How To Make DIY Ups For Wi-Fi Router & ONU

Creating a DIY Uninterruptible Power Supply (UPS) for a Wi-Fi router and Optical Network Unit (ONU) can ensure uninterrupted internet connectivity during power outages. Here’s a step-by-step guide to making one:
Materials Needed
1. *12V Battery* (sealed lead-acid or LiFePO4 recommended)
2. *12V DC-DC Converter* (adjustable output voltage)
3. *Battery Charger* (compatible with your battery type)
4. *Diodes* (to prevent current backflow)
5. *Connectors and Wires*
6. *Fuse* (for protection)
7. *Enclosure* (optional, for safety)
Tools Needed
- Soldering iron and solder
- Wire cutters/strippers
- Multimeter (for testing)
- Screwdriver (for enclosure)
Steps
1. *Select the Battery:*
- Choose a battery with sufficient capacity for your needs. A 12V 7Ah battery can typically power a router and ONU for several hours.
2. *Connect the Battery to the DC-DC Converter:*
- Connect the battery's positive terminal to the DC-DC converter’s input positive terminal.
- Connect the battery's negative terminal to the DC-DC converter’s input negative terminal.
3. *Adjust the DC-DC Converter:*
- Use a multimeter to set the output voltage of the DC-DC converter to match the voltage required by your router and ONU (commonly 9V or 12V).
4. *Set Up the Battery Charger:*
- Connect the battery charger to the battery terminals.
- Ensure the charger is suitable for your battery type and connect it to the AC mains to keep the battery charged.
5. *Incorporate Diodes:*
- Install a diode between the charger and battery to prevent discharge back into the charger.
- Install another diode between the battery and DC-DC converter to prevent current backflow into the battery from the devices.
6. *Install a Fuse:*
- Add a fuse in the positive line between the battery and DC-DC converter for short circuit protection.
7. *Connect the Router and ONU:*
- Use appropriate connectors to attach the DC-DC converter output to the power inputs of your router and ONU.
- Double-check the polarity to avoid damaging the devices.
8. *Testing:*
- Before connecting your devices, verify the output voltage with a multimeter.
- Connect your router and ONU, and then test the setup by disconnecting AC power. The devices should continue running on battery power.
9. *Enclosure (Optional):*
- Place the setup in an enclosure for safety and neatness. Ensure proper ventilation for the battery and electronics.
Safety Tips
- Handle batteries carefully as they store significant energy.
- Insulate all connections properly to prevent short circuits.
- Regularly check the battery’s health and replace it when its capacity diminishes.
By following these steps, you can create a reliable DIY UPS for your Wi-Fi router and ONU, ensuring continuous internet connectivity during power outages.
Here You Can Learn many diy idea
Follow Facebook Page: www.facebook.c...
Background Music Credit:
Track: NCS The Best Of Drum & Bass Mix
Music provided by NoCopyrightSounds.
Watch:• MIX - The Best Of Drum & Bass | NCS -...

[@aquaworldbangladesh6946]

So long boring video

[@diycreativeideas7465]

I Understand.This Video is in detail that's why it took so long. basically its for beginners.

[@brahmanandadas729]

Change all songs

[@diycreativeideas7465]

Why???

[@brahmanandadas729]

@@diycreativeideas7465 all are rock songs