You ran a stress test when the NZXT firmware was updating and the monitor program shows the fans weren't running. Your CPU was sitting at 84°. Why didn't you just let the firmware update and then run the test again showing the fan speeds?
Hey guys im currently trying to set this up with my NZXT h9 flow case on the top wanting it to push the air through the radiator up the top which way dos the air flow? is it the part where the NZXT is or the bottom part? very confused xD (First build)
You only need the cables that were attached if you use the included fans, right? If I need different fans, the cable management has to be different, right?
im getting a simlair nzxt cooler and I'm using lian li fans instead and I was wondering If I just plug the USB header that comes out of the breakout cable into the motherboard? since I'm not gonna be using the fan hub
Can you explain how you connected the Lian Li fans to the breakout cable and motherboard? I'm using Thermaltake fans and want to make sure I connect correctly. Thanks!
@@taz7173 I ended up connecting the fans that are on the aio the the cpu fan header on my motherboard and I ordered lian li’s extra cable kit which came with a cable that plugs into the fan hub controller for the rgb and I plugged the 3 pin connector that comes off the breakout cable to pump fan 1
I think the one connect to aio is optional, it depends on what fans you using… like Lian li sl infinity which is you can put it together to have one cable…
Installing the cooler was easy to do the cables are easy to coordinate when you watch this video but one part of this video powered it doesn’t show what cable you need to plug in into the usb splitter I looked In the instructions to get it
My current build I am working on is an anti-RGB build. The lack of twice the cables with no RGB is nice. The only RGB in my build is the MSI logo on my Mobo, which I'm hoping I can just turn off, lol.
🔶Help please! when I adjust the plastic backplate, and put the motherboard vertically (without kraken installed), not adjust at 100%. Dance like a 1 or 2 mm not adjusted. Backplate can move a little bit. Is it normal?? thanks for your replay
Okay thank u. I bought a case but the fans did not come with a light and I want something that matches the light with kraken 360 rgb. What recommendations in the fan
I mean, "yes" in that it can cool that CPU as well as the best coolers on the market that aren't a custom liquid solution with more radiators. Without tweaking the voltage down on the CPU, you will likely hit TJ max when running something like cinebench.
The only difference is a better LCD screen on the block. The Elite does not cool better than the standard. However, I have a feeling NZXT makes a lot of money off people assuming Elite = better performance.
@@NorthernChaos I am no expert in this domain, but if it isn't made of liquid metal then a little spill shouldn't damage anything, also these products are tested so if it was a problem then the company would have reduced the amount of paste :)
This video show simple and clearly. Thank. I got white color KRAKEN 360 rgb yesterday. But, the longest black screws only included 11 for 3 fans.
Do you have to install drivers or just the cam app
dmn that sucks man. i just installed mine but luckaly i had all 12 screws ;)
Thank you for details my friend 🇸🇦 ❤
Always welcome
You ran a stress test when the NZXT firmware was updating and the monitor program shows the fans weren't running. Your CPU was sitting at 84°. Why didn't you just let the firmware update and then run the test again showing the fan speeds?
is the processor is over clocked during testing?
I plugged mine into AIO pump on motherboard instead of CPU fan, was that wrong???
What if my motherboard doesn’t have those prongs do attach it to?
Installed the same one but i cant controll the speed of the fans 😐
My fans wont spin when i daisy chain the wired together. I put the wire on my Aio cooler pins on my mobo still nothing
AIO Pump plug to CPU Fan? Why?
Hey guys im currently trying to set this up with my NZXT h9 flow case on the top wanting it to push the air through the radiator up the top which way dos the air flow? is it the part where the NZXT is or the bottom part? very confused xD (First build)
Yeah front of fans pull air, unless you get a reverse fan thingy that some brands sell with their fans
اخ ليش الشاشه تكون مصغره بالمبرد ؟😢
You only need the cables that were attached if you use the included fans, right?
If I need different fans, the cable management has to be different, right?
@@toxiclolli4451 yes
Can I leave out the entire cable that was attached to the water cooling base if I use other fans?
@@toxiclolli4451 yes you can
im getting a simlair nzxt cooler and I'm using lian li fans instead and I was wondering If I just plug the USB header that comes out of the breakout cable into the motherboard? since I'm not gonna be using the fan hub
Can you explain how you connected the Lian Li fans to the breakout cable and motherboard? I'm using Thermaltake fans and want to make sure I connect correctly. Thanks!
@@taz7173 I ended up connecting the fans that are on the aio the the cpu fan header on my motherboard and I ordered lian li’s extra cable kit which came with a cable that plugs into the fan hub controller for the rgb and I plugged the 3 pin connector that comes off the breakout cable to pump fan 1
did you test it while it was in the case because your video is misleading?
If i change the fans on the kraken elite can I use my case fan rgb/fan hub instead of the nzxt one?
yes
Is it sufficient for intel i9 14900k plz answer me
ye ofc
so manny cables 😳
I think the one connect to aio is optional, it depends on what fans you using… like Lian li sl infinity which is you can put it together to have one cable…
Installing the cooler was easy to do the cables are easy to coordinate when you watch this video but one part of this video powered it doesn’t show what cable you need to plug in into the usb splitter I looked In the instructions to get it
My current build I am working on is an anti-RGB build. The lack of twice the cables with no RGB is nice. The only RGB in my build is the MSI logo on my Mobo, which I'm hoping I can just turn off, lol.
they discontinued the z73?
Yes
🔶Help please! when I adjust the plastic backplate, and put the motherboard vertically (without kraken installed), not adjust at 100%. Dance like a 1 or 2 mm not adjusted. Backplate can move a little bit. Is it normal?? thanks for your replay
I have the same issue, did you find a solution
Change the processor bracket, aliexpress or tema have a good choice
@@adbeelarmasgarcia1921 It was totaly normal, i install it with this "problem" and today it works perfectly
Can I put the cable on the Aio pump or in the Cpu_fan is right?
If you have aio pump ok otherwise cpufan
Wait can u add like a gif on the cpu cooler or no
yes
Hello u can change the color fan ?? Multicolor or is only white color ?
Hi you can change any color with it’s software NZXT CAM
Okay thank u. I bought a case but the fans did not come with a light and I want something that matches the light with kraken 360 rgb. What recommendations in the fan
Can I use it with a amd ryzen 7 7800x3d????
yess
How to replace liquides in this waterblock ?
You don't replace liquid in these AIO. They are made so it lasts at least 3 years
wheres the liquid?
in the radiator
enough this cpu coooler for 1390k ?
I mean, "yes" in that it can cool that CPU as well as the best coolers on the market that aren't a custom liquid solution with more radiators. Without tweaking the voltage down on the CPU, you will likely hit TJ max when running something like cinebench.
do you need thermal paste ?
@@mlvvnno it comes with it on it
@@skinb088 ok thanks
Hey can I pair this aio with i9 14900k is it good and sufficient for it@@skinb088
should i buy the original kraken or elite ?
Kraken bro they are fire
The legendary pro
original
The only difference is a better LCD screen on the block. The Elite does not cool better than the standard. However, I have a feeling NZXT makes a lot of money off people assuming Elite = better performance.
What is the difference kraken x73?
Thats the older version of this. We just have the Elite and Non-Elite now for LCD. That and the X73 is the infinity mirror version.
And whats the difference between the Elite and the regular?@@Farmsy__
@@maesl69 The hertz of the aio screen on regular is 30, for elite its 60.
Thanks!@@menboogabooga
Elite mutch bigger pump and screen
No thermal paste needed?
Think it’s already pre applied on the cooler. Plastic covering over the metal piece
It is pre applied
Thermal paste is pre-applied. Thats what that greyish circle was on the copper block.
@@vanda477yeaa
No one is going to tell that bro has forgotten to use thermal paste that 85 degrees is damn
Pump already had the thermal paste pre-applied, you can see the silver circle under it.
@@RTX7050 7:04 the pre-applied circle compound looks quite wide as compared to the CPU size. Is there a risk of it spreading when fixing the AOI?
@@NorthernChaos I am no expert in this domain, but if it isn't made of liquid metal then a little spill shouldn't damage anything, also these products are tested so if it was a problem then the company would have reduced the amount of paste :)
@@NorthernChaos Also it looks wider due to how close the pump is to camera.
please put the different music on videos man ı boring this ugly music
Because its free 😁 i will change