Expansion Joint Repair and Restoration to Stop Water Leakage | Dr. Fixit Pidiseal PS

Expansion Joint Repair and Restoration to Stop Water Leakage | Dr. Fixit Pidiseal PS
In this video, I have explained the waterproofing treatment for expansion joint. This was an old expansion/construction joint from where the water leaking problem did appear.]
We carried out this treatment and steps have been mentioned in the video.
Products used here : Fiber Expansion Joint and Dr. Fixit Pidiseal PS
Contact Information :
MAVANI Waterproofing Mo. 9712666464 / 9510055555
AUDIO CREDITS / MUSIC: www.bensound.com​​
AUDIO CREDITS / MUSIC: www.dreamstime.com/stock-musi​...
#expansion_joint_repair #expansion_joint_waterproofing #expansion_joint #what_is_expansion_joint
link to my youtube channel: / civilengine​​. .
Email Address: [e-mail]
Contact: 9016464933

[@NishasKitchen]

Very nice

[@naveentanwar7333]

Super work Aisa kam Maine Aaj Tak nahin dekha

[@CivilEngineeringForum]

Thanks

[@rameshporandla6175]

Super

[@ankur8860]

👌🏻👌🏻👌🏻

[@INDIANATHEIST526]

Is it ne essary to widen the crack?

[@milindt820]

What’s the ratio for pidiseal and accelerator

[@nneptune1970]

Is your firm based out of Bangalore?

[@bhawnagoyal8700]

👍🏽👍🏽

[@vinothbakia9765]

Before filling PS 41g do we need to priming the surface? If yes Primeseal is ok?

[@CivilEngineeringForum]

Yes
Go ahead

[@naveentanwar7333]

Saree problem solve hoge is video Ko dekhkar

[@Adnan.ahmed124]

Is it work

[@SUMIT.118]

Bhai old slab or new slab ke joint me pani leak hota h kya kiya jay

[@25chinna]

Hai Sir I want this product how to purchase this

[@tissaspirant2aspiranthealt602]

I have applied this dr fixit.but it looks very rubbery instead of hard solid..is it right?

[@CivilEngineeringForum]

Yes,
But its main ourpose is not to allow water to pass through.
Strength is not required there

[@jagdishsing5679]

Hi

[@saraqasimvlogs3194]

It's life?? How many years this treatment. Can stop water leak

[@CivilEngineeringForum]

It will work 100%

[@saraqasimvlogs3194]

@@CivilEngineeringForum can you mention no of years I mean it's life

[@CivilEngineeringForum]

Dear, this is the permanent soultion.
Life time

[@DigitalConstructionWorld]

For expansion joint this is not the right method. First the expansion joint should not bond any where. Why r you cutting? Second use a quality sealant instead of Unknown material. Third the best method and look will be very nice install a galvanized angle bar both side and then install backer rod with selant.

[@DigitalConstructionWorld]

And should use flexcel board from below insted of cutting.

[@CivilEngineeringForum]

It is not bonding we are removing the previouly apply expansion joint.
We are retrofitting the structure in this video as mentioned

[@woodsnbricks4078]

Can you explain the angle bar

[@yadvindersingh965]

This is not perfact solution. Sorry am also in this field bt dr.... have only polymer base products that does not given full guarantee cos epoxy epecial products done more better than this & also have written guarantee