Pioneer Power Meter: Dual Leg SBT-PM91 Bluetooth/ANT+ Installation and Setup
Вставка
- Опубліковано 2 жов 2024
- Future cycling content is on my new channel: / @mamilian
The Pioneer SBT-PM91 Bluetooth/ANT+ dual power meter provides power and cadence data, like most bicycle power meters. But also offers the flexibility to use as a left or right side only solution. It also has some extra functionality around left/right efficiency and balance not available from other meters. Doesn't quite meet the claimed weight of 61g. 4g for magnets is excusable, I suppose. Maybe the 8g (69-61) difference is the CR2032 batteries?
Link: www.missingrem...
Music by: Orion C. Williams
Good job doing being a Mechanic, that bike is so nice deserves better pedals than Mountain bike SPDs c'mon man
LOL. I love the Xpedos! Lower total weight (shoes + pedals + cleats) than a road setup. And I can walk in the shoes :).
as for calibration.. should i start with the pioneers app and mags installed, and then come to calibrate it on the wahoo app? (does it matter if its on the app or on the bolt itself?)
If you're using Pedal Monitoring, I would recommend using the Pioneer app to do the initial calibration. After that, you can zero-offset ("calibrate") using the Wahoo, no need to use the app.
Does it work well is it consistent? Im gonna get the ultegra 6800 version of it
Yes. No issues so far.
Hola, tengo un powermeter pioneer y al apretar el botón para que cambia a Ant+, no reacciona, nunca cambia leds verde
Hola, tengo el mismo problema con el mio, usted ha encontrado una solucion ?
Gracias.
What app is used in the video?
It's the Pioneer Cyclo-Sphere app. Might have a different name now that Shimano bought Pio's PM business.
@@MissingRemote just found it. Thank you! Do I need the magnets to get power and cadence information on a Garmin 1030 plus?
@@elkellenhabla With a Garmin you want to run it in standard PM mode, which doesn't use the magnets. The magnets are used for the special Pioneer mode that only works with Wahoo or Pioneer head units.
Thanks for the video. To confirm, will the Pioneer power meter provide cadence information without the frame magnets or are frame magnets required? Thank you.
You don't need the magnets for cadence. They are only used if you enable the Pedal Monitoring mode (which I never use anymore).
@@MissingRemote Thank you!
@@darrenjeffries1500 No problem, enjoy the power meter.
Please could I buy the magnet template from you?
You don't need it. Install the cranks, line up the magnet with the pod where you want it to sit on the frame. Done. If you're not sure it will work, use some electrical tape to hold it there while you go for a short ride. Personally, I ended up ditching the pioneer magnets and using some rare earth disc magnets (you will need two per side). They work better and look better.
Missing Remote Thank you- would you be able to please scan in the template and email it to me, so that I can print it out?
@@harrykhalid9205 I'll have to look for it. Will LYK.
Missing Remote Have you found it?
@@harrykhalid9205 I'm actually on vacation ATM. It might be a while until I get a chance to find the box (it's probably in the attic, but...)
Hi there, quick question - so one of my mags were destroyed from a chain drop and I found that I rarely use the PMS anyway. If I was to take those mags off, what steps do I have to take to switch to just the Dual mode? Would I have to recalibrate and switch through the pioneer app? Also, would I have to re-pair the PM to my wahoo computer now that the mode has been switched? Thank you in advance.
No need to recalibrate. Just wake up the PM, then go to Mode Switch in the mobile app and change it to dual power. I don't think you'll need to re-pair with the Wahoo when changing modes.