Im a plumber with some hydronics experience, looking to familiarize myself and possibly branch into forced air. I greatly appreciate your content! I can only critique what i know, and that is soldering. The soldering you demonstrated is unsatisfactory. Yes, it holds, but for how long. Heat the tube first, then move your torch to the fitting, then to the back of the fitting. Capillary action will pull the solder to the back of the socket, ensuring complete coverage. What I witnessed was essentially a cold, capped joint. Anyway, I'm still stoked to have found this, but wanted to offer constructive criticsm.
I completed HVAC trade school in August 2024 and earned my EPA 608 Universal certification. I'm now seeking an apprentice position to kickstart my career in HVAC. I came across your fantastic training videos and absolutely love them-by far the best HVAC channel on UA-cam. Thumbs up!
This is awsome your a good man my friend. I wish I knew someone like you I got hurt at my job and lost my job while getting medical care. My ac/heat pump went out and we have to go without because I simply cannot afford a new one. Nice to know people like you still exist!!!!!!!!
Thank you for the free training. I really appreciate it. We are getting close to replacing our ac and will definitely be following your video , One problem, "Awesomest" 😂made my day . All the very best 👍
Looks like ICP Day and Night just needs cleaning and maintenance? Our Day and night comfort series installed in 2016 in Arizona and never had any problems, Just clean myself and check and replace capacitors. check for service port leaks and brass cap. Will replace condenser fan or oil it this winter. ICP is probably the best bang for the buck. How is the metal tubing on Alpine air compare? Copper or Aluminum? compressor type, series, brand?
Hey Dave, what an amazing job brother, I know they were very excited about it being free now, did I hear her say twins😃. I've gotta say I'm a little jealous, 😉 my system of 34 years finally took a dump last month when it was 100°+ here in NC. I ended up getting a Trane 14 seer that cost me $12,000🥵, on top of that a water leak under my house that was $1000 t get fixed. I could've saved a ton of money if I wasn't disabled. Funny thing is in April, I made my last payment on my house!😅 Sometimes ya just can't get ahead my friend. Anywho, Awesome thing y'all done for that couple, you will have many blessings come your way. God Bless you and yours my brother, take care! New Subscriber!!! ~Jay~
The system you are removing looks about 20 years newer than my 30 year old Carrier. This is a really good example of what NOT CHANGING YOUR FILTER OFTEN and not cleaning your condenser and evaporator coils will get you. Take care of your system and eat filet mignon, don't, and eat hot dogs
Yeah, I'd recommend people to save money on a air purifier and buy the high quality air filters instead. better for your air quality, you dont need one in each room, and they have HEPA filters for the standard 1 x 20 x 20
You should be using the thermo trap putty on that valve, super easy to use and doesn't make a mess like the paste does. Reusable so it's not a one off cost and saves you time and from burning things up
Great video. You’re doing yeoman’s work. Wish we had honest and decent HVAC guys like you in the Denver area. Everyone here is all about ripping people off for the most money possible.
First let me say that I love your videos- very helpful. Now just an observation on my part and please correct me if I’m wrong but the reason you were not able to pump this unit down is because the condensing unit is a micro channel coil and if you pump it down it could damage the coil and that is why the safety blew when you tried to pump it down? I noticed that when u first hooked up the gauges and I wanted to see what happened so in a way this has served as a very good training video for all of us newbies out here. Again- this is not a criticism of your work but rather an observation on my part.
Personally I would work on fundamentals. If you're going up seer rating most coils require more airflow due to more surface area. Txv can only do so much. Risk flooding back. I always try to think about the house, duct and mechanical side. Entire system. Also use Silfoss and a torch set. That's high pressure refrigerant.
Widow'd 90yr Mom's AC just tanked...and her husband & son's 1968 family custom picturefaming business has tanked primarily due to DC mayor's Covid Lockdown Policy. Sucks
any thoughts on carrier furnace and ac unit? a gentleman in area he said we will replace the ac unit, coil, and furnace all foe 6k. is that a good deal?
It appears there is always a few ways to get to the finish line. I believe the topic for this video eas so that homeowner not afraid of getting their hands dirty may be able to install rhe system. If they have problems they can always call an HVAC tech to help. Yes may cost some mony but not thousands to correct.
Just curious how do you recover the Refrigerant out of the unit after you cut the lines? Do you pinch the lines and braze them Shut? Curious minds want to know.
@@bluejay713 well most of the stuff is rebadged resellers stuff but not sure why rename mr cool lol, its just a gree unit, all you really need to know is which one is midea and which one is gree
@@Dimka2 Hi i checked hvac direct they still sale Mr cool brands i didnt see any that says Infinty series but i have seen that on there web site it just came out this year.
@@Dimka2 Hi i know some videos iv seen on mr cool went bad after a few months the blue ridge he installed today i don't know enough about them but they are cheaper then the mr cool.
My question maybe I missed it, the old system was 410, what was wrong with it besides needing a good cleaning. Was there major damage or did we just want give or put in a new system? "2024, R-454B is the new refrigerant that will gradually replace R-410A. The EPA has mandated the phaseout of R-410A by 2025... Should not be installing units with 410 only to again charge the customer to replace the refrigerant. This is not going to be like r22. which will prohibit production, importation, and distribution of 410. Thank the guy you voted into office... Thanks I enjoy the videos.
You didn’t check air flow and you didn’t remove the shipping bolt from the furnace blower and I’m assuming the old unit was 410a because you never showed flushing the old copper.
Are you letting all your viewers know that the moment one of them mess up and leak all the refrigerant out, that unless they are 608 certified, they’ll have to pay a technician anyways to come out to put refrigerant in the system. Just saying.
DIY HVAC install? This is definitely not a good idea because there are many people who can't even operate a shopping cart and you are suggesting that these people mess with pressurized gas and electrical? This would be how people can get hurt and end up burning their house down. This type of work needs to be done by professional installers.
Its okay if tour a Yank doing this but where i am from anyone who is not a fully qualified Refrigeration and Air-conditioning Mechanic and/or does not hold a restricted electrical license or refrigeration handling license is illegal and can result in None warranty and also injury if working with electricity and refrigerants. Most commonsense people just ring the professionals rather than stealing food from their mouths by DIY'ing an Aircon system you paid top dollar to train through college an apprenticeship years and hours. Do you see doctors creating content on how to do your own hear surgery. No of course. Anyone thinking of a DIY ac install must be very carefull not to void warranty.
Also what rookie uses a butane torch instead of oxy acetylene? The reason why people shouldn't be able to do this themselves is because they lack the knowledge of superheat and sub cooling, they have no idea if someone did a load calculation before the put in the unit. You know how I know this? Because my customers come in DAILY talking about how a homeowner screwed their system up so bad trying to do it themselves that cost themselves extra hundreds to thousands of dollars in extra work to fix their mistake.
How hard is it? Any number of moderately priced manifold perform the calculation for You. Clamp the dumb thermocouple under the pipe and fill her up until it hits. The sub cooling value stamp on the data plate. You’re acting like it’s rocket science and it’s not.
Im a plumber with some hydronics experience, looking to familiarize myself and possibly branch into forced air. I greatly appreciate your content! I can only critique what i know, and that is soldering. The soldering you demonstrated is unsatisfactory. Yes, it holds, but for how long. Heat the tube first, then move your torch to the fitting, then to the back of the fitting. Capillary action will pull the solder to the back of the socket, ensuring complete coverage. What I witnessed was essentially a cold, capped joint. Anyway, I'm still stoked to have found this, but wanted to offer constructive criticsm.
Agreed
👍🏽👍🏽
I completed HVAC trade school in August 2024 and earned my EPA 608 Universal certification. I'm now seeking an apprentice position to kickstart my career in HVAC. I came across your fantastic training videos and absolutely love them-by far the best HVAC channel on UA-cam. Thumbs up!
May God bless you and your family.
Hope DIY HVAC GUY Gets a Million Subscribers!
Thanks brotha!
@@diyhvacguy You are a Great HVAC Tech with Great heart and ❤ 👍❤️👏 Giving people Free AC and Heating System and GOD bless 🙏
Very nice of you give them Free Complete AC and Heating System with no Charge 👍❤️👍❤️👏
This is awsome your a good man my friend. I wish I knew someone like you I got hurt at my job and lost my job while getting medical care. My ac/heat pump went out and we have to go without because I simply cannot afford a new one. Nice to know people like you still exist!!!!!!!!
Thank you for the free training. I really appreciate it. We are getting close to replacing our ac and will definitely be following your video , One problem, "Awesomest" 😂made my day .
All the very best 👍
Haha I thought about editing that out but I was like “nah” 🤣
Looks like ICP Day and Night just needs cleaning and maintenance? Our Day and night comfort series installed in 2016 in Arizona and never had any problems, Just clean myself and check and replace capacitors. check for service port leaks and brass cap. Will replace condenser fan or oil it this winter. ICP is probably the best bang for the buck. How is the metal tubing on Alpine air compare? Copper or Aluminum? compressor type, series, brand?
Another professional job 🍻
Hey Dave, what an amazing job brother, I know they were very excited about it being free now, did I hear her say twins😃.
I've gotta say I'm a little jealous, 😉 my system of 34 years finally took a dump last month when it was 100°+ here in NC.
I ended up getting a Trane 14 seer that cost me $12,000🥵, on top of that a water leak under my house that was $1000 t get fixed. I could've saved a ton of money if I wasn't disabled. Funny thing is in April, I made my last payment on my house!😅 Sometimes ya just can't get ahead my friend. Anywho, Awesome thing y'all done for that couple, you will have many blessings come your way. God Bless you and yours my brother, take care! New Subscriber!!! ~Jay~
Thanks Jay!! Congrats on making your last payment!! 🙌🏼🙌🏼
The system you are removing looks about 20 years newer than my 30 year old Carrier. This is a really good example of what NOT CHANGING YOUR FILTER OFTEN and not cleaning your condenser and evaporator coils will get you. Take care of your system and eat filet mignon, don't, and eat hot dogs
Yeah, I'd recommend people to save money on a air purifier and buy the high quality air filters instead. better for your air quality, you dont need one in each room, and they have HEPA filters for the standard 1 x 20 x 20
Great job!
I love this channel, I was able to repair my ac and save a lot of money by watching your videos.
Thanks for doing this. You know insane prices that HVAC companies charge home owners these days.
And when you get a estimate they tell you that you need this and that like they did to me they wanted 20 grand for a 16 seer i said good bye.
They wanted 25 grand for me I have a 900 sq ft home 😂 I told em to kick rocks I’ll do it 🫡
Already wearing sweatshirts? Jealous. It was 100° here yesterday in DFW. Awesome job!
You should be using the thermo trap putty on that valve, super easy to use and doesn't make a mess like the paste does. Reusable so it's not a one off cost and saves you time and from burning things up
Hi when i moved my unit and brazed my line sets i just used a wet wet rage worked great no problems and the welds are still good after 20 years.
Great video. You’re doing yeoman’s work. Wish we had honest and decent HVAC guys like you in the Denver area. Everyone here is all about ripping people off for the most money possible.
First let me say that I love your videos- very helpful.
Now just an observation on my part and please correct me if I’m wrong but the reason you were not able to pump this unit down is because the condensing unit is a micro channel coil and if you pump it down it could damage the coil and that is why the safety blew when you tried to pump it down?
I noticed that when u first hooked up the gauges and I wanted to see what happened so in a way this has served as a very good training video for all of us newbies out here.
Again- this is not a criticism of your work but rather an observation on my part.
Condenser is not a microchannel, it is a traditional tube and fin coil.
Do you know what brand of compressors Alpine is using?
Personally I would work on fundamentals. If you're going up seer rating most coils require more airflow due to more surface area. Txv can only do so much. Risk flooding back. I always try to think about the house, duct and mechanical side. Entire system. Also use Silfoss and a torch set. That's high pressure refrigerant.
Why lug bottles around? Stay Brite 8 is stronger than brazing if done right.
What brand is your valve for the micron gauge?
Hi its a cps they sale them at TruTech tools.
@@bluejay713 Thank You!
Great video, thank you! Do you have more details on why you could not pump down with the old system compressor?
As a pro what brand condenser do recommend is the best
Widow'd 90yr Mom's AC just tanked...and her husband & son's 1968 family custom picturefaming business has tanked primarily due to DC mayor's Covid Lockdown Policy.
Sucks
Politicians have a lot to answer for!
any thoughts on carrier furnace and ac unit? a gentleman in area he said we will replace the ac unit, coil, and furnace all foe 6k. is that a good deal?
It appears there is always a few ways to get to the finish line. I believe the topic for this video eas so that homeowner not afraid of getting their hands dirty may be able to install rhe system. If they have problems they can always call an HVAC tech to help. Yes may cost some mony but not thousands to correct.
Thank you from Oklahoma!
Just curious how do you recover the Refrigerant out of the unit after you cut the lines? Do you pinch the lines and braze them Shut? Curious minds want to know.
Yesir, squeeze them shut and braze or solder them and then proceed the same as in this video. 👍🏼
With questions like you’re asking is why anyone who is not a technician has no business doing this themselves.
I couldn't quite hear how much you said the install cost. It sounded like $15,000.
How many hours did the job take?
8hrs
So imagine a homeowner with no hvac experience trying this? Lol
what happened to HVAC direct did they have some sorta fall out with mr cool seems like all the mr cool units been renamed infinity series
Hi iv noticed they change series every year seems like.
@@bluejay713 well most of the stuff is rebadged resellers stuff but not sure why rename mr cool lol, its just a gree unit, all you really need to know is which one is midea and which one is gree
@@Dimka2 Hi i checked hvac direct they still sale Mr cool brands i didnt see any that says Infinty series but i have seen that on there web site it just came out this year.
@@Dimka2 Hi i know some videos iv seen on mr cool went bad after a few months the blue ridge he installed today i don't know enough about them but they are cheaper then the mr cool.
I wish you were in my area!
GREAT!👑
My question maybe I missed it, the old system was 410, what was wrong with it besides needing a good cleaning. Was there major damage or did we just want give or put in a new system?
"2024, R-454B is the new refrigerant that will gradually replace R-410A. The EPA has mandated the phaseout of R-410A by 2025... Should not be installing units with 410 only to again charge the customer to replace the refrigerant. This is not going to be like r22. which will prohibit production, importation, and distribution of 410. Thank the guy you voted into office...
Thanks I enjoy the videos.
Plumbing copper and solder will not withstand refrigeration pressures. It will leak in no time
You didn’t check air flow and you didn’t remove the shipping bolt from the furnace blower and I’m assuming the old unit was 410a because you never showed flushing the old copper.
Ok now this is just nuts. Homeowners don’t do it is all imma say lol.
So now go be a member only for 400$ guys
Are you letting all your viewers know that the moment one of them mess up and leak all the refrigerant out, that unless they are 608 certified, they’ll have to pay a technician anyways to come out to put refrigerant in the system. Just saying.
👍👍👍👍👍👍👍👍👍👍👍
A++++++++++++++++++++
DIY HVAC install? This is definitely not a good idea because there are many people who can't even operate a shopping cart and you are suggesting that these people mess with pressurized gas and electrical? This would be how people can get hurt and end up burning their house down. This type of work needs to be done by professional installers.
Its okay if tour a Yank doing this but where i am from anyone who is not a fully qualified Refrigeration and Air-conditioning Mechanic and/or does not hold a restricted electrical license or refrigeration handling license is illegal and can result in None warranty and also injury if working with electricity and refrigerants.
Most commonsense people just ring the professionals rather than stealing food from their mouths by DIY'ing an Aircon system you paid top dollar to train through college an apprenticeship years and hours.
Do you see doctors creating content on how to do your own hear surgery. No of course.
Anyone thinking of a DIY ac install must be very carefull not to void warranty.
Also what rookie uses a butane torch instead of oxy acetylene? The reason why people shouldn't be able to do this themselves is because they lack the knowledge of superheat and sub cooling, they have no idea if someone did a load calculation before the put in the unit. You know how I know this? Because my customers come in DAILY talking about how a homeowner screwed their system up so bad trying to do it themselves that cost themselves extra hundreds to thousands of dollars in extra work to fix their mistake.
Your talking about using a oxy acetylene torch for brazing he's using staybright 8 solder and they got apps and books for the superheat and subcool.
How hard is it? Any number of moderately priced manifold perform the calculation for You. Clamp the dumb thermocouple under the pipe and fill her up until it hits. The sub cooling value stamp on the data plate. You’re acting like it’s rocket science and it’s not.
Haha these responses are spot on. Hvac isn’t brain surgery bro, I’m sorry you had to go to school and pay thousands of dollars. UA-cam academy is free
You guys realize installation takes no skill. Go be a refrigerationhvac service guy and tell me how easy it is lmao.
You don't need oxyacetylene to use solder, what rookie doesn't know that
@11:49: Personally, I'd much rather use a Wago to connect solid and stranded.
3:19 😂