GMC Sierra Dash Mount
Вставка
- Опубліковано 15 вер 2024
- Bulletpoint Mounting Solutions dash mount installation in a GMC Sierra. This heavy duty dash mount can handle phones, GoPro cameras, and even iPads. RubiGrid™ GMC Sierra + Chevrolet Silverado Dash Mount
Thanks for the video. I ordered one of these today for my Sierra 2500HD. It’s a little different but close to the one you have. They call “Rubigrid”. The lower portion fits the entire bottom section so you don’t have to center it. Also, it didn’t include mounting tape. Probably because it fits so well now and it mounts with 6 bolts vs 4. Also, I left the rubber cover on it. I just drilled right through it and it’s SOLID. Thanks again for the video and instruction. Good stuff!
Hope you enjoy it! Thanks for watching.
I have the same setup (fixed tray, not removable) in a 22 Silverado. I left the OEM rubber tray cover (makes it more snug), inserted the mount base and used some cutout rubber (bicycle tire tube) as shim between the sides of the mount nase and tray. That means no drilling for the base screws. No screws to undo when I want to remove the base mount and make adjustments to the attachment accessories! The mount holds solid even on rough roads.
Well done on this informative video, thank you.
Put tape on first, then drill holes.
Hey ya'll. I just order this Rubigrid insert for my 2019 RST. I agree that having the top slot open and exposing the mounting hole would look ugly, so I found a couple of inserts on Amazon made by a company called TufSkinz. The product is called TufSkinz Dashboard Top Cubby Foam Inserts. You can use just the top one or you can affix the bottom insert over the grid of the Rubigrid, minus what you're mounting, to avoid dust and debris from getting down inside it. Just my two cents. God bless.
Thanks for the info!
Just a note for anyone with a Silverado. I have a 21 RST and the bolt in mine is in the FRONT of the "tray" and said "tray" IS NOT REMOVABLE on mine. I have no idea why this is. And I have no idea why there's a screw there if the tray doesn't come out. So I don't see this working on my truck
It'll work, mine isnt removable either, it came with the 4 inserts and screws and works just fine, i installed it 2 weeks ago and have a 10" tablet & phone holder, aswell as the GoPro mount
I want one of these so bad but they don’t have it for our year/model! Must be time for a new truck! 😂
😂😂😂
Gotta spend 70k so u can buy a $150 phone mount
How much trouble did you have getting the shim in the crack to take out the piece? My 7mm bolt is further down than yours is and that came out ok but I can not get the darn pry thing in there to pull it from the clips.
I just read others with the same problem. I guess that piece doesn't come out of all models.
It was a little tough getting it in there and it’s not stiff enough. I actually edited out my first try, it was pretty embarrassing. Lol
Yours doesn’t come out. Figured you knew by now but they changed it, if it’s in the middle it won’t come out
My 22 rst it did not come out !
The manufacturer should provide a template for their mount. For $86 bucks, come on!
That’s what I said too!
It’s been a year how’s it holding up?
Just like new. I mount a GoPro and rear camera screen on it quite often. No problems.
Thank you I ordered mine yesterday
How do you clean under it
I don’t know, I haven’t tried yet.
High pressure blower, like ones they have at Quick Quack car wash at their vacuum bays.
Looks ok but then after removing the tray you have that ugly screw hole left there without being able to put the cover tray back in
You mount the system to the tray and replace it and the screw. You can’t even see the screw hole when you’re finished and sitting in the seat.