NO U MUST NOT CONNECT SPEAKER DIRECTLY TO THE BOARD! You need to use amplifier
No not necessarily. An ESP32 has two DAC. They are low-bit low-power DACs, but still. If it's enough for your project theres no reason to overengineer it
@@MikeHarris1984 Oh really? Okay, that's a shame. For most cases the old/standard ESP32 models are sufficient (and cheaper) fortunately.
@@comedyclub333 yeah, working on a project and needing audio from my esp32 and it's been a pain. Then got a max98357a and still just silence. Using the test audio on the sound amp GitHub, but serial is reading the SD card, listed the tracks, for the bitrate info and everything, then says playing and a second later says finished. So sound is proving to be difficult for me, lol. But yeah. In my research, that's where I found the dac is removed from S3. But, esspresif said the S3 has a high frequency pwm which can be used like a dac
I doubt that the ESP32 would be that powerful for either the speakers or the audio itself.
It is. The output power and bit depth of the internal DACs is shot, though, so your audio quality will suffer. But it is in pronciple enough to process audio data and play sound.
The Esp32 has 2 dacs so yes you can connect it directly to speaker if its a small one. For those large speakers you would destroy the chip with that load. If you are pushing such huge speakers use a opamp or audio amp to prevent the speakers from killing the chip from power draw. The same can be said for anything else. Use amps or transistors if you intend to drive large loads ( Stuff that use More power than Leds)
the dacs are pretty low resolution so they wouldn’t sound good even on appropriate sized speakers. Better to use an external dac over I2S
Esp is must be in pain cuz of that 4 ohm load💀
how did you get vintage speakers
they are hard to just have lying around
Stunning audio quality 😂
Wait since the transmission is yhrough wifi does that mean it is loseless audio?
Hi, I am using the same code in the video. After installing the library, the code successfully compiles but I hear no audio when I connect the DAC pins to a headphone. Any guidance on how to solve this would be helpful.
Thanks!
I have question how can i reduce the buzzing sound
If you're reading this, please, do not connect any kind of coil directly to esp32, this may damage the board and in worst cases, the USB port of your PC
Esp32 even easily broken by direct connect to small buzzer
*the Bluetooth device is really to pair*
" Bluetooth headphones " ??? 😂 I think that's what you meant haha 🤣
how to blow esp32`s DAC
I want to learn this can anyone guide me
How can we send serial data alog with bluetooth speaker
Code ???
This does not supply an AC voltage for the speakers but a dc voltage
why not use an amplifier instead of abusing the esp32 by directly hooking the speakers?
Ye jo Bluetooth module hai iska link de do bhai koi accha wola or sasta jo 10w +10w 2 speaker chal sake plz bhai
what is the code
vas a quemar la placa en pocos minutos
your bluetooth device is ready to connect
Speaker ka kya name hai
I’m literally creating a speaker from wire, cones and magnets.
Whats the device which is used to connect external speakers to ??
esp32 - speakers in this video. It is also possible through an external DAC. Here is an example ua-cam.com/video/24pk28oqVQI/v-deo.html
Dont do this people. Good way to destroy your board. Back EMF from inductor (speaker coils)
it's rather insane current draw from 4 Ohm speakers, that's why amplifiers are used
33mW , the not enough to move the paper cone 1/10 h if a millimetre
Tv woofers 👌😭
Bhai kuch to explain karte jo nhi jante aur jaanne ki koshish kar rhe ho unka kia??
This is not fake he needs a amplifier I made this mistake before
Day 126 of shearching the programs that are in that bluetooth thing
Hooking up a 2Ω inductive load directly to a gpio pin on an esp32 is all kinds of stupid.
No bass
Fake 👎
Ha, when you can spot fake video
What code are you using?
Code github.com/pschatzmann/ESP32-A2DP and full video ua-cam.com/video/CuziyraVFk0/v-deo.html
How much volt you give this board
@@afyu i also have these two speaker but i don't know how to make bt speaker lithium battery operated
I use the TP4056 charge controller, 18650 batteries. I connect to the plan on the contacts VIN (4.2v) and GND (-) ESP32 DevKit board
How to remove that noise any idea?
@@Utkrant_Hingonekaryou can use any audio amplifier, the most common are TDA2003, LM386 PAM8610 TPA3110 you need to use an external voltage source or make a low power class a with a transistor
😅😂😅😢😂
Overcurrent!
Whoever calls it fake it's not fake he needs an amplifier
@@schokodrache3793 dude it's not the reason why I can say this is not because it's a circuit do-it-yourself it is possible because all about coding and programming it looks like you don't know I might not know how to do the coding but I know how the coding work's
@@EnifOfficial not as powerful with my Arduino I can just connect two wires and make tone's play
1000% fake….
Where can i buy that speakers both wires
You cant do that with aplifier lol
Esp32 : bro pls stop pls im dying
😂 that's what I thought too lol