21:20 To be a bit fair, even Sonoff, on their own website, describe their Sonoff MINIR2 as having *DRY CONTACTS* which "support to [sic] connect dry contact sensors and various types of external switches, such as SPDT switches and NC/NO push button switches." I WISH I HAD WATCHED YOUR VIDEOS EARLIER! :(
Can you add a button to the input to manually trigger the recording and trigger an output as well? So if you see something out on the edge of the picture you want recorded, or someone you want scared away, to be able to trigger the output to turn on the strobe at the same time?
@CCTVSystemsUK why is there so mutch delay on my NVR, I see on my NVR the detection of a human, but the relay output trigger 6-8 sec later? Do you have a idee? Thanks in advance!
Hi, 6 - 8 seconds is an unusually long time. I've certainly never come across it before. Try unplugging all the cameras, other than one that you are using to trigger the output. Then turn the AI functions off on the disconnected cameras too Eg: intrusion / line crossing or face detection. Then, see if the trigger is quicker. I say this because these AI features on DVR's and NVR's are very heavy on the analytics side. This can slow the device down a geat deal. Certainly worth a try! 👍 Regards, Paul @CCTVSystemsUK
Just a quick question when the camera/alarm detects motion is there a way to have a internal chime like ring with hikvision maybe link a ezviz chime to dvr not sure if this is possible
Hi, Good question 🤔 The honest is I have never tried to be perfectly honest, but it may be possible if, say, your chime was controlled or activated with the 'eWeLink' app. There is a way to use the email facility of the Hikvision device to activate devices that use sanoff relays / switches. I personally don't have anything to do with Ring products as I find them a little bit basic. So, my advice would be to dig deep into the control mechanisms of the chime you want to activate and try to match the protocols to achieve your goal. Good luck 👍 Regards, Paul CCTV Systems UK
Hi Scott, Yes, it can. I usually set them for human and vehicle recognition, which activates the alarm output that triggers a 12v to 240v relay to activate outdoor security lights. Hope this helps. Regards, Paul CCTV Systems UK @CCTVSystemUK
@@CCTVSystemsUK brilliant i was thinking of shed alarm and connecting a 12v siren and having a camera inside with human detection to reduce false alarms.
Thanks very much I've just setup my dvr with a master blaster using this method, works a treat, am very interested in the outdoor lights you mentioned look forward to that video
Excellent informaiton explaining how these alarm in/out pin works on HiKvison DVRs. Thanks you Paul. Cannot wait to see Part 3!
were is part 3 ?????????
an excellent presentation, clear for non-native English speakers
Very very complete description
Thanks you so much for this wonderful video !
I will add blue flash to scar burglars.
Clear and clean 🎉
21:20 To be a bit fair, even Sonoff, on their own website, describe their Sonoff MINIR2 as having *DRY CONTACTS* which "support to [sic] connect dry contact sensors and various types of external switches, such as SPDT switches and NC/NO push button switches."
I WISH I HAD WATCHED YOUR VIDEOS EARLIER! :(
Can you add a button to the input to manually trigger the recording and trigger an output as well?
So if you see something out on the edge of the picture you want recorded, or someone you want scared away, to be able to trigger the output to turn on the strobe at the same time?
Did you end up making a part 3 of this series?
Hi Paul, I can't find part three of the alarm out put (flood light)
Was it made?
Thank you, Leigh
@CCTVSystemsUK why is there so mutch delay on my NVR, I see on my NVR the detection of a human, but the relay output trigger 6-8 sec later?
Do you have a idee?
Thanks in advance!
Hi,
6 - 8 seconds is an unusually long time. I've certainly never come across it before.
Try unplugging all the cameras, other than one that you are using to trigger the output. Then turn the AI functions off on the disconnected cameras too Eg: intrusion / line crossing or face detection.
Then, see if the trigger is quicker. I say this because these AI features on DVR's and NVR's are very heavy on the analytics side. This can slow the device down a geat deal.
Certainly worth a try! 👍
Regards,
Paul
@CCTVSystemsUK
Just a quick question when the camera/alarm detects motion is there a way to have a internal chime like ring with hikvision maybe link a ezviz chime to dvr not sure if this is possible
Hi,
Good question 🤔
The honest is I have never tried to be perfectly honest, but it may be possible if, say, your chime was controlled or activated with the 'eWeLink' app.
There is a way to use the email facility of the Hikvision device to activate devices that use sanoff relays / switches.
I personally don't have anything to do with Ring products as I find them a little bit basic. So, my advice would be to dig deep into the control mechanisms of the chime you want to activate and try to match the protocols to achieve your goal.
Good luck 👍
Regards,
Paul
CCTV Systems UK
Hey mate. Cracking videos, loads of info - did you ever do part 3? Thanks mate
Excellent video !!!!
It's any way that I can program the time of the Siren ?
Can this be set so when the camera detects human it triggers alarm output?
Hi Scott,
Yes, it can. I usually set them for human and vehicle recognition, which activates the alarm output that triggers a 12v to 240v relay to activate outdoor security lights.
Hope this helps.
Regards,
Paul
CCTV Systems UK
@CCTVSystemUK
@@CCTVSystemsUK brilliant i was thinking of shed alarm and connecting a 12v siren and having a camera inside with human detection to reduce false alarms.
Either that or a masterblaster siren 😂😂 they wouldnt be returning afterwards
Thanks very much I've just setup my dvr with a master blaster using this method, works a treat, am very interested in the outdoor lights you mentioned look forward to that video
@@CCTVSystemsUK Hi, amazing system. What about turn off light when no motion after that ? It can be turn off after a time ?
What is the model of this dvr?
My day is NOT fantastic because UA-cam recommended some other video before this one :(
Any reason why once triggered camera's won't reset themselves, i need to go into app and turn off and turn back on.
Camera light can use for warning..but what happen my camera light not turn on?