Hello, I would like to buy one but I am afraid of the durability and solidity of the fixings. After a certain time of use, can you confirm to me that this luggage rack allows you to go off-road with luggage without worries?
Unfortunately, there is no video for this yet. But here you can find a instruction with pictures: www.ortlieb.com/media/downloads/anleitung/quick_rack_seat_stay_adapter.pdf
the "heat shrink" things go over the bendable metal parts so your frame doesn't get damaged it's the same principle with their fork bags if you don't have 3 mounting holes
could you please think about an option to install a rack on the thru-axles? Most bike manufacturers will void warranty if you mount something on the seatstays. I asked at canyon because i was looking for a mounting option for the new grail. they said nothing should be mounted on the seatstays on a carbon frame. I currently only know tailfin who offers something like this but their prices are insane!
@@ORTLIEBwaterproofoldmanmountain provides a thruaxle that would probablx work for the quickrack. Please design one yourself for a reasonable price. There is demand!
I got this great rack today! I admire the engineering of this product. It is realy great and my friends didnt believe how fast was the dis/mounting after inital setting. I am afraid though that metal washers would damage my carbon frame. I did not used them when i screw the carriers in. I rather get plastic putting pressure on my frame.
Hello, I would like to buy one but I am afraid of the durability and solidity of the fixings. After a certain time of use, can you confirm to me that this luggage rack allows you to go off-road with luggage without worries?
@@TheGogu77 man its realy realy tight. I do not go offroad often as i use it for commuting. But i am quality engineer and i believe this will endure pretty much anything.
Excellent rack. I bought the "light" version for my gravel . I use with Ortlieb Sport Roller Plus Panniers. Additionally, I bought and installed a B+M toplight 2C rear light and an Ortlieb Quick Rack Mudguard(50mm) . I also installed an additional SKS spoiler XXL (45mm) on the mudguard. It worked out without any problems. Now my back is reliably protected from splashes and dirt.
I also have the light version. Everything is good about it. I wish the mudguard was much longer. It's always easier to cut it short, but I can't extend it.
Will there be a screw in attachment for frames where you don’t want to connect to the seatpost but have rack mounts in the frame? Don’t want to attach to a carbon post but would love this for my titanium adventure bike. Would also suggest some titanium posts as an option to blend in rather than plastic…
Hello and thank you for the message. I don't know if I have understood you correctly. Unfortunately, there is no other way to attach the Quick-Rack to the seat post. However, I will pass this information directly on to our product management and perhaps there will be a solution for the future. Best Regards, your ORTLIEB-Team!
@@ORTLIEBwaterproof so most racks connect to screw in mounts at the top of the seat posts along with screw in points by the axle. I’d love to see an adaptor that connects to these upper screw holes rather than wrapping the seat post. Basically copy what you have on the bottom of the rack and put two more studs to attach at the top
Yes! I've been waiting so long for something like this to come out! Are both quick racks compatible with the Ortileb trunk bag with the rack lock adapter? Are they suitable for offroad touring?
Hello Joey, the Trunk Bag is compatible with the Quick Rack (www.ortlieb.com/en_us/quick-rack+F78104). Not with the Quick Rack Light, as it does not have a platform on top. The Quick Rack is for road, gravel or mountain bikes and also for commuter bikes. Best Regards, your ORTLIEB-Team!
Hello Joey, thank you for your feedback! 😊 You can only buy the extra mounting points through our customer service (customerservice@ortlieb.com.). From 2023 the part will also be available in our onlineshop. Best regards, your ORTLIEB-Team!
I had issues adding this rack on to my bike. While my bike does have m5 eyelets they situate the pegs at a slight angle so the racks clamp mechanism struggles to open and close easily. If you’re buying this rack make sure that’s not the case on your frame. The only way I could mount this rack was to clamp it onto the pegs first (off the bike) then screw the pegs with rack in after -which sort of defeats the purpose. Also the m5 bolts are slightly too short for my bike, and I will have to source new ones --it’s only being held in by a small amount of thread. The seat tube mount works great though! Just a shame about the quick release mechanism.
Hi, it's a shame that the Quick Rack doesn't fit 100% on your bike. But at least you were very creative and made it suitable for you. There are so many different bikes that it is unfortunately very difficult to develop products that fit every bike on the market. However, we always take feedback very seriously and are constantly working to improve ourselves and our products. Best regards, ORTLIEB-Team!
I really really need this!!! Will it never be available in the US? Or is there still a possibility? If it's not possible, I will just have my European friend help me order it ... Thanks Ortlieb
Hello and thank you for your message. So far, it is not possible to offer the Quick Rack on the US market due to legal reasons. However, we are working on it. How long it will take is uncertain. Thank you for your understanding. Best Regards, your ORTLIEB-Team!
@@jeromewintringer8133 The Quick-Rack XL is suitable for bikes with a maximum tyre size of max. 29 inch x 2.6 inch when mounted with a Thure Axle M6 connector and max. 29 inch x 3 inch when mounted directly on the frame. On the other hand, the normal Quick-Rack is suitable for smaller tyre sizes, the data sheet can be found here: www.ortlieb.com/media/downloads/datasheet/en/quick_rack.pdf . Best regards, your ORTLIEB-Team
I just got the Quick Rack Light and it works great. It came with the light mount but there’s no reflector. Was it missing or do I have to buy it separately? And if so, where do I get it? Cheers!
Hello, thanks for your great feedback! :) The light for the bracket is not included. This must be purchased separately. Best Regards, your ORTLIEB-Team!
Hallo, auch nach mehrmaligen Gebrauch ist er immer noch so stabil wie am Anfang. Der Quick-Rack hat eine Freigabe bis zu 20kg. Viele Grüße, dein ORTLIEB-Team!
Hi Peter, we advise against this, as damage can occur more quickly. You can try it but then unfortunately we cannot maintain the guarantee. Sorry for that! Best regards, your ORTLIEB-Team!
@@ORTLIEBwaterproof the fact sheet says it can be used with carbon frames with eyelits and carbon seatpost. what guarantee can you not maintain? asking cause i would like to use on my trek checkpoint sl5.
If the frame has eyelits for mounting racks, then sure, it will work like any other rack. As for clamping on the Seatpost: it is definitely okay as long as you can clamp it in the area of the post that is meant to go into the frame (its often marked). but even above that area it should also be fine as long as you dont clamp it extremely tight, its not needed anyway because there is basically no vertical force.
The Quick Rack itself is made of aluminum. The hooks at the bottom are plastic. Here is a link to the data sheet: www.ortlieb.com/media/downloads/datasheet/en/quick_rack.pdf. Best Regards, your ORTLIEB-Team!
Good morning Graham, thank you for your request. Unfortunately, we cannot recommend this, as the screws cannot be screwed in far enough and the hold may no longer be guaranteed. Kind regards. Your ORTLIEB-Team
Hello Frederik, Thank you for your kind message. The fork packs cannot be attached to the rack because they are specially designed for a fork mount. We can recommend our smallest possible panniers for the rear rack, the Gravel-Packs: www.ortlieb.com/en_us/gravel-pack+F9984# Best regards, Your ORTLIEB-Team
Dumb question time. Is it the rack top that is level or the pannier bay mounting bars as they are on different angles? I am assuming the pannier bar needs to be level although this video suggests it is the rack?
Hello Peter, the top of the carrier is horizontal. The strut, which is mounted on the seat post, is slanted or inclined depending on the frame. Perhaps our instructions will also help you to understand: www.ortlieb.com/media/downloads/anleitung/quick_rack.pdf I hope this helps you! Best regards, your ORTLIEB-Team
I have just found a proprietary video that shows the rack to on an angle and the bag mounting bar horizontal. I will do this as it makes sense. Suggest you revisit your installation video to make this more clear, many thanks for getting back to me so quickly
We are pleased that you have now understood how it works! Thank you for your kind feedback. We will be happy to pass it on to the relevant department and will try to make it easier to understand in future. Best regards, your ORTLIEB-Team @@peterlindsay8235
I am getting ready to buy a full set of Ortlieb bags, as well as a set of smaller bags for commuting and shopping. The Ortlieb site says the quickrack is made in Germany, but the Rack Three does not? I will be needing a front rack as well, I've seen Tubus recommended many times for use with your bags, are they made in Germany?
Hello, yes the Quick Rack is made in Germany and the Rack Three not. We recommend Tubus, because it is a German brand that builds high-quality carriers and is well compatible with our bags. Which model of Tubus is now "Made in Germany" you would have to ask Tubus directly. Thank you and best regards, your ORTLIEB-Team!
Hello@@woelno, I can not give you any information about this. Please contact our partner in the UK: LYON EQUIPMENT Ltd. T +44 (0) 15396 24040 E info@lyon.co.uk www.ortlieb.com/uk They can give you information about this. Best Regards, your ORTLIEB-Team!
Do you guys recommend putting it on a Cannondale Topstone Lefty 3? I would like to make a long trip to the USA and because of the Lefty fork, I need to put most of my stuff on the back panniers. I'm afraid because of the Kingpin system and carbon frame, that I will destroy something on the bike. I wrote to the Cannondale but 3 weeks passed and no reply yet. Appreciate your answer ✌
Does anyone have thoughts or comments on the following: 3rd party or aftermarket racks when used on full suspension bikes. (This is quite common on Fat Tire E-Bikes) but I've seen even acoustic bikes have rear suspension's on them and what I've heard and trying to get further feedback on is this: Rear Racks when used in combination with the rear suspension design can injury the rider or damage the bike, or both, (at this moment I can't unpack that statement anymore, I'm trying to discern how common this opinion is held )
Hello Alicia, you have to buy the QUICK RACK SEAT STAY ADAPTER separately. Here you can find it: www.ortlieb.com/en_us/quick-rack-seat-stay-adapter. Best Regards, your ORTLIEB-Team!
Hallo Ortlieb Team. Ich fahre ein Schindelhauer Rad aus Alu pur. Also ohne Lackierung oder Oberflächenbehandlung. Ist der Seat Stay Adapter auch für dieses Material zu empfehlen oder kann es auf Dauer zu Beschädigungen kommen?
Ich war lange auf der Suche nach einem Gepäckträger, der schnell zu demontieren ist und bin dann auf diesen gestoßen. Als er vor paar Tagen dann endlich lieferbar war und bei mir angekommen ist, legte ich mit der Montage los. Da ich kein Gewinde für die die Befestigen hatte musste ich mir mit dem Adapter set zur Befestigung behilflich sein. Dabei werden jeweils an den Streben 2 Metallplatten mit Gewinde mit eines Blech, welches um die Streb gelegt wird und dann durch Knicken befestigt. Das ganze ist sehr mühselig und hatte mir dann durch die entstehende scharfen Kanten gleich eine Wunde am Finger zugezogen. Die anschließende Befestigung des Gepäckträgers klappt dann leider nicht so schnell wie im Video und man benötigt sehr viel Kraft. Ich finde der Hersteller sollte es mehr in der Praxis testen und nochmals überarbeiten.
Hallo @@odin1798 , wenn du einen Rahmen aus Carbon hast, ist die Anbringung nur möglich, wenn Gewinde vorhanden sind. Die Adapterlösung ist leider nicht möglich. Viele Grüße, dein ORTLIEB-Team!
Hallo @Ja De, danke für dein Feedback. Wir geben das ganze gerne an unser Produktmanagment weiter. Der Quick Rack wird durch mehrmaliges benutzen leichtgängiger. Viele Grüße, dein ORTLIEB-Team!
@@ORTLIEBwaterproof I was looking for a solution for my carbon bike without M5 hole's...reading this it becomes clear I need to look for an other solution...It's a pity that I have to find out in this way. Ortlieb is not clear about this restriction.
Hello, the Quick Rack can also be used with aero tubes, as long as the tube is not too large. We give as a max. diameter 40mm. This changes of course with an oval aero tube. It is best to test this at your local dealer. Alternatively you can measure the circumference of the tube. This should be less than 120mm. Best Regards, your ORTLIEB-Team!
I am running 27.5 x 2.4 tires and my bike lacks m/5 or m/6 eyelets. Would be using seat stay adaptor to install. It appears that would raise the rack about an inch higher and slightly modify the angle. Is the tire width an issue under these circumstances.?
Hello David, this is a very special request, in this case I would ask you to contact our customer service. Our colleagues will certainly be able to offer you a suitable solution. You can send your request to the following e-mail address: customerservice@ortlieb.com Best regards, Ortlieb Team.
Dear Oliver, thank you very much for your request. The Seat Stay Adaper is not included in the delivery and must be purchased separately if it is required. Kind regards Your ORTLIEB-Team
Yes! That is a solution! It is important that the carrier has 20mm clearance to the tyre. If the Seat Stay adapters bring the carrier high enough above the tyre, it also works with larger tyres. If the M5/6 threads on the seat stay are also higher, it may be possible to use larger tyres directly without Seat Stay adapters.
Hello and thank you for your message. Unfortunately not directly in the Philippines. But you can contact our partner in MALAYSIA GLOBAL GARMENT TRADING CO T +60 (0) 12 3307033 E ggtsport@gmail.com or AUSTRALIA DIGGARI P/L T +61 (0) 3 90 9000 20 E info@diggari.com.au www.b2b.diggari.com.au Best Regards, your ORTLIEB-Team!
Hello and thank you for your request. Carbon frames must have an M5/M6 thread in the frame! Please clarify this with Cannondale! According to the product photo, it looks like there is an M5 thread. If you do need any further support, don`t hesitate to contact us again. Best regards from the ORTLIEB Customer Service
My road bike doesn't have rack mount points and I wouldn't want to mount on the seat stays (carbon fibre, not round section, not recommended) Is there an option to mount directly on the thru axle ends? Old Man Mountain supplies replacement thru axles that facilitate such mounting.
@@debren27 I have the Axiom Streamliner on my commuter! Super solid rack for bikes with disc brakes.. but it still depends on having rack mounts on the rear dropouts. And moreover the attraction of the rack in this video is that it's easily removed and remounted without tools. Sounds perfect for a bike that usually runs without a rack but can be attached in a jiffy when the need arises.
I just ordered my Steamliner Road so I'm no expert but their pages show it can be attached to a skewer instead of rack mounts. I toyed with getting one for my Specialized Tarmac but went with a large frame bag instead. I did just order one for my new Change 702 for different reasons -- its narrowness means it won't interfere with the folding. Agreed about the Ortlieb Quick Rack, tho! It looks great and I love the idea of a quick-release removeable rack. I'm actually tempted to try it on my folding bike since it certainly won't get in the way if it's not there most of the time! I just wonder if the bike would fold with the rack on. I couldn't find the deck width so it's hard to say.
Guten Morgen Henning, vielen Dank für deine Anfrage. Nein, der Adapter liegt der Lieferung nicht bei, da er nicht bei jedem Rahmen benötigt wird. Er ist jedoch separat erhältlich. Bei Rückfragen stehen wir dir gerne zur Verfügung. mit freundlichen Grüßen Dein ORLTLIEB-Team
Hello David, please feel free to contact our distributor. They can tell you exactly when the Quick Rack will be available in the UK. Here are the contact details: LYON EQUIPMENT Ltd. T +44 (0) 15396 24040 E info@lyon.co.uk www.lyon.co.uk Best Regards, your ORTLIEB-Team!
Hello, You can order the Quick Rack via our webshop: www.ortlieb.com/en_us/products or via one of our dealers. Please note that the Quick Rack is not sold in the US.
Hi, can the quick release on the seat post be attached to a Carbon Seat Post? Or does it have to be Aluminium? The bike frame is titanium with M5/ M6 eyelets. Thanks!
Hello and thank you for your message. Take a look at our fact sheet: www.ortlieb.com/media/downloads/datasheet/en/quick_rack.pdf. There you will find alle important details. Best Regards, your ORTLIEB-Team!
Here are the contact details of our distributor in Brazil: ZAKEN IMPORTAÇÃO e EXPORTAÇÃO Ltda. T +55 (0) 11 4243 7348 E info@zaken.com.br www.zaken.com.br And here you can find the Distrisbutor overview: www.ortlieb.com/en_us/ortlieb-international
Hello Frank, If you don't have a thread in the frame, you can use the Quick Rack Seat Stay Adapter.: www.ortlieb.com/en_us/quick-rack-seat-stay-adapter. Best Regards, your ORTLIEB-Team!😊
This is exactly what I need, but the seatpost mount and the seat stay adapters look made of plastic. Can these really withstand specified 15 kg load even in bumpy terrain? What tire size is used in this demonstration video?
Hello, the Quick Rack is now even approved for 20kg. In the video, the Focus Atlas with 28-inch is used. The tire is a Wtb Riddler 45C. Best Regards, your ORTLIEB-Team!
Hi, for bikes without M5 or M6 threaded eyelets, we have our Quick Rack Seat Stay Adapter which you find here: www.ortlieb.com/en_us/quick-rack-seat-stay-adapter Best regards, your ORTLIEB-Team!
The Quick Rack is suitable for 26” - 28” (limited suitability for 29” wheels - up to max. 2.35” tire width). Unfortunately, we do not have another rack of this type in our range.
Hello and thank you for your message. You would only need an M5 or M6 thread on your frame. Then you can also mount the Quick-Rack on a carbon frame. No axe is required. Here you will find the datasheet: www.ortlieb.com/media/downloads/datasheet/en/quick_rack.pdf for more information. Best Regards, your ORTLIEB-Team!
Hello@@vincentguerin6747, the Quick Rack (Light) was designed for mounting on the seat stay with M5/M6 or the adapter. The Quick Rack (Light) is only capable to fit tires up to 30/622 when mounted at a thru axle. Currently we can't give updates to development process, but we're working on a solution for these fitting problems. Best Regards, your ORTLIEB-Team!🙃
Does anyone know if this works with Serious Gravix One? A guy at my local bikestore told me that its really hard to find something that works with my bike.
Here you will find all the important information and points you need to check to see if the Quick Rack fits your bike: www.ortlieb.com/media/downloads/datasheet/en/quick_rack.pdf. If you still have questions, please contact our customer service directly. (customerservice@ortlieb.com).
Have a 700x38C whee.l Is ti possible to install it? What is the maximum distance between the truaxle and the quickrack to let the wheel turning without touching?
Hello Ludovic, here you can find the instructions: www.ortlieb.com/media/downloads/anleitung/quick_rack.pdf With a 700x38C wheel should fit the Quick Rack. Best Regards, your ORTLIEB-Team!
Hallo Markus, das Schutzblech zum Quick Rack ist separat erhältlich. Wenn du also schon ein Schutzblech hast, sollte der Quick Rack in den meisten Fällen trotzdem pasen. Hier noch ein Link zu unserem Datenblatt: www.ortlieb.com/media/downloads/datasheet/de/quick_rack.pdf. Dort findest du alle Daten auf die du achten solltest. Viele Grüße, dein ORTLIEB-Team!
Hi Bryan, your Bike needs a M5 or M6 thread on the frame. For bikes without M5 or M6 threaded eyelets, we have our Quick Rack Seat Stay Adapter (www.ortlieb.com/en_us/quick-rack-seat-stay-adapter). Take a look at the datasheet for more information: www.ortlieb.com/media/downloads/datasheet/en/quick_rack.pdf. Best regards, your ORTLIEB-Team! :)
@@ORTLIEBwaterproof These don't fit to Canyon roadlite 7 even though they have the M5 holes. There's no room for the quick release mechanisms, the seat stays are in the way. It can be installed with extra washers, but even then it cannot be installed horizontally.
The Quick Rack does not have a MIK system. But the Rack Three would have a MIK interface on the top of the platform. Just take a look at the Rack Three here: www.ortlieb.com/en_us/rack-three.
Hello, the Quick Rack has a release up to 20kg. Here you will find the data sheet, where you can find the most important information and whether it fits your bike: www.ortlieb.com/media/downloads/datasheet/en/quick_rack.pdf. Best Regards, your ORTLIEB-Team!
That should not be a problem. Here you will find the data sheet with all the important information: www.ortlieb.com/media/downloads/datasheet/en/quick_rack_light.pdf.
Quick mounting system looks great, but useless on gravel bikes with thru axle mounting (far more reliable than eyelets). Distance of Ortlieb mount to rack is only 36 cm (14.2"). On a 28"/29" wheel, there's less than 5 cm (2") space left for the tire height plus mud clearance. Unbelievable why Ortlieb Product Managers did not use a 38+ cm (15"+) distance like Trek, Cube, Tubus, and Old Man Mountain. Hope they fix this in a new version.
Hello, thank you for your feedback. The Quick Rack is not designed to be mounted at the thru axle of Gravel- or Moutainbikes. It was desigened to be as reliable and cost efficient as possible by using existing M5/M6 threads inside the frame (seat stays) or adapters as mounting points. But since the demand for other solutions are also very high, we are working on such updates. Kind regards, Your ORTLIEB-Team
Hello Eddy, we do not have a distributor in Indonesia. You can contact our distributor in Thailand: K-TRADE INTERNATIONAL CO., Ltd. T +66 (0) 2711 4700 E info@k-trade-international.com www.urban-aktive.com You should be able to get the Quick Rack there. Best Regards, your ORTLIEB-Team!
I bought it a week ago and use it on my cyclo-cross bike. Very happy with the quick rack so far. Great product!
in theory, if you install the mounting bits on other bike, can you use the same rack on those as well?
Hello Johnny, yes exactly. You can buy them separately again. 😊 Best Regards, your ORTLIEB-Team!
@@ORTLIEBwaterproof nice
Hello, I would like to buy one but I am afraid of the durability and solidity of the fixings. After a certain time of use, can you confirm to me that this luggage rack allows you to go off-road with luggage without worries?
Thanks for the excellent installation video tutorial.
Hey ORTLIEB, I like it much - when can we expect a version for fully MTBs - thanks, Andreas
Would have been good to have a video about fitting the quick rack seat stay adapter... dunno what all these heat shrink things etc in the packet are
Unfortunately, there is no video for this yet. But here you can find a instruction with pictures: www.ortlieb.com/media/downloads/anleitung/quick_rack_seat_stay_adapter.pdf
I can't get the screws to bike on the adapter ... A video would be really nice because the instructions are a bit hard to follow tbh
the "heat shrink" things go over the bendable metal parts so your frame doesn't get damaged
it's the same principle with their fork bags if you don't have 3 mounting holes
could you please think about an option to install a rack on the thru-axles? Most bike manufacturers will void warranty if you mount something on the seatstays. I asked at canyon because i was looking for a mounting option for the new grail. they said nothing should be mounted on the seatstays on a carbon frame. I currently only know tailfin who offers something like this but their prices are insane!
Hello,
Thank you for your kind message.
I will be happy to pass on your suggestion internally.
Best regards, Your ORTLIEB-Team
@@ORTLIEBwaterproofoldmanmountain provides a thruaxle that would probablx work for the quickrack. Please design one yourself for a reasonable price. There is demand!
I got this great rack today! I admire the engineering of this product. It is realy great and my friends didnt believe how fast was the dis/mounting after inital setting. I am afraid though that metal washers would damage my carbon frame. I did not used them when i screw the carriers in. I rather get plastic putting pressure on my frame.
Hello, I would like to buy one but I am afraid of the durability and solidity of the fixings. After a certain time of use, can you confirm to me that this luggage rack allows you to go off-road with luggage without worries?
@@TheGogu77 man its realy realy tight. I do not go offroad often as i use it for commuting. But i am quality engineer and i believe this will endure pretty much anything.
Excellent rack. I bought the "light" version for my gravel . I use with Ortlieb Sport Roller Plus Panniers. Additionally, I bought and installed a B+M toplight 2C rear light and an Ortlieb Quick Rack Mudguard(50mm) . I also installed an additional SKS spoiler XXL (45mm) on the mudguard. It worked out without any problems. Now my back is reliably protected from splashes and dirt.
Hello and thank you for your great feedback. We are pleased to hear that. Have fun with our Quick Rack Light! Best Regards, your ORTLIEB-Team!😊
This is the perfect rack.... Im so glad I found it
We need such an easely Rack for the front!
Hey! Have you considered Jack The Bike Rack? It's a great front rack that comes on and off easily.
I also have the light version. Everything is good about it. I wish the mudguard was much longer. It's always easier to cut it short, but I can't extend it.
I'll pass on your suggestion to product management. 😊
Yes please, @@ORTLIEBwaterproofI have the mudguard, it's too short
Will there be a screw in attachment for frames where you don’t want to connect to the seatpost but have rack mounts in the frame? Don’t want to attach to a carbon post but would love this for my titanium adventure bike. Would also suggest some titanium posts as an option to blend in rather than plastic…
Hello and thank you for the message. I don't know if I have understood you correctly. Unfortunately, there is no other way to attach the Quick-Rack to the seat post. However, I will pass this information directly on to our product management and perhaps there will be a solution for the future. Best Regards, your ORTLIEB-Team!
@@ORTLIEBwaterproof so most racks connect to screw in mounts at the top of the seat posts along with screw in points by the axle. I’d love to see an adaptor that connects to these upper screw holes rather than wrapping the seat post. Basically copy what you have on the bottom of the rack and put two more studs to attach at the top
Hey @@tkerby I'll pass on your idea. :) Thank you.Best Regards, your ORTLIEB-Team!
One more vote for a quick release Adapter which uses the standard rack mounts!
This looks great! I would love a pannier for my commute but would want to remove it for my gravel leisure rides.
Then the Quick Rack is perfect for you!
@@ORTLIEBwaterproof Any idea when it will be available in the UK?
The Quick Rack should be also available in the UK at the end of April. Best Regards, your ORTLIEB-Team!
Very smart idea
This would be perfect for my gravel bike, commute with bags in the week the remove for the weekend ride. When will it be available in the US.
Hello Eric, due to legal reasons we are not able to offer it on the US market yet. Best Regards, your ORTLIEB-Team!
Yes! I've been waiting so long for something like this to come out! Are both quick racks compatible with the Ortileb trunk bag with the rack lock adapter? Are they suitable for offroad touring?
Hello Joey, the Trunk Bag is compatible with the Quick Rack (www.ortlieb.com/en_us/quick-rack+F78104). Not with the Quick Rack Light, as it does not have a platform on top. The Quick Rack is for road, gravel or mountain bikes and also for commuter bikes. Best Regards, your ORTLIEB-Team!
Thanks! Can you confirm that extra mounting points will be available to allow the rack to be transferred between two bikes?
Hello @@blahblah24304! Yes, these will be available to buy separately. Best Regards, your ORTLIEB-Team!
I purchased at fitted the rack and it's really nice! Where can I buy the extra mounting points? Thanks!
Hello Joey, thank you for your feedback! 😊 You can only buy the extra mounting points through our customer service (customerservice@ortlieb.com.). From 2023 the part will also be available in our onlineshop. Best regards, your ORTLIEB-Team!
I had issues adding this rack on to my bike. While my bike does have m5 eyelets they situate the pegs at a slight angle so the racks clamp mechanism struggles to open and close easily. If you’re buying this rack make sure that’s not the case on your frame. The only way I could mount this rack was to clamp it onto the pegs first (off the bike) then screw the pegs with rack in after -which sort of defeats the purpose. Also the m5 bolts are slightly too short for my bike, and I will have to source new ones --it’s only being held in by a small amount of thread. The seat tube mount works great though! Just a shame about the quick release mechanism.
Hi, it's a shame that the Quick Rack doesn't fit 100% on your bike. But at least you were very creative and made it suitable for you. There are so many different bikes that it is unfortunately very difficult to develop products that fit every bike on the market. However, we always take feedback very seriously and are constantly working to improve ourselves and our products. Best regards, ORTLIEB-Team!
I really really need this!!! Will it never be available in the US? Or is there still a possibility?
If it's not possible, I will just have my European friend help me order it ...
Thanks Ortlieb
Hello and thank you for your message. So far, it is not possible to offer the Quick Rack on the US market due to legal reasons. However, we are working on it. How long it will take is uncertain. Thank you for your understanding.
Best Regards, your ORTLIEB-Team!
When will the Quick Rack XL be available? Thank you
Hello,
Thank you for your message.
The Quick-Rack XL will be available for purchase from January 2025.
Best regards, your ORTLIEB Team
@@ORTLIEBwaterproofwhat will be the difference compared to the normal model?
@@jeromewintringer8133 The Quick-Rack XL is suitable for bikes with a maximum tyre size of max. 29 inch x 2.6 inch when mounted with a Thure Axle M6 connector and max. 29 inch x 3 inch when mounted directly on the frame. On the other hand, the normal Quick-Rack is suitable for smaller tyre sizes, the data sheet can be found here: www.ortlieb.com/media/downloads/datasheet/en/quick_rack.pdf .
Best regards, your ORTLIEB-Team
Excelente. Muy buena solucion para poder poner y quitar el portaequipajes !!!
I just got the Quick Rack Light and it works great. It came with the light mount but there’s no reflector. Was it missing or do I have to buy it separately? And if so, where do I get it? Cheers!
Hello, thanks for your great feedback! :) The light for the bracket is not included. This must be purchased separately. Best Regards, your ORTLIEB-Team!
This is just what I need for commuting. But, is that rust on the bicycle chain?!?!
Oh yes, unfortunately you are right...😅
Super Idee! Wie siehts mit der Stabilität aus? Ist das Ding auch langfristig sicher, wenn ich da regelmäßig zwei gesund gepackte Packtaschen einhänge?
Hallo, auch nach mehrmaligen Gebrauch ist er immer noch so stabil wie am Anfang. Der Quick-Rack hat eine Freigabe bis zu 20kg. Viele Grüße, dein ORTLIEB-Team!
This would be perfect for me! Is it ok to be used with a carbon frame and carbon seatpost though?
Hi Peter, we advise against this, as damage can occur more quickly. You can try it but then unfortunately we cannot maintain the guarantee. Sorry for that! Best regards, your ORTLIEB-Team!
@@ORTLIEBwaterproof the fact sheet says it can be used with carbon frames with eyelits and carbon seatpost. what guarantee can you not maintain? asking cause i would like to use on my trek checkpoint sl5.
did you end up trying on your carbon bike?
If the frame has eyelits for mounting racks, then sure, it will work like any other rack. As for clamping on the Seatpost: it is definitely okay as long as you can clamp it in the area of the post that is meant to go into the frame (its often marked). but even above that area it should also be fine as long as you dont clamp it extremely tight, its not needed anyway because there is basically no vertical force.
Are the lower mounting hook locks made out of plastic or metal?
The Quick Rack itself is made of aluminum. The hooks at the bottom are plastic. Here is a link to the data sheet: www.ortlieb.com/media/downloads/datasheet/en/quick_rack.pdf. Best Regards, your ORTLIEB-Team!
Can conventional mudguards still be attached to the same frame fitting as the quick rack attachments ?
Good morning Graham,
thank you for your request.
Unfortunately, we cannot recommend this, as the screws cannot be screwed in far enough and the hold may no longer be guaranteed.
Kind regards.
Your ORTLIEB-Team
Are you working to push this into the US? Thanks 😊
Hello, for legal reasons, the Quick Rack is not yet available for purchase in the USA. Best Regards, your ORTLIEB-Team!
@@ORTLIEBwaterproof Does this have to do with import regulations or are there laws in the U.S. that regulate how rear racks are attached?
Are these compatible with disc breaks? Thank you.
That shouldn't be a problem. Click here for the data sheet: www.ortlieb.com/media/downloads/datasheet/en/quick_rack.pdf
Hello,
Is it possible to mount the fork packs to the rack? I would like to have less weight on the front wheel.
Thanks in advance for the answer.
Hello Frederik,
Thank you for your kind message.
The fork packs cannot be attached to the rack because they are specially designed for a fork mount. We can recommend our smallest possible panniers for the rear rack, the Gravel-Packs: www.ortlieb.com/en_us/gravel-pack+F9984#
Best regards, Your ORTLIEB-Team
@@ORTLIEBwaterproof thanks. Great costumer service.
Dumb question time. Is it the rack top that is level or the pannier bay mounting bars as they are on different angles? I am assuming the pannier bar needs to be level although this video suggests it is the rack?
Hello Peter, the top of the carrier is horizontal. The strut, which is mounted on the seat post, is slanted or inclined depending on the frame. Perhaps our instructions will also help you to understand: www.ortlieb.com/media/downloads/anleitung/quick_rack.pdf
I hope this helps you! Best regards, your ORTLIEB-Team
@@ORTLIEBwaterproof thanks; I get that however if the rack top in horizontal the pannier mounting bar is not as they are on different plans?
I have just found a proprietary video that shows the rack to on an angle and the bag mounting bar horizontal. I will do this as it makes sense. Suggest you revisit your installation video to make this more clear, many thanks for getting back to me so quickly
We are pleased that you have now understood how it works! Thank you for your kind feedback. We will be happy to pass it on to the relevant department and will try to make it easier to understand in future.
Best regards, your ORTLIEB-Team
@@peterlindsay8235
I am getting ready to buy a full set of Ortlieb bags, as well as a set of smaller bags for commuting and shopping. The Ortlieb site says the quickrack is made in Germany, but the Rack Three does not? I will be needing a front rack as well, I've seen Tubus recommended many times for use with your bags, are they made in Germany?
Hello, yes the Quick Rack is made in Germany and the Rack Three not.
We recommend Tubus, because it is a German brand that builds high-quality carriers and is well compatible with our bags.
Which model of Tubus is now "Made in Germany" you would have to ask Tubus directly. Thank you and best regards, your ORTLIEB-Team!
@@ORTLIEBwaterproof Perfect, thank you for the info, and love the products!
Great design. I think there should be a second layer of safety for the quick release fastener.
Hello and thank you for your feedback! The Quick-Rack is approved for up to 20 kg. Best Regards, your ORTLIEB-Team! 😊
hi, it's out of stock at the mopment,
any chance of re stocking it in the UK soon?
Hello, the Quick Rack Light is currently in stock. Take a look here: www.ortlieb.com/uk_en/quick-rack-light+F7810. Best Regards, your ORTLIEB-Team!
@@ORTLIEBwaterproof thanks but I prefer the other version. is there any lead time on when would it be in stock again for UK?
Hello@@woelno, I can not give you any information about this. Please contact our partner in the UK: LYON EQUIPMENT Ltd.
T +44 (0) 15396 24040
E info@lyon.co.uk
www.ortlieb.com/uk They can give you information about this. Best Regards, your ORTLIEB-Team!
Do you guys recommend putting it on a Cannondale Topstone Lefty 3? I would like to make a long trip to the USA and because of the Lefty fork, I need to put most of my stuff on the back panniers. I'm afraid because of the Kingpin system and carbon frame, that I will destroy something on the bike. I wrote to the Cannondale but 3 weeks passed and no reply yet.
Appreciate your answer ✌
Hi Attila, please contact our customer service via customerservice@ortlieb.com. The colleagues there will help you asap. Your ORTLIEB-Team!
Can I mount this on a Trek Xcaliber 9 with drop post and 29x2,35"" tires? It looks like that, but I want to be sure before I order.
Hi Fredrik, please contact our customer service via customerservice@ortlieb.com. The colleagues there will help you asap. Your ORTLIEB-Team!
What was your findings here? Have the same bike - 29” tyres and eyelets.
@@ptgnt It's pretty hard to find the quick rack in Sweden so I didn't get one. However, everything was pointing to that it would work.
Nice! Is it compatible with the gravel pack?
yess🔥
Is it available in the USA yet? Thanks
Hello, we are really sorry, but so far not yet. Best Regards, your ORTLIEB-Team!
Does anyone have thoughts or comments on the following: 3rd party or aftermarket racks when used on full suspension bikes. (This is quite common on Fat Tire E-Bikes) but I've seen
even acoustic bikes have rear suspension's on them and what I've heard and trying to get further feedback on is this: Rear Racks when used in combination with the rear suspension design
can injury the rider or damage the bike, or both, (at this moment I can't unpack that statement anymore, I'm trying to discern how common this opinion is held )
What are the six little black screw thingies for? They seem not nessecary but I’m might missing something..
Hello Maike,
the six screw ends are for bags with a QL3.1 mounting system.
They can be attached or removed as required.
Kind regards
Your ORTLIEB-Team
Thanks 😊😊
is the adapter (for bikes that do no have the m5/m6 mounting) INCLUDED in the quick rack box OR do I have to buy it on top of the rack?
Hello Alicia, you have to buy the QUICK RACK SEAT STAY ADAPTER separately. Here you can find it: www.ortlieb.com/en_us/quick-rack-seat-stay-adapter.
Best Regards, your ORTLIEB-Team!
This rack is a great size but I'm concerned about security. Is there a way to permanently fix the rack to the bike to prevent theft?
Unfortunately, there is no way to fix the rack permanently. However, the thief must first know how the rack works. 🙃
Hallo Ortlieb Team. Ich fahre ein Schindelhauer Rad aus Alu pur. Also ohne Lackierung oder Oberflächenbehandlung. Ist der Seat Stay Adapter auch für dieses Material zu empfehlen oder kann es auf Dauer zu Beschädigungen kommen?
Hallo Norbert, ich habe Rücksprache mit unserem Produktmanagement gehalten - das ist kein Problem. Viele Grüße, dein ORTLIEB-Team!
i ride a Canyon LUX worlcup carbon mountainbike. Is it a good idea to use the seat stay adaptors to the carbon seatstays?
Hello Sven,
thank you for your request.
Our Seat Stay Adapter is not suitable for carbon frames.
Kind regards
Your ORTLIEB-Team
Ich war lange auf der Suche nach einem Gepäckträger, der schnell zu demontieren ist und bin dann auf diesen gestoßen. Als er vor paar Tagen dann endlich lieferbar war und bei mir angekommen ist, legte ich mit der Montage los. Da ich kein Gewinde für die die Befestigen hatte musste ich mir mit dem Adapter set zur Befestigung behilflich sein. Dabei werden jeweils an den Streben 2 Metallplatten mit Gewinde mit eines Blech, welches um die Streb gelegt wird und dann durch Knicken befestigt. Das ganze ist sehr mühselig und hatte mir dann durch die entstehende scharfen Kanten gleich eine Wunde am Finger zugezogen. Die anschließende Befestigung des Gepäckträgers klappt dann leider nicht so schnell wie im Video und man benötigt sehr viel Kraft. Ich finde der Hersteller sollte es mehr in der Praxis testen und nochmals überarbeiten.
Danke für das Feedback, ich habe den Gepäckträger auch gerade entdeckt, aber bin skeptisch habe nämlich einen Carbon Rahmen.
Hallo @@odin1798 , wenn du einen Rahmen aus Carbon hast, ist die Anbringung nur möglich, wenn Gewinde vorhanden sind. Die Adapterlösung ist leider nicht möglich. Viele Grüße, dein ORTLIEB-Team!
Hallo @Ja De, danke für dein Feedback. Wir geben das ganze gerne an unser Produktmanagment weiter. Der Quick Rack wird durch mehrmaliges benutzen leichtgängiger. Viele Grüße, dein ORTLIEB-Team!
@@ORTLIEBwaterproof alles klar, danke für die schnelle Antwort. Dann muss ich mir wohl mit einer großen Satteltasche behilflich werden
@@ORTLIEBwaterproof I was looking for a solution for my carbon bike without M5 hole's...reading this it becomes clear I need to look for an other solution...It's a pity that I have to find out in this way. Ortlieb is not clear about this restriction.
Is the frame attachment suitable for an aero frame or seatpost and not just normal round ones?
Hello, the Quick Rack can also be used with aero tubes, as long as the tube is not too large. We give as a max. diameter 40mm. This changes of course with an oval aero tube. It is best to test this at your local dealer. Alternatively you can measure the circumference of the tube. This should be less than 120mm. Best Regards, your ORTLIEB-Team!
Chainstay mount adapters.. Is this advisable on a CF gravelbike seatstays?
Hello @TheJoeOption, the attachment of the adapter, is not possible with carbon. Otherwise always. Best Regards, your ORTLIEB-Team.
I can't do this. It's not offered to the US market.
Hello Enrique, due to legal reasons we are not able to offer it on the US market yet. Best Regards, your ORTLIEB-Team!
I am running 27.5 x 2.4 tires and my bike lacks m/5 or m/6 eyelets. Would be using seat stay adaptor to install. It appears that would raise the rack about an inch higher and slightly modify the angle. Is the tire width an issue under these circumstances.?
Hello David,
this is a very special request, in this case I would ask you to contact our customer service.
Our colleagues will certainly be able to offer you a suitable solution.
You can send your request to the following e-mail address: customerservice@ortlieb.com
Best regards, Ortlieb Team.
Does it come with the seat state adapter or do I buy separately?
Dear Oliver,
thank you very much for your request.
The Seat Stay Adaper is not included in the delivery and must be purchased separately if it is required.
Kind regards
Your ORTLIEB-Team
Can it also be fixed to a canyon carbon gravel ?
Hello,
only if the carbon frame already has M5 or M6 threads.
Otherwise unfortunately not.
kind regards
your ORTLIEB-Team
Could the adapters overcome the sizing constraints (29ers with 2.35 tires) since they could be installed slightly higher?
Yes! That is a solution!
It is important that the carrier has 20mm clearance to the tyre. If the Seat Stay adapters bring the carrier high enough above the tyre, it also works with larger tyres. If the M5/6 threads on the seat stay are also higher, it may be possible to use larger tyres directly without Seat Stay adapters.
@@ORTLIEBwaterproof Would this be stable enough to be used on a full suspension bike on rough terrain?
@@dgfreshx Yes! It is approved for a payload of up to 20 kilograms.😊
Hello, do you have a distributor in the Philippines? thanks
Hello and thank you for your message. Unfortunately not directly in the Philippines. But you can contact our partner in MALAYSIA
GLOBAL GARMENT TRADING CO
T +60 (0) 12 3307033
E ggtsport@gmail.com or AUSTRALIA
DIGGARI P/L
T +61 (0) 3 90 9000 20
E info@diggari.com.au
www.b2b.diggari.com.au Best Regards, your ORTLIEB-Team!
Is this rack suitable for the Cannondale Topstone Carbon?
Hello and thank you for your request. Carbon frames must have an M5/M6 thread in the frame!
Please clarify this with Cannondale!
According to the product photo, it looks like there is an M5 thread.
If you do need any further support, don`t hesitate to contact us again. Best regards from the ORTLIEB Customer Service
My road bike doesn't have rack mount points and I wouldn't want to mount on the seat stays (carbon fibre, not round section, not recommended)
Is there an option to mount directly on the thru axle ends? Old Man Mountain supplies replacement thru axles that facilitate such mounting.
Have a look at Tailfin, they have what you need. That's where Ortlieb copied the design from.
@@ickeausberlin36 thanks, yeah I know about tailfin. But I'd like to see Ortlieb come up with a comprehensive solution :)
Or Axiom Streamliner
@@debren27 I have the Axiom Streamliner on my commuter! Super solid rack for bikes with disc brakes.. but it still depends on having rack mounts on the rear dropouts. And moreover the attraction of the rack in this video is that it's easily removed and remounted without tools. Sounds perfect for a bike that usually runs without a rack but can be attached in a jiffy when the need arises.
I just ordered my Steamliner Road so I'm no expert but their pages show it can be attached to a skewer instead of rack mounts. I toyed with getting one for my Specialized Tarmac but went with a large frame bag instead. I did just order one for my new Change 702 for different reasons -- its narrowness means it won't interfere with the folding.
Agreed about the Ortlieb Quick Rack, tho! It looks great and I love the idea of a quick-release removeable rack. I'm actually tempted to try it on my folding bike since it certainly won't get in the way if it's not there most of the time! I just wonder if the bike would fold with the rack on. I couldn't find the deck width so it's hard to say.
Hallo wir benötigen die Adapter F78106, liegen diese nicht der Lieferung bei? Wie sollen wir jetzt den Träger montieren??
Guten Morgen Henning,
vielen Dank für deine Anfrage.
Nein, der Adapter liegt der Lieferung nicht bei, da er nicht bei jedem Rahmen benötigt wird.
Er ist jedoch separat erhältlich.
Bei Rückfragen stehen wir dir gerne zur Verfügung.
mit freundlichen Grüßen
Dein ORLTLIEB-Team
Can y say when I can buy a quick rack in the UK?
Hello David, please feel free to contact our distributor. They can tell you exactly when the Quick Rack will be available in the UK. Here are the contact details: LYON EQUIPMENT Ltd.
T +44 (0) 15396 24040
E info@lyon.co.uk
www.lyon.co.uk Best Regards, your ORTLIEB-Team!
Is the payload of 20kg per side or in total for the entire rack?
The Quick-Rack is released for 20kg in total. Best Regards, your ORTLIEB-Team!
How to order? Thanks
Hello,
You can order the Quick Rack via our webshop: www.ortlieb.com/en_us/products or via one of our dealers. Please note that the Quick Rack is not sold in the US.
Hi, can the quick release on the seat post be attached to a Carbon Seat Post? Or does it have to be Aluminium? The bike frame is titanium with M5/ M6 eyelets. Thanks!
Hello and thank you for your message. Take a look at our fact sheet: www.ortlieb.com/media/downloads/datasheet/en/quick_rack.pdf. There you will find alle important details. Best Regards, your ORTLIEB-Team!
the fact sheet says it can be used on carbon seat post and carbon frame. did you try it out??
Hello @@iani4860 , yes! The Quick Rack can be used on carbon seatposts and carbon frames with M5 or M6 rack eyelets. Best Regrads, your ORTLIEB-Team!😀
If you are concerned about the carbon seatpost, protect the contact points with helicopter tape.
Olá, onde comprar no meus pais Brasil. Grato.
Here are the contact details of our distributor in Brazil:
ZAKEN IMPORTAÇÃO e
EXPORTAÇÃO Ltda.
T +55 (0) 11 4243 7348
E info@zaken.com.br
www.zaken.com.br
And here you can find the Distrisbutor overview: www.ortlieb.com/en_us/ortlieb-international
Are you selling it with bottom mounting points?
Hello,
yes the frame mount pivot bearing M5 and M6 are included
kind regards
Your ORTLIEB-Team
Je ne comprends pas, si tu n'as pas de filetage prévu 🤔 Il faut percer le cadre...???
Hello Frank, If you don't have a thread in the frame, you can use the Quick Rack Seat Stay Adapter.: www.ortlieb.com/en_us/quick-rack-seat-stay-adapter. Best Regards, your ORTLIEB-Team!😊
This is exactly what I need, but the seatpost mount and the seat stay adapters look made of plastic. Can these really withstand specified 15 kg load even in bumpy terrain?
What tire size is used in this demonstration video?
Hello, the Quick Rack is now even approved for 20kg. In the video, the Focus Atlas with 28-inch is used. The tire is a Wtb Riddler 45C. Best Regards, your ORTLIEB-Team!
can this be used with canyon grail 6? they removed the mount point for racks in that model:( I was wondering if this would help?
Hi, for bikes without M5 or M6 threaded eyelets, we have our Quick Rack Seat Stay Adapter which you find here: www.ortlieb.com/en_us/quick-rack-seat-stay-adapter
Best regards, your ORTLIEB-Team!
Do any of these racks fit 700cc wheels/29in wheels?? Need for bikepscking
The Quick Rack is suitable for 26” - 28” (limited suitability for 29” wheels - up to max. 2.35” tire width).
Unfortunately, we do not have another rack of this type in our range.
Will there be a matching Thru Axle for the carbon frames guys?
Hello and thank you for your message. You would only need an M5 or M6 thread on your frame. Then you can also mount the Quick-Rack on a carbon frame. No axe is required. Here you will find the datasheet: www.ortlieb.com/media/downloads/datasheet/en/quick_rack.pdf for more information. Best Regards, your ORTLIEB-Team!
@@ORTLIEBwaterproof I don’t have any screw points in the frame.
Is there an option like tailfin does with the Thru Axle?
Hey @@cyclingmrcl we are working on that!😉 Best Regards, your ORTLIEB-Team!
@@ORTLIEBwaterproof hi is there any update on the thru axle or will the tailfin thru axle work with your rack?
Hello@@vincentguerin6747, the Quick Rack (Light) was designed for mounting on the seat stay with M5/M6 or the adapter.
The Quick Rack (Light) is only capable to fit tires up to 30/622 when mounted at a thru axle.
Currently we can't give updates to development process, but we're working on a solution for these fitting problems.
Best Regards, your ORTLIEB-Team!🙃
Does anyone know if this works with Serious Gravix One? A guy at my local bikestore told me that its really hard to find something that works with my bike.
Here you will find all the important information and points you need to check to see if the Quick Rack fits your bike: www.ortlieb.com/media/downloads/datasheet/en/quick_rack.pdf. If you still have questions, please contact our customer service directly. (customerservice@ortlieb.com).
Have a 700x38C whee.l Is ti possible to install it? What is the maximum distance between the truaxle and the quickrack to let the wheel turning without touching?
Hello Ludovic, here you can find the instructions: www.ortlieb.com/media/downloads/anleitung/quick_rack.pdf
With a 700x38C wheel should fit the Quick Rack. Best Regards, your ORTLIEB-Team!
@@ORTLIEBwaterproof thanks. the French dealer sent me a pocture with the distance.
Hallo, kann man denn Quick Rack auch anbauen wenn schon ein Schutzblech vorhanden ist?
Hallo Markus, das Schutzblech zum Quick Rack ist separat erhältlich. Wenn du also schon ein Schutzblech hast, sollte der Quick Rack in den meisten Fällen trotzdem pasen. Hier noch ein Link zu unserem Datenblatt: www.ortlieb.com/media/downloads/datasheet/de/quick_rack.pdf. Dort findest du alle Daten auf die du achten solltest. Viele Grüße, dein ORTLIEB-Team!
Can it be attach to the Canyon "Pathlith ON 5" ebike?
Hi Bryan, your Bike needs a M5 or M6 thread on the frame. For bikes without M5 or M6 threaded eyelets, we have our Quick Rack Seat Stay Adapter (www.ortlieb.com/en_us/quick-rack-seat-stay-adapter). Take a look at the datasheet for more information: www.ortlieb.com/media/downloads/datasheet/en/quick_rack.pdf.
Best regards, your ORTLIEB-Team! :)
@@ORTLIEBwaterproof These don't fit to Canyon roadlite 7 even though they have the M5 holes. There's no room for the quick release mechanisms, the seat stays are in the way. It can be installed with extra washers, but even then it cannot be installed horizontally.
Would it work at the front ?
Unfortunately, the Quick Rack does not work as a front rack.
Will the MIK mount fit in this rack?
The Quick Rack does not have a MIK system.
But the Rack Three would have a MIK interface on the top of the platform. Just take a look at the Rack Three here: www.ortlieb.com/en_us/rack-three.
@@ORTLIEBwaterproofI mean I already have the MIK mount. I wonder if I can fit it to the QR rack.
@@GladysReyes-u4m The MIK mount should fit on the Quick Rack. 😊
@@ORTLIEBwaterproofthank you! I bought a MIK plate and it did fit ◡̈
Can this be used on single track, techy terrain? What’s the weight limit? Thank you
Hello, the Quick Rack has a release up to 20kg. Here you will find the data sheet, where you can find the most important information and whether it fits your bike: www.ortlieb.com/media/downloads/datasheet/en/quick_rack.pdf. Best Regards, your ORTLIEB-Team!
Does anyone know if this can be mounted to a aero seatpost?
That should not be a problem. Here you will find the data sheet with all the important information: www.ortlieb.com/media/downloads/datasheet/en/quick_rack_light.pdf.
Great.
Quick mounting system looks great, but useless on gravel bikes with thru axle mounting (far more reliable than eyelets). Distance of Ortlieb mount to rack is only 36 cm (14.2"). On a 28"/29" wheel, there's less than 5 cm (2") space left for the tire height plus mud clearance. Unbelievable why Ortlieb Product Managers did not use a 38+ cm (15"+) distance like Trek, Cube, Tubus, and Old Man Mountain. Hope they fix this in a new version.
Hello,
thank you for your feedback.
The Quick Rack is not designed to be mounted at the thru axle of Gravel- or Moutainbikes. It was desigened to be as reliable and cost efficient as possible by using existing M5/M6 threads inside the frame (seat stays) or adapters as mounting points. But since the demand for other solutions are also very high, we are working on such updates.
Kind regards, Your ORTLIEB-Team
It doesn't mount to the axle at all, it mounts to studs bolted to the frame
@@ORTLIEBwaterproofisn‘t the seat stay adapter the solution to that? Does it work with carbon bikes?
Please contact our customer service department, who will get back to you as soon as possible. Our e-mail address is customerservice@ortlieb.com
I have it mounted to my Niner Sir 9 with 2.235 inch tires. Not sure what you are talking about.
want to buy, but In Indonesia
Hello Eddy, we do not have a distributor in Indonesia. You can contact our distributor in Thailand: K-TRADE INTERNATIONAL
CO., Ltd.
T +66 (0) 2711 4700
E info@k-trade-international.com
www.urban-aktive.com
You should be able to get the Quick Rack there. Best Regards, your ORTLIEB-Team!
Охуеть как сложно было купить этот багажник в РФ, но какой же он удобный, когда надо быстро его убрать или поставить!
Ortlieb the best! :D
👍🥰
1:23 아이렛에 하지말고 qr레버 엑슬레버로 나오면 좋겠어요^^
Its pronounced artlieb? I have been saying it wrong...
No it’s not. It’s really just an „O“
So a Tailfin copy then....
But at a reasonable price point
too mutch plastic :-(
Too Quick to see something and understanding how to do... show more the hands and not so Quick please...
Von Tailfin geklaut.
Marc looks great, too;)