginagawa ko sa vlog mo
I don't speak the language, but I think I understand.
When I press the Power button on my LG 50LN5600 TV, the LG logo flashes on for just 1/2 second, then black. The red LED blinks 3 times. If the backlight is not turning on because of dead LED lights it's because the backlight power supply circuit detects this. By jumping (soldering) pin 13 to ground Ed is disabling the protection circuit. Pin 13 is "CP" according to the datasheet for BD9270. On my TV the protection IC is different (BD9483) and "CP" is pin 16.
When I solder pin 16 to ground, there is no change in the symptom (LG displays for 1/2 second, red LED blinks 3 times). I hoped that by disabling the backlight protection, the backlight LEDs (the ones that are working) will turn on always. Why is this trick no working for me?
The power supply board voltages are all present and correct at the output connector.
Thank you.
watching,,,,
Now i know. Same brand, 32" din tv ko. On & off din problem. Dinala ko sa technician, di nya naayos.
Good job sir...👍
Transformer inverter backlight sunog wla Ng pamalit paano ayusin salamat po
Master ed saludo ko sayo
Newbie is watching master
God bless you master
Idol eh qng palitan q un led backlight..maayos din kaya un on off issue.....kasi remedio na ginawa q tinanggal q lng un sunog na led backlight tapos shinort q...
Panood po Master
Boss ung connection ng baklight okay lang ba mabaliktad ung connection ng wire
Magandang araw po master may mainboard kaba nian? Meron kc ako dito sira ang mainboard may sunog po ung ic nia
Boss Yung protect Naman sa Panasonic lct tv 32" anong pin?
Pa shout out master
10k(103) lang nilagay ko dyan.papatong ko lng sa smd cap nakapwesto dyan.
Gud pm sir my lg tv ako 65inc cra ata m. Board nagawa po ba kau ng m. Board or my avail n m. Board model. 65un8000ppa salamat po
Panood master
Panood
Kapareha lang sa sonny at sharp bai.. same lang sela...
Sir San loc mo
Saan po shop nyo sir
ano protect ng lg32lk310
Master Ed nice tutorial, God bless you.
...SAAN PO SIR ANG SHOP NU.?!
Paano kung sunog ang transformer ng inverter nyan wala mabilihan na transformer
Palit buon power supply
Transformer Mismo sira wla n mabilihan
Sir kung tanggalin boss yung proctection ic pwede ba. Kase mag convert na ng bl driver?
Mas matibay mo cffl tube sir pwd din sir
Noted po
Master sn po location nyo
Sir ed pano po kung dahan dahan namamatay tpos mabubuhay ung ilaw tpos mga 5 minutes bago mabuhay ung unit...
Check mo board kung malinis wala umido check suply kung normal lahat
same lg ko lods location u lods
Valenzuela city